Anonymous avatar Anonymous committed e3cb242

Add mate-file-manager-share to vabs

Signed-off-by: Lee Pak Hong <benreilly@vector.Linux.net>;

Comments (0)

Files changed (1)

var/vabs/mate-file-manager-share/src/mate-file-manager-share.SlackBuild

+#!/usr/bin/bash
+# This script assumes it will be launched within "/NAME/VERSION/src" dir.
+# With all sources in "src" Your Vector Linux .txz package, slack-desc,
+# and slack-required will be found in "VERSION" dir. The extraction and
+# build will be in a temp dir created in "NAME" dir, and then removed on exit.
+# Comment out second to last line to keep this dir intact.
+#
+# This Template was compiled from the contributions of many users of the Vector
+# Linux forum at http://forum.vectorlinux.com and from tidbits collected 
+# from all over the internet. 
+#
+# Generated by sbbuilder-0.4.14.1, written by Rodrigo Bistolfi 
+# (rbistolfi) and Raimon Grau Cuscó (Kidd) for VectorLinux.
+#
+# Please put your name below if you add some original scripting lines.
+# AUTHORS = 
+
+NAME="mate-file-manager-share"            #Enter package Name!
+VERSION=${VERSION:-"1.6.0"}      #Enter package Version!
+VER=$(echo $VERSION|sed 's/-/_/') #this fixes - in version
+VL_PACKAGER=${VL_PACKAGER:-"hata_ph"}   #Enter your Name!
+LINK=${LINK:-"http://pub.mate-desktop.org/releases/1.6/$NAME-$VERSION.tar.xz"}  #Enter URL for package here!
+
+
+#SYSTEM VARIABLES
+#----------------------------------------------------------------------------
+BUILDNUM=${BUILDNUM:-"1"}
+VL_VERSION=${VL_VERSION:-"$(ls /var/log/packages/|grep vlconfig2|cut -d "-" -f4|cut -c 2-5)"}
+BUILD=${BUILD:-"$BUILDNUM""$VL_VERSION"}
+ARCH=${ARCH:-"$(uname -m)"}
+CONFIG_OPTIONS=${CONFIG_OPTIONS:-""}
+LDFLAG_OPTIONS=${LDFLAG_OPTIONS:-""}
+ADDRB=${ADDRB:-""} #Add deps that need to be added to the slack-required file here
+EXRB=${EXRB:-""} #Add deps that need to be excluded from the slack-required file here
+MAKEDEPENDS=${MAKEDEPENDS:-"mate-common mate-doc-utils glib2 gtk+2 mate-file-manager"} #Add deps needed TO BUILD this package here.
+#----------------------------------------------------------------------------
+
+# DO NOT EXECUTE if NORUN is set to 1
+if [ "$NORUN" != "1" ]; then
+
+#SETUP PACKAGING ENVIRONMENT
+#--------------------------------------------
+CWD=$(pwd)
+cd ../
+RELEASEDIR=$(pwd)
+cd $CWD
+mkdir -p $RELEASEDIR/tmp
+TMP=$RELEASEDIR/tmp
+PKG=$TMP/package-$NAME
+#--------------------------------------------
+
+
+
+if [ $UID != 0 ]; then
+   echo "You are not authorized to run this script. Please login as root"
+   exit 1
+fi
+
+if [ ! -x /usr/bin/requiredbuilder ]; then
+   echo "Requiredbuilder not installed, or not executable."
+   exit 1
+fi
+
+if [ $VL_PACKAGER = "YOURNAME" ]; then
+   echo 'Who are you?
+   Please edit VL_PACKAGER=${VL_PACKAGER:-YOURNAME} in this script.
+   Change the word "YOURNAME" to your VectorLinux packager name.
+   You may also export VL_PACKAGER, or call this script with
+   VL_PACKAGER="YOUR NAME HERE"'
+   exit 1
+fi
+
+
+#CFLAGS SETUP
+#--------------------------------------------
+if [[ "$ARCH" = i?86 ]]; then
+  ARCH=i586
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  CONFIGURE_TRIPLET="i486-slackware-linux"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fpic"
+  CONFIGURE_TRIPLET="x86_64-slackware-linux"
+  LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "powerpc" ]; then
+  SLKCFLAGS="-O2"
+  CONFIGURE_TRIPLET="powerpc-vlocity-linux"
+  LIBDIRSUFFIX=""
+fi
+
+export CFLAGS="$SLKCFLAGS $CFLAG_OPTIONS"
+export CXXFLAGS=$CFLAGS
+export LDFLAGS="$LDFLAGS $LDFLAG_OPTIONS"
+#--------------------------------------------
+
+
+#GET THE SOURCE
+#--------------------------------------------
+for SRC in $(echo $LINK);do
+if [ ! -f $CWD/$(basename $SRC) ]
+then
+        wget --no-check-certificate -c $SRC
+fi
+done
+#--------------------------------------------
+
+
+rm -rf $PKG
+cd $TMP
+rm -rf $NAME-$VERSION
+
+
+#EXTRACT SOURCES
+#-----------------------------------------------------
+echo "Extracting source..."
