Commits

Aleš Erjavec  committed ff74997

Added sphinx based rst documentation.

  • Participants
  • Parent commits 9f3d0fc

Comments (0)

Files changed (12)

 recursive-include orangekit/earth *.svg
 recursive-include src *.*
+recursive-include docs *.*
+
+prune docs/build
+
+include *.txt

File docs/Makefile

+# Makefile for Sphinx documentation
+#
+
+# You can set these variables from the command line.
+SPHINXOPTS    =
+SPHINXBUILD   = sphinx-build
+PAPER         =
+BUILDDIR      = build
+
+# User-friendly check for sphinx-build
+ifeq ($(shell which $(SPHINXBUILD) >/dev/null 2>&1; echo $$?), 1)
+$(error The '$(SPHINXBUILD)' command was not found. Make sure you have Sphinx installed, then set the SPHINXBUILD environment variable to point to the full path of the '$(SPHINXBUILD)' executable. Alternatively you can add the directory with the executable to your PATH. If you don't have Sphinx installed, grab it from http://sphinx-doc.org/)
+endif
+
+# Internal variables.
+PAPEROPT_a4     = -D latex_paper_size=a4
+PAPEROPT_letter = -D latex_paper_size=letter
+ALLSPHINXOPTS   = -d $(BUILDDIR)/doctrees $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) source
+# the i18n builder cannot share the environment and doctrees with the others
+I18NSPHINXOPTS  = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) source
+
+.PHONY: help clean html dirhtml singlehtml pickle json htmlhelp qthelp devhelp epub latex latexpdf text man changes linkcheck doctest gettext
+
+help:
+	@echo "Please use \`make <target>' where <target> is one of"
+	@echo "  html       to make standalone HTML files"
+	@echo "  dirhtml    to make HTML files named index.html in directories"
+	@echo "  singlehtml to make a single large HTML file"
+	@echo "  pickle     to make pickle files"
+	@echo "  json       to make JSON files"
+	@echo "  htmlhelp   to make HTML files and a HTML help project"
+	@echo "  qthelp     to make HTML files and a qthelp project"
+	@echo "  devhelp    to make HTML files and a Devhelp project"
+	@echo "  epub       to make an epub"
+	@echo "  latex      to make LaTeX files, you can set PAPER=a4 or PAPER=letter"
+	@echo "  latexpdf   to make LaTeX files and run them through pdflatex"
+	@echo "  latexpdfja to make LaTeX files and run them through platex/dvipdfmx"
+	@echo "  text       to make text files"
+	@echo "  man        to make manual pages"
+	@echo "  texinfo    to make Texinfo files"
+	@echo "  info       to make Texinfo files and run them through makeinfo"
+	@echo "  gettext    to make PO message catalogs"
+	@echo "  changes    to make an overview of all changed/added/deprecated items"
+	@echo "  xml        to make Docutils-native XML files"
+	@echo "  pseudoxml  to make pseudoxml-XML files for display purposes"
+	@echo "  linkcheck  to check all external links for integrity"
+	@echo "  doctest    to run all doctests embedded in the documentation (if enabled)"
+
+clean:
+	rm -rf $(BUILDDIR)/*
+
+html:
+	$(SPHINXBUILD) -b html $(ALLSPHINXOPTS) $(BUILDDIR)/html
+	@echo
+	@echo "Build finished. The HTML pages are in $(BUILDDIR)/html."
+
+dirhtml:
+	$(SPHINXBUILD) -b dirhtml $(ALLSPHINXOPTS) $(BUILDDIR)/dirhtml
+	@echo
+	@echo "Build finished. The HTML pages are in $(BUILDDIR)/dirhtml."
+
+singlehtml:
+	$(SPHINXBUILD) -b singlehtml $(ALLSPHINXOPTS) $(BUILDDIR)/singlehtml
+	@echo
+	@echo "Build finished. The HTML page is in $(BUILDDIR)/singlehtml."
+
+pickle:
+	$(SPHINXBUILD) -b pickle $(ALLSPHINXOPTS) $(BUILDDIR)/pickle
+	@echo
+	@echo "Build finished; now you can process the pickle files."
+
+json:
+	$(SPHINXBUILD) -b json $(ALLSPHINXOPTS) $(BUILDDIR)/json
+	@echo
