stretchedthin avatar stretchedthin committed a07ff17

connectagram

Comments (0)

Files changed (4)

var/vabs/connectagram/src/connectagram.SlackBuild

+#!/usr/bin/bash
+# This script assumes it will be launched within "/NAME/VERSION/src" dir.
+# With all sources in "src" Your Vector Linux .txz package, slack-desc,
+# and slack-required will be found in "VERSION" dir. The extraction and
+# build will be in a temp dir created in "NAME" dir, and then removed on exit.
+# Comment out second to last line to keep this dir intact.
+#
+# This Template was compiled from the contributions of many users of the Vector
+# Linux forum at http://forum.vectorlinux.com and from tidbits collected 
+# from all over the internet. 
+#
+# Generated by sbbuilder-0.4.15, written by Rodrigo Bistolfi 
+# (rbistolfi) and Raimon Grau Cuscó (Kidd) for VectorLinux.
+#
+# Please put your name below if you add some original scripting lines.
+# AUTHORS = 
+##Thanks to the people at http://slackbuilds.org for the references drawn from thier SlackBuild.
+
+NAME="connectagram"            #Enter package Name!
+VERSION=${VERSION:-"1.1.1"}      #Enter package Version!
+VER=$(echo ${VERSION}|sed 's/-/_/') #this fixes - in version
+VL_PACKAGER=${VL_PACKAGER:-"stretchedthin"}   #Enter your Name!
+LINK=${LINK:-"http://gottcode.org/${NAME}/${NAME}-${VERSION}-src.tar.bz2"}  #Enter URL for package here!
+
+
+#SYSTEM VARIABLES
+#----------------------------------------------------------------------------
+BUILDNUM=${BUILDNUM:-"1"}
+VL_VERSION=${VL_VERSION:-"$(ls /var/log/packages/|grep vlconfig2|cut -d "-" -f4|cut -c 2-5)"}
+BUILD=${BUILD:-"$BUILDNUM""$VL_VERSION"}
+ARCH=${ARCH:-"$(uname -m)"}
+CONFIG_OPTIONS=${CONFIG_OPTIONS:-""}
+LDFLAG_OPTIONS=${LDFLAG_OPTIONS:-""}
+ADDRB=${ADDRB:-""} #Add deps that need to be added to the slack-required file here
+EXRB=${EXRB:-""} #Add deps that need to be excluded from the slack-required file here
+MAKEDEPENDS=${MAKEDEPENDS:-""} #Add deps needed TO BUILD this package here.
+#----------------------------------------------------------------------------
+
+# DO NOT EXECUTE if NORUN is set to 1
+if [ "$NORUN" != "1" ]; then
+
+#SETUP PACKAGING ENVIRONMENT
+#--------------------------------------------
+CWD=$(pwd)
+cd ../
+RELEASEDIR=$(pwd)
+cd $CWD
+mkdir -p $RELEASEDIR/tmp
+TMP=$RELEASEDIR/tmp
+PKG=$TMP/package-${NAME}
+#--------------------------------------------
+
+
+
+if [ $UID != 0 ]; then
+   echo "You are not authorized to run this script. Please login as root"
+   exit 1
+fi
+
+if [ ! -x /usr/bin/requiredbuilder ]; then
+   echo "Requiredbuilder not installed, or not executable."
+   exit 1
+fi
+
+if [ $VL_PACKAGER = "YOURNAME" ]; then
+   echo 'Who are you?
+   Please edit VL_PACKAGER=${VL_PACKAGER:-YOURNAME} in this script.
+   Change the word "YOURNAME" to your VectorLinux packager name.
+   You may also export VL_PACKAGER, or call this script with
+   VL_PACKAGER="YOUR NAME HERE"'
+   exit 1
+fi
+
+
+#CFLAGS SETUP
+#--------------------------------------------
+if [[ "$ARCH" = i?86 ]]; then
+  ARCH=i586
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  CONFIGURE_TRIPLET="i486-vector-linux"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fpic"
+  CONFIGURE_TRIPLET="x86_64-vlocity-linux"
+  LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "powerpc" ]; then
+  SLKCFLAGS="-O2"
+  CONFIGURE_TRIPLET="powerpc-vlocity-linux"
+  LIBDIRSUFFIX=""
+fi
+
+export CFLAGS="$SLKCFLAGS $CFLAG_OPTIONS"
+export CXXFLAGS=$CFLAGS
+export LDFLAGS="$LDFLAGS $LDFLAG_OPTIONS"
