U-Boot 1.1.4 (Mar  1 2010 - 13:40:52)

U-Boot code: F0500000 -> F051D800  BSS: -> F0522668
RAM Configuration:
Bank #0: f0000000 64 MB
nor init:
## Unknown FLASH on Bank 1 - Size = 0x00000000 = 0 MB
Flash:  0 kB
nand init:
FLASH INFORMATION:
ID: ECDC1095  TYPE: K9F4G08XXX SIZE: 512M
Checking env...
In:    serial
Out:   serial
Err:   serial
Normal boot UMTS module
HW Ver : 1
LCD : InnoLux New
Decode LOGO(JPG format) OK
Boot version: V1R1C01B04g_8.0
Booting from k1 (The last booting succeeded)
Saving    env backup...done
Checking  env backup...OK
Saving    env...       done
Checking  env...       OK
Hit key 'D/d' to stop autoboot:  0
bootm in nand !
## Booting image at f0008000 ...
   Image Name:   /home/dingli/hw001s/MMC255u_V100
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1076988 Bytes =  1 MB
   Load Address: f0800000
   Entry Point:  f0800000
OK

Starting kernel ...

Uncompressing Linux...................................................................... done, booting the kernel.
Linux version 2.6.14-hi3560v100-pilot-test-pa-release (root@dpf.china.huawei.com) (gcc version 3.4.3 (release) (CodeSourcery ARM Q3cvs 2004)) #1 Mon Mar 1 13:43:43 CST 2010
CPU: ARM926EJ-Sid(wb) [41069265] revision 5 (ARMv5TEJ)
Machine: Hi3560v100
Memory policy: ECC disabled, Data cache writeback
CPU0: D VIVT write-back cache
CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
Built 1 zonelists
Kernel command line: mem=23M console=ttyAMA0,115200 root=1f06 rootfstype=yaffs2 nand_mtdparts=phys_mapped_flash.0:1M(Boot)ro,512k(UEnv),512k(UEnvbk),1M(Cfg),2M(Logo),2M@0x00500000(Kernel1)ro,32M(Rootfs1)ro,2M(Kernel2),32M(Rootfs2),55M(Usrdata),-(Pic) panic=3
PID hash table entries: 128 (order: 7, 2048 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 23MB = 23MB total
Memory: 21036KB available (1787K code, 358K data, 88K init)
Mount-cache hash table entries: 512
HI_VERSION=LINUX_2_6_14-M05C0404B0203 @Hi3560v100_OSDrv_1_0_0_2 2009-01-21 15:24:58
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
Hisilicon clock system V0.01
NetWinder Floating Point Emulator V0.97 (double precision)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
yaffs Mar  1 2010 13:42:04 Installing.
Initializing Cryptographic API
Serial: AMBA PL011 UART driver
ttyAMA0 at MMIO 0x101f1000 (irq = 12) is a AMBA/PL011
ttyAMA1 at MMIO 0x101f2000 (irq = 13) is a AMBA/PL011
io scheduler noop registered
RAMDISK driver initialized: 4 RAM disks of 8192K size 1024 blocksize
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
NET: Registered protocol family 24
SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
CSLIP: code copyright 1989 Regents of the University of California.
SLIP linefill/keepalive option.
physmap flash device: 1000000 at 34000000
NULL
here1!
Creating 11 MTD partitions on "NAND 512MiB 3,3V 8-bit":
0x00000000-0x00100000 : "Boot"
0x00100000-0x00180000 : "UEnv"
0x00180000-0x00200000 : "UEnvbk"
0x00200000-0x00300000 : "Cfg"
0x00300000-0x00500000 : "Logo"
0x00500000-0x00700000 : "Kernel1"
0x00700000-0x02700000 : "Rootfs1"
0x02700000-0x02900000 : "Kernel2"
0x02900000-0x04900000 : "Rootfs2"
0x04900000-0x08000000 : "Usrdata"
0x08000000-0x20000000 : "Pic"
NET: Registered protocol family 2
IP route cache hash table entries: 256 (order: -2, 1024 bytes)
TCP established hash table entries: 1024 (order: 0, 4096 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP reno registered
IPv4 over IPv4 tunneling driver
TCP bic registered
NET: Registered protocol family 17
NET: Registered protocol family 15
yaffs: dev is 32505862 name is "mtdblock6"
yaffs: passed flags ""
yaffs: Attempting MTD mount on 31.6, "mtdblock6"
VFS: Mounted root (yaffs2 filesystem) readonly.
Freeing init memory: 88K
init started:  BusyBox v1.1.2 (2010.03.01-05:45+0000) multi-call binary

            _ _ _ _ _ _ _ _ _ _ _ _
            \  _  _   _  _ _ ___
            / /__/ \ |_/
           / __   /  -  _ ___
          / /  / /  / /
  _ _ _ _/ /  /  \_/  \_ ______
___________\___\__________________

[RCS]: /etc/init.d/S00devs
[RCS]: /etc/init.d/S80network
yaffs: dev is 32505865 name is "mtdblock9"
yaffs: passed flags ""
yaffs: Attempting MTD mount on 31.9, "mtdblock9"
Auto login as root ...
Jan  1 00:00:03 login[181]: root login  on `<NULL>0'



BusyBox v1.1.2 (2010.03.01-05:45+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.