+	@echo "Build finished; now you can process the JSON files."
+
+htmlhelp:
+	$(SPHINXBUILD) -b htmlhelp $(ALLSPHINXOPTS) $(BUILDDIR)/htmlhelp
+	@echo
+	@echo "Build finished; now you can run HTML Help Workshop with the" \
+	      ".hhp project file in $(BUILDDIR)/htmlhelp."
+
+qthelp:
+	$(SPHINXBUILD) -b qthelp $(ALLSPHINXOPTS) $(BUILDDIR)/qthelp
+	@echo
+	@echo "Build finished; now you can run "qcollectiongenerator" with the" \
+	      ".qhcp project file in $(BUILDDIR)/qthelp, like this:"
+	@echo "# qcollectiongenerator $(BUILDDIR)/qthelp/orangekitearth.qhcp"
+	@echo "To view the help file:"
+	@echo "# assistant -collectionFile $(BUILDDIR)/qthelp/orangekitearth.qhc"
+
+devhelp:
+	$(SPHINXBUILD) -b devhelp $(ALLSPHINXOPTS) $(BUILDDIR)/devhelp
+	@echo
+	@echo "Build finished."
+	@echo "To view the help file:"
+	@echo "# mkdir -p $$HOME/.local/share/devhelp/orangekitearth"
+	@echo "# ln -s $(BUILDDIR)/devhelp $$HOME/.local/share/devhelp/orangekitearth"
+	@echo "# devhelp"
+
+epub:
+	$(SPHINXBUILD) -b epub $(ALLSPHINXOPTS) $(BUILDDIR)/epub
+	@echo
+	@echo "Build finished. The epub file is in $(BUILDDIR)/epub."
+
+latex:
+	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
+	@echo
+	@echo "Build finished; the LaTeX files are in $(BUILDDIR)/latex."
+	@echo "Run \`make' in that directory to run these through (pdf)latex" \
+	      "(use \`make latexpdf' here to do that automatically)."
+
+latexpdf:
+	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
+	@echo "Running LaTeX files through pdflatex..."
+	$(MAKE) -C $(BUILDDIR)/latex all-pdf
+	@echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
+
+latexpdfja:
+	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
+	@echo "Running LaTeX files through platex and dvipdfmx..."
+	$(MAKE) -C $(BUILDDIR)/latex all-pdf-ja
+	@echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
+
+text:
+	$(SPHINXBUILD) -b text $(ALLSPHINXOPTS) $(BUILDDIR)/text
+	@echo
+	@echo "Build finished. The text files are in $(BUILDDIR)/text."
+
+man:
+	$(SPHINXBUILD) -b man $(ALLSPHINXOPTS) $(BUILDDIR)/man
+	@echo
+	@echo "Build finished. The manual pages are in $(BUILDDIR)/man."
+
+texinfo:
+	$(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
+	@echo
+	@echo "Build finished. The Texinfo files are in $(BUILDDIR)/texinfo."
+	@echo "Run \`make' in that directory to run these through makeinfo" \
+	      "(use \`make info' here to do that automatically)."
+
+info:
+	$(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
+	@echo "Running Texinfo files through makeinfo..."
+	make -C $(BUILDDIR)/texinfo info
+	@echo "makeinfo finished; the Info files are in $(BUILDDIR)/texinfo."
+
+gettext:
+	$(SPHINXBUILD) -b gettext $(I18NSPHINXOPTS) $(BUILDDIR)/locale
+	@echo
+	@echo "Build finished. The message catalogs are in $(BUILDDIR)/locale."
+
+changes:
+	$(SPHINXBUILD) -b changes $(ALLSPHINXOPTS) $(BUILDDIR)/changes
+	@echo
+	@echo "The overview file is in $(BUILDDIR)/changes."
+
+linkcheck:
+	$(SPHINXBUILD) -b linkcheck $(ALLSPHINXOPTS) $(BUILDDIR)/linkcheck
+	@echo
+	@echo "Link check complete; look for any errors in the above output " \
+	      "or in $(BUILDDIR)/linkcheck/output.txt."
+
+doctest:
+	$(SPHINXBUILD) -b doctest $(ALLSPHINXOPTS) $(BUILDDIR)/doctest
+	@echo "Testing of doctests in the sources finished, look at the " \
+	      "results in $(BUILDDIR)/doctest/output.txt."
+
+xml:
+	$(SPHINXBUILD) -b xml $(ALLSPHINXOPTS) $(BUILDDIR)/xml
+	@echo
+	@echo "Build finished. The XML files are in $(BUILDDIR)/xml."
+
+pseudoxml:
+	$(SPHINXBUILD) -b pseudoxml $(ALLSPHINXOPTS) $(BUILDDIR)/pseudoxml
+	@echo
+	@echo "Build finished. The pseudo-XML files are in $(BUILDDIR)/pseudoxml."

