Source

Coin / src / elements / SoCullElement.cpp

/**************************************************************************\
 * Copyright (c) Kongsberg Oil & Gas Technologies AS
 * All rights reserved.
 * 
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are
 * met:
 * 
 * Redistributions of source code must retain the above copyright notice,
 * this list of conditions and the following disclaimer.
 * 
 * Redistributions in binary form must reproduce the above copyright
 * notice, this list of conditions and the following disclaimer in the
 * documentation and/or other materials provided with the distribution.
 * 
 * Neither the name of the copyright holder nor the names of its
 * contributors may be used to endorse or promote products derived from
 * this software without specific prior written permission.
 * 
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
\**************************************************************************/

/*!
  \class SoCullElement SoCullElement.h Inventor/elements/SoCullElement.h
  \brief The SoCullElement class is used internally for render and pick culling.
  \ingroup elements

  The element holds all planes the geometry should be inside, and
  keeps a bitflag to signal which planes need to be tested.

  This element is an extension for Coin, and is not available in the
  original Open Inventor.

  The maximum number of planes in this element is 32, which should be
  more than enough, since the view frustum is represented by 6 planes,
  and the maximum number of OpenGL clipping planes is typically 6 or
  8.

  This element is designed for fast culling, and will not do optimal
  view frustum culling; a box might not be culled even though it is
  outside the view frustum. The assumption is that the view frustum is
  small compared to the world model. The element simply records all
  planes to be culled against, and the graph is not culled until it is
  completely outside one of the planes.

  SoCullElement is not active for other actions than SoGLRenderAction.
  It's possible to enable it for SoCallbackAction by updating it in
  a post camera callback though. Do something like this:

  \verbatim

  static SoCallbackAction::Response
  camera_cb(void * data, SoCallbackAction * action, const SoNode * node)
  {
    SoState * state = action->getState();
    SoCullElement::setViewVolume(state, SoViewVolumeElement::get(state));
    return SoCallbackAction::CONTINUE;
  }

  [...]
  SoCallbackAction cba(myviewport);
  cba.addPostCallback(SoCamera::getClassTypeId(), camera_cb, NULL);

  \endverbatim

  When the view volume is set in SoCullElement in the post camera
  callback, SoCallbackAction will perform culling on Separators and
  other nodes in the same way as SoGLRenderAction.

*/

#include <Inventor/elements/SoCullElement.h>
#include <Inventor/elements/SoModelMatrixElement.h>
#include <Inventor/misc/SoState.h>
#include <Inventor/SbBox3f.h>
#include <Inventor/SbViewVolume.h>
#include <cstring>
#include <cassert>

#include "coindefs.h"
#include "SbBasicP.h"

#if COIN_DEBUG
#include <Inventor/errors/SoDebugError.h>
#endif // COIN_DEBUG

SO_ELEMENT_SOURCE(SoCullElement);

// doc from parent
void
SoCullElement::initClass(void)
{
  SO_ELEMENT_INIT_CLASS(SoCullElement, inherited);
}

/*!
  The destructor.
*/
SoCullElement::~SoCullElement()
{
}

// doc from parent
void
SoCullElement::init(SoState * COIN_UNUSED_ARG(state))
{
  this->numplanes = 0;
  this->flags = 0;
  this->vvindex = -1;
}

// doc from parent
void
SoCullElement::push(SoState * COIN_UNUSED_ARG(state))
{
  const SoCullElement * prev = coin_assert_cast<const SoCullElement *>
    (
     this->getNextInStack()
     );

  this->flags = prev->flags;
  this->numplanes = prev->numplanes;
  this->vvindex = prev->vvindex;
  for (int i = 0; i < prev->numplanes; i++) this->plane[i] = prev->plane[i];
}

/*!
  Sets the current view volume. In effect, this adds six planes to
  the list of culling planes.  If a view volume has already been
  set, the old view volume planes are overwritten by the new ones.
  The view volume must be in the world coordinate systems.
*/
void
SoCullElement::setViewVolume(SoState * state, const SbViewVolume & vv)
{
  SoCullElement * elem = coin_safe_cast<SoCullElement *>
    (
     SoElement::getElement(state, classStackIndex)
     );
  if (elem) {
    if (elem->numplanes + 6 > SoCullElement::MAXPLANES) { // _very_ unlikely
#if COIN_DEBUG
      SoDebugError::postWarning("SoCullElement::setViewVolume",  "too many planes");
#endif // COIN_DEBUG
      return;
    }
    int i;
    SbPlane vvplane[6];
    vv.getViewVolumePlanes(vvplane);
    if (elem->vvindex >= 0) { // overwrite old view volume
      for (i = 0; i < 6; i++) {
        elem->plane[elem->vvindex+i] = vvplane[i];
        elem->flags &= ~(1<<(elem->vvindex+i));
      }
    }
    else {
      elem->vvindex = elem->numplanes;
      for (i = 0; i < 6; i++) elem->plane[elem->numplanes++] = vvplane[i];
    }
  }
}