+#--------------------------------------------
+
+
+#GET THE SOURCE
+#--------------------------------------------
+for SRC in $(echo $LINK);do
+if [ ! -f $CWD/$(basename $SRC) ]
+then
+        wget --no-check-certificate -c $SRC
+fi
+done
+#--------------------------------------------
+
+
+rm -rf $PKG
+cd $TMP
+rm -rf ${NAME}-${VERSION}
+
+
+#EXTRACT SOURCES
+#-----------------------------------------------------
+echo "Extracting source..."
+tar xvf $CWD/${NAME}-${VERSION}-src.tar.bz2
+#this moves whatever was extracted to the std dirname we are expecting
+mv * ${NAME}-${VERSION} &> /dev/null 2>&1
+mkdir -p $PKG
+#-----------------------------------------------------
+
+
+cd $TMP/${NAME}-${VERSION}
+
+
+#PATCHES
+#-----------------------------------------------------
+# Put any Patches here *NOTE this only works if all 
+# your patches use the -p1 strip option!
+#-----------------------------------------------------
+for i in $CWD/patches/*;do
+  patch -p1 <$i
+  mkdir -p $PKG/usr/doc/${NAME}-${VERSION}/patches/
+  cp $i $PKG/usr/doc/${NAME}-${VERSION}/patches/
+done
+#-----------------------------------------------------
+ 
+ 
+
+#SET PERMISSIONS
+#-----------------------------------------
+echo "Setting permissions..."
+chown -R root:root .
+find . -perm 664 -exec chmod 644 {} \;
+find . -perm 777 -exec chmod 755 {} \;
+find . -perm 2777 -exec chmod 755 {} \;
+find . -perm 775 -exec chmod 755 {} \;
+find . -perm 2755 -exec chmod 755 {} \;
+find . -perm 774 -exec chmod 644 {} \;
+find . -perm 666 -exec chmod 644 {} \;
+find . -perm 600 -exec chmod 644 {} \;
+find . -perm 444 -exec chmod 644 {} \;
+find . -perm 400 -exec chmod 644 {} \;
+find . -perm 440 -exec chmod 644 {} \;
+find . -perm 511 -exec chmod 755 {} \;
+find . -perm 711 -exec chmod 755 {} \;
+find . -perm 555 -exec chmod 755 {} \;
+#-----------------------------------------
+
+
+
+#CONFIGURE & MAKE
+#----------------------------------------------------------------------
+# If you are building a KDE-related app, then change the following
+# arguments in the script below:
+# --prefix=$(kde-config -prefix) \
+# --sysconfdir=/etc/kde \
+#
+# Making these changes will ensure that your package will build in the
+# correct path and that it will work seamlessly within the KDE environment.
+#
+#-----------------------------------------------------------------------
+
+echo "Configuring source..."
+mkdir build
+cd build
+qmake PREFIX=$PKG/usr ../
+CFLAGS="$SLKCFLAGS" make
+make install
+cd ..
+
+# install custom wordlists
+install -D $CWD/wordlists/hu $PKG/usr/share/connectagram/data/hu/words
+
+mkdir -p $PKG/usr/doc/$NAME-$VERSION/
+cp -a ChangeLog COPYING CREDITS INSTALL \
+	$PKG/usr/doc/$NAME-$VERSION/
+cat $CWD/$NAME.SlackBuild > $PKG/usr/doc/$NAME-$VERSION/$NAME.SlackBuild
+find $PKG/usr/doc -type f -exec chmod 0644 {} \;
+
+
+#######################################################################
+#Miscellenious tweaks and things outside a normal ./configure go here #
+#######################################################################
+if test -f $CWD/$NAME.png; then
+mkdir -p $PKG/usr/share/pixmaps
+cp $CWD/$NAME.png $PKG/usr/share/pixmaps/$NAME.png; fi
+## Now test for desktop file
+mkdir -p $PKG/usr/share/applications
+if test -f $CWD/${NAME}.desktop; then
+cp $CWD/$NAME.desktop $PKG/usr/share/applications/$NAME.desktop
+fi
+
+
+
+mkdir -p $PKG/usr/doc/${NAME}-${VERSION}
+cp -a AUTHORS COPYING ChangeLog Credits MANIFEST README TODO \
+$PKG/usr/doc/${NAME}-${VERSION}