File docs/make.bat

+@ECHO OFF
+
+REM Command file for Sphinx documentation
+
+if "%SPHINXBUILD%" == "" (
+	set SPHINXBUILD=sphinx-build
+)
+set BUILDDIR=build
+set ALLSPHINXOPTS=-d %BUILDDIR%/doctrees %SPHINXOPTS% source
+set I18NSPHINXOPTS=%SPHINXOPTS% source
+if NOT "%PAPER%" == "" (
+	set ALLSPHINXOPTS=-D latex_paper_size=%PAPER% %ALLSPHINXOPTS%
+	set I18NSPHINXOPTS=-D latex_paper_size=%PAPER% %I18NSPHINXOPTS%
+)
+
+if "%1" == "" goto help
+
+if "%1" == "help" (
+	:help
+	echo.Please use `make ^<target^>` where ^<target^> is one of
+	echo.  html       to make standalone HTML files
+	echo.  dirhtml    to make HTML files named index.html in directories
+	echo.  singlehtml to make a single large HTML file
+	echo.  pickle     to make pickle files
+	echo.  json       to make JSON files
+	echo.  htmlhelp   to make HTML files and a HTML help project
+	echo.  qthelp     to make HTML files and a qthelp project
+	echo.  devhelp    to make HTML files and a Devhelp project
+	echo.  epub       to make an epub
+	echo.  latex      to make LaTeX files, you can set PAPER=a4 or PAPER=letter
+	echo.  text       to make text files
+	echo.  man        to make manual pages
+	echo.  texinfo    to make Texinfo files
+	echo.  gettext    to make PO message catalogs
+	echo.  changes    to make an overview over all changed/added/deprecated items
+	echo.  xml        to make Docutils-native XML files
+	echo.  pseudoxml  to make pseudoxml-XML files for display purposes
+	echo.  linkcheck  to check all external links for integrity
+	echo.  doctest    to run all doctests embedded in the documentation if enabled
+	goto end
+)
+
+if "%1" == "clean" (
+	for /d %%i in (%BUILDDIR%\*) do rmdir /q /s %%i
+	del /q /s %BUILDDIR%\*
+	goto end
+)
+
+
+%SPHINXBUILD% 2> nul
+if errorlevel 9009 (
+	echo.
+	echo.The 'sphinx-build' command was not found. Make sure you have Sphinx
+	echo.installed, then set the SPHINXBUILD environment variable to point
+	echo.to the full path of the 'sphinx-build' executable. Alternatively you
+	echo.may add the Sphinx directory to PATH.
+	echo.
+	echo.If you don't have Sphinx installed, grab it from
+	echo.http://sphinx-doc.org/
+	exit /b 1
+)
+
+if "%1" == "html" (
+	%SPHINXBUILD% -b html %ALLSPHINXOPTS% %BUILDDIR%/html
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.Build finished. The HTML pages are in %BUILDDIR%/html.
+	goto end
+)
+
+if "%1" == "dirhtml" (
+	%SPHINXBUILD% -b dirhtml %ALLSPHINXOPTS% %BUILDDIR%/dirhtml
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.Build finished. The HTML pages are in %BUILDDIR%/dirhtml.
+	goto end
+)
+
+if "%1" == "singlehtml" (
+	%SPHINXBUILD% -b singlehtml %ALLSPHINXOPTS% %BUILDDIR%/singlehtml
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.Build finished. The HTML pages are in %BUILDDIR%/singlehtml.
+	goto end
+)
+
+if "%1" == "pickle" (
+	%SPHINXBUILD% -b pickle %ALLSPHINXOPTS% %BUILDDIR%/pickle
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.Build finished; now you can process the pickle files.
+	goto end
+)
+
+if "%1" == "json" (
+	%SPHINXBUILD% -b json %ALLSPHINXOPTS% %BUILDDIR%/json
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.Build finished; now you can process the JSON files.
+	goto end
+)
+
+if "%1" == "htmlhelp" (
+	%SPHINXBUILD% -b htmlhelp %ALLSPHINXOPTS% %BUILDDIR%/htmlhelp
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.Build finished; now you can run HTML Help Workshop with the ^