/*!
  Add plane geometry must be inside. The plane must be in the world
  coordinate system.
*/
void
SoCullElement::addPlane(SoState * state, const SbPlane &newplane)
{
  SoCullElement * elem =
    coin_safe_cast<SoCullElement *>
    (
     SoElement::getElement(state, classStackIndex)
     );
  if (elem) {
    if (elem->numplanes >= SoCullElement::MAXPLANES) {  // _very_ unlikely
#if COIN_DEBUG
      SoDebugError::postWarning("SoCullElement::addPlane",  "too many planes");
#endif // COIN_DEBUG
      return;
    }
    elem->plane[elem->numplanes++] = newplane;
  }
}

/*!
  Cull against \a box. If \a transform is \c TRUE, the box is assumed
  to be in object space, and will be transformed into world space
  using the model matrix.  Returns \c TRUE if box is outside one of
  the planes, and updates the element to detect when geometry is
  completely inside all planes.
*/
SbBool
SoCullElement::cullBox(SoState * state, const SbBox3f & box, const SbBool transform)
{
  return SoCullElement::docull(state, box, transform, TRUE);
}

/*!
  Cull against \a box. If \a transform is \c TRUE, the box is
  assumed to be in object space, and will be transformed into world
  space using the model matrix.  Returns \c TRUE if box is outside one
  of the planes. This method will not update the element state, just
  perform a cull test against active planes.
*/
SbBool
SoCullElement::cullTest(SoState * state, const SbBox3f & box, const SbBool transform)
{
  return SoCullElement::docull(state, box, transform, FALSE);
}

/*!
  Returns \c TRUE if the current geometry is completely inside all
  planes. There is no need to do a cull test if this is the case.
*/
SbBool
SoCullElement::completelyInside(SoState * state)
{
  // use SoState::getConstElement() to avoid cache dependency on this element
  const SoCullElement * elem = coin_assert_cast<const SoCullElement *>
    (
     state->getConstElement(classStackIndex)
     );
  unsigned int mask = 0x0001 << elem->numplanes;
  return elem->flags == (mask-1);
}

// Documented in superclass. Overridden to assert that this method is
// not called for this element.
SbBool
SoCullElement::matches(const SoElement *) const
{
  assert(0 && "should not get here");
  return FALSE;
}

// Documented in superclass. Overridden to assert that this method is
// not called for this element.
SoElement *
SoCullElement::copyMatchInfo(void) const
{
  assert(0 && "should not get here");
  return NULL;
}

//
// private method which does the actual culling
//
SbBool
SoCullElement::docull(SoState * state, const SbBox3f & box, const SbBool transform,
                      const SbBool updateelem)
{
  // try to avoid a push if possible
  const SoCullElement * elem = coin_safe_cast<const SoCullElement *>
    (
     state->getElementNoPush(classStackIndex)
    );

  if (!elem) return FALSE;

  int i, j;
  SbVec3f min, max;
  min = box.getMin();
  max = box.getMax();
  SbVec3f pts[8];

  SbMatrix mm;
  SbBool identity = ! transform;
  if (transform) {
    SbBool wasopen = state->isCacheOpen();
    // close the cache, since we don't create a cache dependency on
    // the model matrix element
    state->setCacheOpen(FALSE);
    mm = SoModelMatrixElement::get(state);
    state->setCacheOpen(wasopen);
  }

  // create the 8 box corner points
  for (i = 0; i < 8; i++) {
    pts[i][0] = i & 1 ? min[0] : max[0];
    pts[i][1] = i & 2 ? min[1] : max[1];
    pts[i][2] = i & 4 ? min[2] : max[2];
    if (!identity) mm.multVecMatrix(pts[i], pts[i]);
  }

  const int n = elem->numplanes;
  unsigned int flags = elem->flags;
  const SbPlane * planes = elem->plane;
  unsigned int mask = 0x0001;

  for (i = 0; i < n; i++, mask<<=1) {
    if (!(flags & mask)) {
      int in = 0;
      int out = 0;
      for (j = 0; j < 8; j++) {
        if (planes[i].isInHalfSpace(pts[j])) in++;
        else out++;
      }
      if (in == 8) {
        flags |= mask;
      }
      else if (out == 8) {
        return TRUE;
      }
    }
  }
  if (updateelem && (flags != elem->flags)) {
    // force a push if necessary
    SoCullElement * elem = coin_assert_cast<SoCullElement *>
      (
       SoElement::getElement(state, classStackIndex)
       );
    elem->flags = flags;
  }
  return FALSE;
}
Tip: Filter by directory path e.g. /media app.js to search for public/media/app.js.
Tip: Use camelCasing e.g. ProjME to search for ProjectModifiedEvent.java.
Tip: Filter by extension type e.g. /repo .js to search for all .js files in the /repo directory.
Tip: Separate your search with spaces e.g. /ssh pom.xml to search for src/ssh/pom.xml.
Tip: Use ↑ and ↓ arrow keys to navigate and return to view the file.
Tip: You can also navigate files with Ctrl+j (next) and Ctrl+k (previous) and view the file with Ctrl+o.
Tip: You can also navigate files with Alt+j (next) and Alt+k (previous) and view the file with Alt+o.