+cat $CWD/${NAME}.SlackBuild > $PKG/usr/doc/${NAME}-${VERSION}/${NAME}.SlackBuild
+
+#----------------------------------------------------------------------
+
+if [ -d $PKG/usr/share/man ];then
+mkdir -p $PKG/usr/man
+mv $PKG/usr/share/man/* $PKG/usr/man
+rm -rf $PKG/usr/share/man
+fi
+find $PKG/usr/man -type f -exec gzip -9 {} \;
+
+if [ -d $PKG/usr/share/info ];then
+mkdir -p $PKG/usr/info
+mv $PKG/usr/share/info/* $PKG/usr/info
+rm -rf $PKG/usr/share/info
+fi 
+find $PKG/usr/info -type f -exec gzip -9 {} \;
+
+mkdir -p $PKG/install
+if [ -d $PKG/usr/info ];then
+cat >> $PKG/install/doinst.sh << EOF
+CWD=\$(pwd)
+cd usr/info
+if [ -f dir ];then
+    rm dir
+fi
+if [ -f dir.gz ];then
+    rm dir.gz
+fi
+for i in *.info.gz;do
+    install-info \$i dir
+done
+cd \$CWD
+EOF
+fi
+
+# Add schemas install to the doinst.sh if schemas are found.
+if [ -d $PKG/etc/gconf/schemas ];then
+# Make sure we have gconftool installed
+echo "if [ -x usr/bin/gconftool-2 ]; then" >> $PKG/install/doinst.sh
+( cd $PKG/etc/gconf/schemas
+for schema in *.schemas; do
+ # Install schemas
+ echo "GCONF_CONFIG_SOURCE=\"xml::etc/gconf/gconf.xml.defaults\" \
+   usr/bin/gconftool-2 --makefile-install-rule \
+   etc/gconf/schemas/${schema} >/dev/null 2>&1" \
+   >> $PKG/install/doinst.sh
+done;
+)
+# Finish off gconf block
+echo "fi" >> $PKG/install/doinst.sh
+fi
+cat $CWD/doinst.sh >> $PKG/install/doinst.sh
+
+
+#if there is a slack-desc in src dir use it
+if test -f $CWD/slack-desc; then
+cp $CWD/slack-desc $RELEASEDIR/slack-desc
+else
+# This creates the white space in front of "handy-ruler" in slack-desc below.
+
+LENGTH=$(expr length "${NAME}")
+SPACES=0
+SHIM=""
+until [ "$SPACES" = "$LENGTH" ]; do
+SHIM="$SHIM "
+let SPACES=$SPACES+1
+done
+
+# Fill in the package summary between the () below.
+# Then package the description, License, Author and Website.
+# There may be no more then 11 ${NAME}: lines in a valid slack-desc.
+
+cat > $RELEASEDIR/slack-desc << EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$SHIM|-----handy-ruler------------------------------------------------------|
+${NAME}: ${NAME} ()
+${NAME}:
+${NAME}: 
+${NAME}: 
+${NAME}: 
+${NAME}: 
+${NAME}:
+${NAME}:
+${NAME}: License: GPL
+${NAME}: Authors: 
+${NAME}: Website: 
+
+EOF
+fi
+cat >> $RELEASEDIR/slack-desc << EOF
+
+
+
+#----------------------------------------
+BUILDDATE: $(date)
+PACKAGER:  $VL_PACKAGER
+HOST:      $(uname -srm)
+DISTRO:    $(cat /etc/vector-version)
+CFLAGS:    $CFLAGS
+LDFLAGS:   $LDFLAGS
+CONFIGURE: $(awk "/\\$\ \.\/configure\ /" $TMP/$DIRNAME/config.log)
+
+EOF
+
+cat $RELEASEDIR/slack-desc > $PKG/install/slack-desc
+
+#STRIPPING
+#------------------------------------------------------------------------------------------------------------------
+cd $PKG
+echo " "
+echo "Stripping...."
+echo " "
+find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+#------------------------------------------------------------------------------------------------------------------
+
+
+#FINISH PACKAGE
+#--------------------------------------------------------------
+echo "Finding dependencies..."
+ADD="$ADDRB" EXCLUDE="$EXRB" requiredbuilder -v -y -s $RELEASEDIR $PKG
+echo "Creating package ${NAME}-${VERSION}-$ARCH-$BUILD.txz"
+makepkg -l y -c n $RELEASEDIR/${NAME}-${VERSION}-$ARCH-$BUILD.txz
+
+cd $CWD
+echo "Cleaning up temp files..." && rm -rf $TMP
+echo "Package Complete"
+fi
+#--------------------------------------------------------------
+
+# vim: set tabstop=4 shiftwidth=4 foldmethod=marker : ##