+.hhp project file in %BUILDDIR%/htmlhelp.
+	goto end
+)
+
+if "%1" == "qthelp" (
+	%SPHINXBUILD% -b qthelp %ALLSPHINXOPTS% %BUILDDIR%/qthelp
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.Build finished; now you can run "qcollectiongenerator" with the ^
+.qhcp project file in %BUILDDIR%/qthelp, like this:
+	echo.^> qcollectiongenerator %BUILDDIR%\qthelp\orangekitearth.qhcp
+	echo.To view the help file:
+	echo.^> assistant -collectionFile %BUILDDIR%\qthelp\orangekitearth.ghc
+	goto end
+)
+
+if "%1" == "devhelp" (
+	%SPHINXBUILD% -b devhelp %ALLSPHINXOPTS% %BUILDDIR%/devhelp
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.Build finished.
+	goto end
+)
+
+if "%1" == "epub" (
+	%SPHINXBUILD% -b epub %ALLSPHINXOPTS% %BUILDDIR%/epub
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.Build finished. The epub file is in %BUILDDIR%/epub.
+	goto end
+)
+
+if "%1" == "latex" (
+	%SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.Build finished; the LaTeX files are in %BUILDDIR%/latex.
+	goto end
+)
+
+if "%1" == "latexpdf" (
+	%SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex
+	cd %BUILDDIR%/latex
+	make all-pdf
+	cd %BUILDDIR%/..
+	echo.
+	echo.Build finished; the PDF files are in %BUILDDIR%/latex.
+	goto end
+)
+
+if "%1" == "latexpdfja" (
+	%SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex
+	cd %BUILDDIR%/latex
+	make all-pdf-ja
+	cd %BUILDDIR%/..
+	echo.
+	echo.Build finished; the PDF files are in %BUILDDIR%/latex.
+	goto end
+)
+
+if "%1" == "text" (
+	%SPHINXBUILD% -b text %ALLSPHINXOPTS% %BUILDDIR%/text
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.Build finished. The text files are in %BUILDDIR%/text.
+	goto end
+)
+
+if "%1" == "man" (
+	%SPHINXBUILD% -b man %ALLSPHINXOPTS% %BUILDDIR%/man
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.Build finished. The manual pages are in %BUILDDIR%/man.
+	goto end
+)
+
+if "%1" == "texinfo" (
+	%SPHINXBUILD% -b texinfo %ALLSPHINXOPTS% %BUILDDIR%/texinfo
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.Build finished. The Texinfo files are in %BUILDDIR%/texinfo.
+	goto end
+)
+
+if "%1" == "gettext" (
+	%SPHINXBUILD% -b gettext %I18NSPHINXOPTS% %BUILDDIR%/locale
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.Build finished. The message catalogs are in %BUILDDIR%/locale.
+	goto end
+)
+
+if "%1" == "changes" (
+	%SPHINXBUILD% -b changes %ALLSPHINXOPTS% %BUILDDIR%/changes
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.The overview file is in %BUILDDIR%/changes.
+	goto end
+)
+
+if "%1" == "linkcheck" (
+	%SPHINXBUILD% -b linkcheck %ALLSPHINXOPTS% %BUILDDIR%/linkcheck
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.Link check complete; look for any errors in the above output ^
+or in %BUILDDIR%/linkcheck/output.txt.
+	goto end
+)
+
+if "%1" == "doctest" (
+	%SPHINXBUILD% -b doctest %ALLSPHINXOPTS% %BUILDDIR%/doctest
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.Testing of doctests in the sources finished, look at the ^
+results in %BUILDDIR%/doctest/output.txt.
+	goto end
+)
+
+if "%1" == "xml" (
+	%SPHINXBUILD% -b xml %ALLSPHINXOPTS% %BUILDDIR%/xml
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.Build finished. The XML files are in %BUILDDIR%/xml.
+	goto end
+)
+
+if "%1" == "pseudoxml" (
+	%SPHINXBUILD% -b pseudoxml %ALLSPHINXOPTS% %BUILDDIR%/pseudoxml
+	if errorlevel 1 exit /b 1
+	echo.
+	echo.Build finished. The pseudo-XML files are in %BUILDDIR%/pseudoxml.
+	goto end
+)
+
+:end