+tar xvf $CWD/$NAME-$VERSION.tar.* || exit 1
+#this moves whatever was extracted to the std dirname we are expecting
+mv * $NAME-$VERSION &> /dev/null 2>&1
+mkdir -p $PKG
+#-----------------------------------------------------
+
+
+cd $TMP/$NAME-$VERSION
+
+
+#PATCHES
+#-----------------------------------------------------
+# Put any Patches here *NOTE this only works if all 
+# your patches use the -p1 strip option!
+#-----------------------------------------------------
+#for i in $CWD/patches/*;do
+#  patch -p1 <$i
+#  mkdir -p $PKG/usr/doc/$NAME-$VERSION/patches/
+#  cp $i $PKG/usr/doc/$NAME-$VERSION/patches/
+#done
+#-----------------------------------------------------
+ 
+ 
+
+#SET PERMISSIONS
+#-----------------------------------------
+echo "Setting permissions..."
+chown -R root:root .
+find . -perm 664 -exec chmod 644 {} \;
+find . -perm 777 -exec chmod 755 {} \;
+find . -perm 2777 -exec chmod 755 {} \;
+find . -perm 775 -exec chmod 755 {} \;
+find . -perm 2755 -exec chmod 755 {} \;
+find . -perm 774 -exec chmod 644 {} \;
+find . -perm 666 -exec chmod 644 {} \;
+find . -perm 600 -exec chmod 644 {} \;
+find . -perm 444 -exec chmod 644 {} \;
+find . -perm 400 -exec chmod 644 {} \;
+find . -perm 440 -exec chmod 644 {} \;
+find . -perm 511 -exec chmod 755 {} \;
+find . -perm 711 -exec chmod 755 {} \;
+find . -perm 555 -exec chmod 755 {} \;
+#-----------------------------------------
+
+
+
+#CONFIGURE & MAKE
+#----------------------------------------------------------------------
+# If you are building a KDE-related app, then change the following
+# arguments in the script below:
+# --prefix=$(kde-config -prefix) \
+# --sysconfdir=/etc/kde \
+#
+# Making these changes will ensure that your package will build in the
+# correct path and that it will work seamlessly within the KDE environment.
+#
+#-----------------------------------------------------------------------
+
+echo "Configuring source..."
+./autogen.sh 
+./configure --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --infodir=/usr/info \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --mandir=/usr/man \
+  --program-prefix="" \
+  --program-suffix="" \
+  --build=$CONFIGURE_TRIPLET \
+  $CONFIG_OPTIONS || exit 1
+
+make || exit 1
+
+make install DESTDIR=$PKG || exit 1
+
+
+#######################################################################
+#Miscellenious tweaks and things outside a normal ./configure go here #
+#######################################################################
+
+
+
+mkdir -p $PKG/usr/doc/$NAME-$VERSION
+cp -a AUTHORS COPYING ChangeLog INSTALL NEWS README \
+$PKG/usr/doc/$NAME-$VERSION
+cat $CWD/$NAME.SlackBuild > $PKG/usr/doc/$NAME-$VERSION/$NAME.SlackBuild
+
+#----------------------------------------------------------------------
+
+if [ -d $PKG/usr/share/man ];then
+mkdir -p $PKG/usr/man
+mv $PKG/usr/share/man/* $PKG/usr/man
+rm -rf $PKG/usr/share/man
+fi
+find $PKG/usr/man -type f -exec gzip -9 {} \;
+
+if [ -d $PKG/usr/share/info ];then
+mkdir -p $PKG/usr/info
+mv $PKG/usr/share/info/* $PKG/usr/info
+rm -rf $PKG/usr/share/info
+fi 
+find $PKG/usr/info -type f -exec gzip -9 {} \;
+
+mkdir -p $PKG/install
+if [ -d $PKG/usr/info ];then
+cat >> $PKG/install/doinst.sh << EOF
+CWD=\$(pwd)
+cd usr/info
+if [ -f dir ];then
+    rm dir
+fi
+if [ -f dir.gz ];then
+    rm dir.gz
+fi
+for i in *.info.gz;do
+    install-info \$i dir
+done
+cd \$CWD
+EOF
+fi
+
+# Add schemas install to the doinst.sh if schemas are found.
+if [ -d $PKG/etc/mateconf/schemas ];then
+# Make sure we have mateconftool installed
+echo "if [ -x usr/bin/mateconftool-2 ]; then" >> $PKG/install/doinst.sh
+( cd $PKG/etc/mateconf/schemas
+for schema in *.schemas; do
+ # Install schemas
+ echo "MATECONF_CONFIG_SOURCE=\"xml::etc/mateconf/mateconf.xml.defaults\" \
+   usr/bin/mateconftool-2 --makefile-install-rule \
+   etc/mateconf/schemas/${schema} >/dev/null 2>&1" \
+   >> $PKG/install/doinst.sh
+done;
+)
+# Finish off mateconf block
+echo "fi" >> $PKG/install/doinst.sh
+fi
+