var/vabs/connectagram/src/doinst.sh

+if [ -x /usr/bin/update-desktop-database ]; then
+  /usr/bin/update-desktop-database -q usr/share/applications >/dev/null 2>&1
+fi
+
+if [ -x /usr/bin/update-mime-database ]; then
+  /usr/bin/update-mime-database usr/share/mime >/dev/null 2>&1
+fi
+
+if [ -e usr/share/icons/hicolor/icon-theme.cache ]; then
+  if [ -x /usr/bin/gtk-update-icon-cache ]; then
+    /usr/bin/gtk-update-icon-cache usr/share/icons/hicolor >/dev/null 2>&1
+  fi
+fi
+

var/vabs/connectagram/src/slack-desc

+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+            |-----handy-ruler------------------------------------------------------|
+connectagram: connectagram (word unscrambling game)
+connectagram:
+connectagram: Connectagram is a word unscrambling game. The board consists of
+connectagram: several scrambled words that are joined together. You can choose the
+connectagram: length of the words, the amount of words, and the pattern that the
+connectagram: words are arranged in.
+connectagram:
+connectagram:
+connectagram: Homepage: http://gottcode.org/connectagram/
+connectagram:
+connectagram:

var/vabs/connectagram/src/wordlists

+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN">
+<html>
+ <head>
+  <title>Index of /slackbuilds/14.0/games/connectagram/wordlists</title>
+ </head>
+ <body>
+<h1>Index of /slackbuilds/14.0/games/connectagram/wordlists</h1>
+<table><tr><th><img src="/icons/blank.gif" alt="[ICO]"></th><th><a href="?C=N;O=D">Name</a></th><th><a href="?C=M;O=A">Last modified</a></th><th><a href="?C=S;O=A">Size</a></th><th><a href="?C=D;O=A">Description</a></th></tr><tr><th colspan="5"><hr></th></tr>
+<tr><td valign="top"><img src="/icons/back.gif" alt="[DIR]"></td><td><a href="/slackbuilds/14.0/games/connectagram/">Parent Directory</a></td><td>&nbsp;</td><td align="right">  - </td><td>&nbsp;</td></tr>
+<tr><td valign="top"><img src="/icons/unknown.gif" alt="[   ]"></td><td><a href="hu">hu</a></td><td align="right">29-Jun-2013 16:01  </td><td align="right"> 41K</td><td>&nbsp;</td></tr>
+<tr><th colspan="5"><hr></th></tr>
+</table>
+<address>Apache/2.2.24 (Unix) DAV/2 PHP/5.3.26 Server at slackbuilds.org Port 80</address>
+</body></html>
Tip: Filter by directory path e.g. /media app.js to search for public/media/app.js.
Tip: Use camelCasing e.g. ProjME to search for ProjectModifiedEvent.java.
Tip: Filter by extension type e.g. /repo .js to search for all .js files in the /repo directory.
Tip: Separate your search with spaces e.g. /ssh pom.xml to search for src/ssh/pom.xml.
Tip: Use ↑ and ↓ arrow keys to navigate and return to view the file.
Tip: You can also navigate files with Ctrl+j (next) and Ctrl+k (previous) and view the file with Ctrl+o.
Tip: You can also navigate files with Alt+j (next) and Alt+k (previous) and view the file with Alt+o.