File docs/source/conf.py

+# -*- coding: utf-8 -*-
+#
+# orangekit.earth documentation build configuration file, created by
+# sphinx-quickstart on Mon Aug 26 11:49:18 2013.
+#
+# This file is execfile()d with the current directory set to its containing dir.
+#
+# Note that not all possible configuration values are present in this
+# autogenerated file.
+#
+# All configuration values have a default; values that are commented out
+# serve to show the default.
+
+import sys
+import os
+import ast
+
+# If extensions (or modules to document with autodoc) are in another directory,
+# add these directories to sys.path here. If the directory is relative to the
+# documentation root, use os.path.abspath to make it absolute, like shown here.
+#sys.path.insert(0, os.path.abspath('.'))
+
+# -- General configuration -----------------------------------------------------
+
+# If your documentation needs a minimal Sphinx version, state it here.
+#needs_sphinx = '1.0'
+
+# Add any Sphinx extension module names here, as strings. They can be extensions
+# coming with Sphinx (named 'sphinx.ext.*') or your custom ones.
+extensions = [
+    'sphinx.ext.autodoc', 'sphinx.ext.intersphinx', 'sphinx.ext.todo',
+    'sphinx.ext.mathjax', 'sphinx.ext.autosummary', 'numpydoc',
+]
+
+# Add any paths that contain templates here, relative to this directory.
+templates_path = ['_templates']
+
+# The suffix of source filenames.
+source_suffix = '.rst'
+
+# The encoding of source files.
+#source_encoding = 'utf-8-sig'
+
+# The master toctree document.
+master_doc = 'index'
+
+# Get the project meta info from the setup.py file
+dirname = os.path.dirname(__file__)
+
+setup_ast = ast.parse(
+    open(os.path.join(dirname, "..", "..", "setup.py")).read(),
+    "<source>")
+
+
+def ast_global_string(tree, name):
+    for stmt in tree.body:
+        if isinstance(stmt, ast.Assign) and \
+                len(stmt.targets) == 1 and \
+                isinstance(stmt.targets[0], ast.Name):
+            if stmt.targets[0].id == name:
+                return stmt.value.s
+    else:
+        raise ValueError("Could not extract {0!r} from the ast".format(name))
+
+# General information about the project.
+project = ast_global_string(setup_ast, "NAME")
+
+# project = u'orangekit.earth'
+copyright = u'2013, Bioinformatics Laboratory, FRI UL'
+
+# The version info for the project you're documenting, acts as replacement for
+# |version| and |release|, also used in various other places throughout the
+# built documents.
+#
+# The short X.Y version.
+version = ast_global_string(setup_ast, "VERSION")
+# version = '0.0.1'
+# The full version, including alpha/beta/rc tags.
+release = version
+# release = '0.0.1'
+
+# The language for content autogenerated by Sphinx. Refer to documentation
+# for a list of supported languages.
+#language = None
+
+# There are two options for replacing |today|: either, you set today to some
+# non-false value, then it is used:
+#today = ''
+# Else, today_fmt is used as the format for a strftime call.
+#today_fmt = '%B %d, %Y'
+
+# List of patterns, relative to source directory, that match files and
+# directories to ignore when looking for source files.
+exclude_patterns = []
+
+# The reST default role (used for this markup: `text`) to use for all documents.
+#default_role = None
+
+# If true, '()' will be appended to :func: etc. cross-reference text.
+#add_function_parentheses = True
+
+# If true, the current module name will be prepended to all description
+# unit titles (such as .. function::).
+#add_module_names = True
+
+# If true, sectionauthor and moduleauthor directives will be shown in the
+# output. They are ignored by default.
+#show_authors = False
+
+# The name of the Pygments (syntax highlighting) style to use.
+pygments_style = 'sphinx'
+
+# A list of ignored prefixes for module index sorting.
+#modindex_common_prefix = []
+
+# If true, keep warnings as "system message" paragraphs in the built documents.
+#keep_warnings = False
+
+
+# -- Options for HTML output ---------------------------------------------------
+
+# The theme to use for HTML and HTML Help pages.  See the documentation for
+# a list of builtin themes.
+html_theme = 'nature'
+
+# Theme options are theme-specific and customize the look and feel of a theme
+# further.  For a list of options available for each theme, see the
+# documentation.
+#html_theme_options = {}
+
+# Add any paths that contain custom themes here, relative to this directory.
+#html_theme_path = []
+
+# The name for this set of Sphinx documents.  If None, it defaults to
+# "<project> v<release> documentation".
+#html_title = None
+
+# A shorter title for the navigation bar.  Default is the same as html_title.
+#html_short_title = None
+
+# The name of an image file (relative to this directory) to place at the top
+# of the sidebar.
+#html_logo = None
+
+# The name of an image file (within the static path) to use as favicon of the
+# docs.  This file should be a Windows icon file (.ico) being 16x16 or 32x32
+# pixels large.
+#html_favicon = None
+
+# Add any paths that contain custom static files (such as style sheets) here,
+# relative to this directory. They are copied after the builtin static files,
+# so a file named "default.css" will overwrite the builtin "default.css".
+html_static_path = ['_static']
+
+# If not '', a 'Last updated on:' timestamp is inserted at every page bottom,
+# using the given strftime format.
+#html_last_updated_fmt = '%b %d, %Y'
+
+# If true, SmartyPants will be used to convert quotes and dashes to
+# typographically correct entities.
+#html_use_smartypants = True
+