+cat >> $PKG/install/doinst.sh << EOF
+# update rarian database
+if [ -x usr/bin/rarian-sk-update ]; then
+  usr/bin/rarian-sk-update 1> /dev/null 2> /dev/null
+fi
+
+# update mime database
+if [ -x usr/bin/update-mime-database ]; then
+  usr/bin/update-mime-database usr/share/mime 1> /dev/null 2> /dev/null
+fi
+
+# update desktop entries
+if [ -x usr/bin/update-desktop-database ]; then
+  usr/bin/update-desktop-database 1> /dev/null 2> /dev/null
+fi
+
+# update hicolor icons
+if [ -e usr/share/icons/hicolor/icon-theme.cache ]; then
+	rm -f usr/share/icons/hicolor/icon-theme.cache
+fi
+usr/bin/gtk-update-icon-cache -f -q usr/share/icons/hicolor 1>/dev/null 2>/dev/null
+
+if [ -x /usr/bin/glib-compile-schemas ]; then
+  /usr/bin/glib-compile-schemas usr/share/glib-2.0/schemas/ >/dev/null 2>&1
+fi
+
+# Restart gconfd-2 if running to reload new gconf settings
+if ps acx | grep -q gconfd-2 ; then
+        killall -HUP gconfd-2 ;
+fi
+
+# A good idea whenever kernel modules are added or changed:
+if [ -x sbin/depmod ]; then
+  /sbin/depmod -a 1> /dev/null 2> /dev/null
+fi
+EOF
+
+#if there is a slack-desc in src dir use it
+if test -f $CWD/slack-desc; then
+cp $CWD/slack-desc $RELEASEDIR/slack-desc
+else
+# This creates the white space in front of "handy-ruler" in slack-desc below.
+
+LENGTH=$(expr length "$NAME")
+SPACES=0
+SHIM=""
+until [ "$SPACES" = "$LENGTH" ]; do
+SHIM="$SHIM "
+let SPACES=$SPACES+1
+done
+
+# Fill in the package summary between the () below.
+# Then package the description, License, Author and Website.
+# There may be no more then 11 $NAME: lines in a valid slack-desc.
+
+cat > $RELEASEDIR/slack-desc << EOF
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+$SHIM|-----handy-ruler------------------------------------------------------|
+$NAME: $NAME (Caja-Share)
+$NAME:
+$NAME: mate-file-manager-share allows you to quickly share a folder from 
+$NAME: the MATE Caja file manager without requiring root access. It uses 
+$NAME: Samba, so your folders can be accessed by any operating system.
+$NAME: 
+$NAME: 
+$NAME:
+$NAME:
+$NAME: License: GPL
+$NAME: Authors: Refer to AUTHORS
+$NAME: Website: http://mate-desktop.org/
+
+EOF
+fi
+cat >> $RELEASEDIR/slack-desc << EOF
+
+
+
+#----------------------------------------
+BUILDDATE: $(date)
+PACKAGER:  $VL_PACKAGER
+HOST:      $(uname -srm)
+DISTRO:    $(cat /etc/vector-version)
+CFLAGS:    $CFLAGS
+LDFLAGS:   $LDFLAGS
+CONFIGURE: $(awk "/\\$\ \.\/configure\ /" $TMP/$DIRNAME/config.log)
+
+EOF
+
+cat $RELEASEDIR/slack-desc > $PKG/install/slack-desc
+
+#STRIPPING
+#------------------------------------------------------------------------------------------------------------------
+cd $PKG
+echo " "
+echo "Stripping...."
+echo " "
+find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+#------------------------------------------------------------------------------------------------------------------
+
+
+#FINISH PACKAGE
+#--------------------------------------------------------------
+echo "Finding dependencies..."
+ADD="$ADDRB" EXCLUDE="$EXRB" requiredbuilder -v -y -s $RELEASEDIR $PKG
+echo "Creating package $NAME-$VERSION-$ARCH-$BUILD.txz"
+makepkg -l y -c n $RELEASEDIR/$NAME-$VERSION-$ARCH-$BUILD.txz
+
+cd $CWD
+echo "Cleaning up temp files..." && rm -rf $TMP
+echo "Package Complete"
+fi
+#--------------------------------------------------------------
+
+# vim: set tabstop=4 shiftwidth=4 foldmethod=marker : ##
Tip: Filter by directory path e.g. /media app.js to search for public/media/app.js.
Tip: Use camelCasing e.g. ProjME to search for ProjectModifiedEvent.java.
Tip: Filter by extension type e.g. /repo .js to search for all .js files in the /repo directory.
Tip: Separate your search with spaces e.g. /ssh pom.xml to search for src/ssh/pom.xml.
Tip: Use ↑ and ↓ arrow keys to navigate and return to view the file.
Tip: You can also navigate files with Ctrl+j (next) and Ctrl+k (previous) and view the file with Ctrl+o.
Tip: You can also navigate files with Alt+j (next) and Alt+k (previous) and view the file with Alt+o.