+# Custom sidebar templates, maps document names to template names.
+#html_sidebars = {}
+
+# Additional templates that should be rendered to pages, maps page names to
+# template names.
+#html_additional_pages = {}
+
+# If false, no module index is generated.
+#html_domain_indices = True
+
+# If false, no index is generated.
+#html_use_index = True
+
+# If true, the index is split into individual pages for each letter.
+#html_split_index = False
+
+# If true, links to the reST sources are added to the pages.
+#html_show_sourcelink = True
+
+# If true, "Created using Sphinx" is shown in the HTML footer. Default is True.
+#html_show_sphinx = True
+
+# If true, "(C) Copyright ..." is shown in the HTML footer. Default is True.
+#html_show_copyright = True
+
+# If true, an OpenSearch description file will be output, and all pages will
+# contain a <link> tag referring to it.  The value of this option must be the
+# base URL from which the finished HTML is served.
+#html_use_opensearch = ''
+
+# This is the file name suffix for HTML files (e.g. ".xhtml").
+#html_file_suffix = None
+
+# Output file base name for HTML help builder.
+htmlhelp_basename = 'orangekitearthdoc'
+
+
+# -- Options for LaTeX output --------------------------------------------------
+
+latex_elements = {
+# The paper size ('letterpaper' or 'a4paper').
+#'papersize': 'letterpaper',
+
+# The font size ('10pt', '11pt' or '12pt').
+#'pointsize': '10pt',
+
+# Additional stuff for the LaTeX preamble.
+#'preamble': '',
+}
+
+# Grouping the document tree into LaTeX files. List of tuples
+# (source start file, target name, title, author, documentclass [howto/manual]).
+latex_documents = [
+  ('index', 'orangekitearth.tex', u'orangekit.earth Documentation',
+   u'Bioinformatics Laboratory, FRI UL', 'manual'),
+]
+
+# The name of an image file (relative to this directory) to place at the top of
+# the title page.
+#latex_logo = None
+
+# For "manual" documents, if this is true, then toplevel headings are parts,
+# not chapters.
+#latex_use_parts = False
+
+# If true, show page references after internal links.
+#latex_show_pagerefs = False
+
+# If true, show URL addresses after external links.
+#latex_show_urls = False
+
+# Documents to append as an appendix to all manuals.
+#latex_appendices = []
+
+# If false, no module index is generated.
+#latex_domain_indices = True
+
+
+# -- Options for manual page output --------------------------------------------
+
+# One entry per manual page. List of tuples
+# (source start file, name, description, authors, manual section).
+man_pages = [
+    ('index', 'orangekitearth', u'orangekit.earth Documentation',
+     [u'Bioinformatics Laboratory, FRI UL'], 1)
+]
+
+# If true, show URL addresses after external links.
+#man_show_urls = False
+
+
+# -- Options for Texinfo output ------------------------------------------------
+
+# Grouping the document tree into Texinfo files. List of tuples
+# (source start file, target name, title, author,
+#  dir menu entry, description, category)
+texinfo_documents = [
+  ('index', 'orangekitearth', u'orangekit.earth Documentation',
+   u'Bioinformatics Laboratory, FRI UL', 'orangekitearth',
+   'A Python interface for the earth package by Stephen Milborrow.',
+   'Miscellaneous'),
+]
+
+# Documents to append as an appendix to all manuals.
+#texinfo_appendices = []
+
+# If false, no module index is generated.
+#texinfo_domain_indices = True
+
+# How to display URL addresses: 'footnote', 'no', or 'inline'.
+#texinfo_show_urls = 'footnote'
+
+# If true, do not generate a @detailmenu in the "Top" node's menu.
+#texinfo_no_detailmenu = False
+
+
+# -- Options for Epub output ---------------------------------------------------
+
+# Bibliographic Dublin Core info.
+epub_title = u'orangekit.earth'
+epub_author = u'Bioinformatics Laboratory, FRI UL'
+epub_publisher = u'Bioinformatics Laboratory, FRI UL'
+epub_copyright = u'2013, Bioinformatics Laboratory, FRI UL'
+
+# The language of the text. It defaults to the language option
+# or en if the language is not set.
+#epub_language = ''
+
+# The scheme of the identifier. Typical schemes are ISBN or URL.
+#epub_scheme = ''
+
+# The unique identifier of the text. This can be a ISBN number
+# or the project homepage.
+#epub_identifier = ''
+
+# A unique identification for the text.
+#epub_uid = ''
+
+# A tuple containing the cover image and cover page html template filenames.
+#epub_cover = ()
+
+# A sequence of (type, uri, title) tuples for the guide element of content.opf.
+#epub_guide = ()
+
+# HTML files that should be inserted before the pages created by sphinx.
+# The format is a list of tuples containing the path and title.
+#epub_pre_files = []
+
+# HTML files shat should be inserted after the pages created by sphinx.
+# The format is a list of tuples containing the path and title.
+#epub_post_files = []
+
+# A list of files that should not be packed into the epub file.
+#epub_exclude_files = []
+
+# The depth of the table of contents in toc.ncx.
+#epub_tocdepth = 3
+
+# Allow duplicate toc entries.
+#epub_tocdup = True
+
+# Fix unsupported image types using the PIL.
+#epub_fix_images = False
+
+# Scale large images.
+#epub_max_image_width = 0
+
+# If 'no', URL addresses will not be shown.
+#epub_show_urls = 'inline'
+
+# If false, no index is generated.
+#epub_use_index = True
+
+
+# Example configuration for intersphinx: refer to the Python standard library.
+intersphinx_mapping = {
+    'python': ('http://docs.python.org/2/', None),
+    'Orange': ('http://orange.biolab.si/docs/latest/',
+               'http://orange.biolab.si/docs/latest/_objects')
+}
+
+
+numpydoc_show_class_members = False

File docs/source/images/Earth-Schema.png

Added
New image

File docs/source/images/Earth.png

Added
New image

File docs/source/images/earth-evimp.png

Added
New image

File docs/source/index.rst

+.. orangekit.earth documentation master file, created by
+   sphinx-quickstart on Mon Aug 26 11:49:18 2013.
+   You can adapt this file completely to your liking, but it should at least
+   contain the root `toctree` directive.
+
+Welcome to orangekit.earth's documentation!
+===========================================
+
+Contents:
+
+.. toctree::
+   :maxdepth: 2
+
+   overview
+
+   orangekit.earth
+
+
+Widgets
+-------
+
+.. toctree::
+   :maxdepth: 1
+
+   Earth <orangekit.earth.widgets.earth>
+
+
+Indices and tables
+==================
+
+* :ref:`genindex`
+* :ref:`modindex`
+* :ref:`search`
+

File docs/source/orangekit.earth.rst

+====================================
+:mod:`orangekit.earth` API reference
+====================================
+
+.. module:: orangekit.earth
+
+Learner/Classifier
+------------------
+
+The :class:`EarthLearner` and :class:`EarthClassifier` provide the
+standard Orange learner/classifier pair for model induction/prediction.
+
+.. autoclass:: EarthLearner
+   :show-inheritance:
+   :members:
+   :special-members: __call__
+
+
+.. autoclass:: EarthClassifier
+   :show-inheritance:
+   :members:
+   :special-members: __call__
+
+
+.. seealso:: :mod:`Orange.classification`
+
+
+Example::
+
+    >>> import Orange, orangekit.earth
+    >>> data = Orange.data.Table("housing")
+    >>> c = orangekit.earth.EarthLearner(data, degree=2, terms=10)
+    >>> print c
+    MEDV =
+       23.587
+       +11.896 * max(0, RM - 6.431)
+       +1.142 * max(0, 6.431 - RM)
+       -0.612 * max(0, LSTAT - 6.120)
+       -228.795 * max(0, NOX - 0.647) * max(0, RM - 6.431)
+       +0.023 * max(0, TAX - 307.000) * max(0, 6.120 - LSTAT)
+       +0.029 * max(0, 307.000 - TAX) * max(0, 6.120 - LSTAT)
+
+
+Feature scoring
+---------------
+
+.. autoclass:: ScoreEarthImportance
+   :show-inheritance:
+   :members:
+   :special-members: __call__
+
+
+.. seealso:: :mod:`Orange.feature.scoring`
+
+
+Utility functions
+-----------------
+
+.. autofunction:: gcv
+
+.. autofunction:: plot_evimp
+
+.. autofunction:: bagged_evimp

File docs/source/orangekit.earth.widgets.earth.rst

+.. _Earth:
+
+Earth Learner
+=============
+
+.. image:: ../../orangekit/earth/widgets/icons/EarthMars.svg
+   :alt: Earth Learner
+
+
+Channels
+--------
+
+Inputs:
+   - Data (Table)
+
+Outputs:
+   - Learner
+         The Earth learning algorithm with parameters as specified in the
+         dialog.
+
+   - Predictor
+        Trained regressor
+
+   - Basis Matrix (Table)
+        A data table of induced basis terms.
+
+Signal ``Predictor`` sends the regressor only if signal ``Data`` is present.
+
+Description
+-----------
+
+This widget constructs a Earth learning algorithm (an implementation of
+the `MARS - Multivariate Adaptive Regression Splines`_). As all widgets
+for classification and regression, this widget provides a learner and
+classifier/regressor on the output. Learner is a learning algorithm with
+settings as specified by the user. It can be fed into widgets for testing
+learners, for instance Test Learners.
+
+.. _`MARS - Multivariate Adaptive Regression Splines`: http://en.wikipedia.org/wiki/Multivariate_adaptive_regression_splines
+
+.. image:: images/Earth.png
+
+
+.. rst-class:: stamp-list
+
+   1. Learner/Predictor can be given a name under which it will appear
+      in other widgets (say ``Test Learners`` or ``Predictions``).
+
+   2. The ``Max. term degree`` parameter specifies the degree of the
+      terms induced in the forward pass. For instance, if set to ``1``
+      the resulting model will contain only linear terms.
+
+   3. The ``Max. terms`` specifies how many terms can be induces in the
+      forward pass. A special value ``Automatic`` instructs the learner
+      to set the limit automatically based on the dimensionality of the
+      data (``min(200, max(20, 2 * NumberOfAttributes)) + 1``)
+
+   4. The ``Knot penalty`` is used in the pruning pass (hinge function
+      penalty for the GCV calculation)
+
+
+After changing one or more settings, you need to push 5 ``Apply``,
+which will put the new learner on the output and, if the training
+examples are given, construct a new predictor and output it as well.
+
+
+Examples
+--------
+
+Lets use the learner to train a model on a data subset and test it on
+unseen instances.
+
+.. image:: images/Earth-Schema.png

File docs/source/overview.rst

+========
+Overview
+========
+
+
+:mod:`orangekit.earth` provides a an implementation of
+`Multivariate adaptive regression splines (MARS)`_ for the `Orange`_
+machine learning library. This implementation is based on the C code from
+`R package earth`_ by Stephen Milborrow.
+
+
+.. _`Multivariate adaptive regression splines (MARS)`: http://en.wikipedia.org/wiki/Multivariate_adaptive_regression_splines
+
+.. _`R package earth`: http://cran.r-project.org/web/packages/earth/index.html
+
+.. _`Orange`: http://orange.biolab.si
+
+
+Requirements
+------------
+
+In order to use orangekit.earth you need to have already installed
+`Orange` (version 2.7 or latest). If you are installing from source
+you will also need the a working C compiler tool-chain.
+
+
+Building from source
+--------------------
+
+In order to build orangekit.earth from source you will need a working
+C compiler tool-chain.
+
+* On Windows install the free `Microsoft Visual C++ 2008 Express
+  <http://www.microsoft.com/express>`_ (`direct download link
+  <http://go.microsoft.com/fwlink/?linkid=244366>`_)
+
+* On Linux use you distribution's package management tools to install gcc
+
+* On Mac OSX install the `XCode developer tools
+  <http://developer.apple.com/xcode>`_
+
+
+Installing
+----------
+
+You can install it using pip or easy_install::
+
+   pip install orangekit.earth
+
+or::
+
+   easy_install orangekit.earth
+

File orangekit/earth/evimp.py

 
 def plot_evimp(evimp):
     """
-    Plot the variable importances as returned from `evimp`.
+    Plot the variable importances as returned from
+    :func:`EarthClassifier.evimp`.
 
     ::
 
-        import Orange
+        import Orange, orangekit.earth
         data = Orange.data.Table("housing")
         c = orangekit.earth.EarthLearner(data, degree=3)
         orangekit.earth.plot_evimp(c.evimp())
 
-    .. image:: files/earth-evimp.png
+    .. image:: images/earth-evimp.png
 
     The left axis is the nsubsets measure and on the right are the normalized
     RSS and GCV.