Welcome to EchoLife.
chmod: ./rc.appinit: Read-only file system
Hisilicon Media Memory Zone Manager
NET: Registered protocol family 1
loop: loaded (max 8 devices)
Get address=0x1015004c, new value=0x8!



Press 'A' to abort loading modules in 1 seconds...HISI_DMAC-MDC040003 @Hi3560v100_OSDrv_1_0_0_2 2008-09-02 15:39:07
HISI_I2C-MDC040002 @Hi3560v100_OSDrv_1_0_0_2 2008-09-02 15:39:33
Installing keyboard...
Release: Mar  1 2010 -- 13:43:58
Sense frequency is set in 50kHz
Adapt keyboard hardware version 1
Turn on LED
RTC Installed
HISI_SDIO-M05C0402 @Hi3560v100_OSDrv_1_0_0_2 2008-09-02 15:39:27
Card stack initializing...
HISI_SDIO-M05C0402 @Hi3560v100_OSDrv_1_0_0_2 2008-09-02 15:39:27
SD2.0 card detected
Card found in slot 0
Card inserted
Version: Mar  1 2010 13:43:58
Initiating drvbox...
Card stack checking...
SD2.0 card detected
SCSI subsystem initialized
Card found in slot 0
Card stack checking succeeded
rmmod: g_file_storage: No such file or directory
rmmod: hiusb-udc: No such file or directory
Card Writeable
card->state = 104
mmcblk0: mmc0:59b4 SD    15071MB
 /dev/mmc/blk0: p1 p2
Card registered
usbcore: registered new driver usbfs
usbcore: registered new driver hub
hiusb-hcd hiusb-hcd.0: Hisilicon USB host controller
hiusb-hcd hiusb-hcd.0: new USB bus registered, assigned bus number 1
hiusb-hcd hiusb-hcd.0: irq 23, io base 0x80090000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usb 1-1: new full speed USB device using hiusb-hcd and address 2
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
rmmod: hifb: No such file or directory
rmmod: fb: No such file or directory
rmmod: hi3560: No such file or directory
rmmod: tde: No such file or directory
rmmod: hidmac: Resource temporarily unavailable
tde: module license 'Copyright(c)' taints kernel.
TDE_MAIN_VERSION[v1.0.0.1] Build Time[Jan 21 2009, 15:50:21]
TDE_ADP_VERSION[hi3560 adp v1.0.0.3] Build Time[Jan 21 2009, 15:50:21]
DRV356X_init
Hisilicon UMAP device driver interface: v1.00
The Vou Clk Freq is 270
DRV356X_init ok
hifb info: HIFB_MAIN_VERSION[HIFB_MAIN_VERSION] Build Time[Jan 21 2009, 15:50:22]
hifb info: video:vram0_size:3364000,vram1_size:1658880
hifb info: succeed in registering the fb0: ovl0 frame buffer device
hifb info: succeed in registering the fb1: ovl1 frame buffer device
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
usbserial_generic 1-1:1.0: Generic converter detected
usb 1-1: Generic converter now attached to ttyUSB0
usbserial_generic 1-1:1.1: Generic converter detected
usb 1-1: Generic converter now attached to ttyUSB1
usbserial_generic 1-1:1.2: Generic converter detected
usb 1-1: Generic converter now attached to ttyUSB2
usbcore: registered new driver usbserial_generic
drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
umount: Couldn't umount /home/pic: Invalid argument
yaffs: dev is 32505866 name is "mtdblock:"
yaffs: passed flags ""
yaffs: Attempting MTD mount on 31.10, "mtdblock:"
yaffs: restored from checkpoint



Press 'B' to abort starting apps in 1 seconds...
Starting apps...



[CLI_InitTelnetSwitch:337]Init telnet switch

<MiniGUI is compiled in Mar  1 2010---13:44:23>
GAL_CreateVideoDevice 1!
Saving boot environment parameters...


GAL_CreateVideoDevice 2 !
GAL_CreateVideoDevice 3!
you are using console frame buffer video driver!
Printing original vinfo:
Printing vinfo:
txres: 720
tyres: 576
txres_virtual: 720
tyres_virtual: 576
txoffset: 0
tyoffset: 0
tbits_per_pixel: 16
tgrayscale: 0
tnonstd: 0
tactivate: 0
theight: 0
twidth: 0
taccel_flags: 0
tpixclock: -1
tleft_margin: -1
tright_margin: -1
tupper_margin: -1
tlower_margin: -1
thsync_len: -1
tvsync_len: -1
tsync: 0
tvmode: 0
tred: 5/10
tgreen: 5/5
tblue: 5/0
talpha: 1/15

Printing wanted vinfo:
Printing vinfo:
txres: 800
tyres: 480
txres_virtual: 800
tyres_virtual: 480
txoffset: 0
tyoffset: 0
tbits_per_pixel: 16
tgrayscale: 0
tnonstd: 0
tactivate: 0
theight: 0
twidth: 0
taccel_flags: 0
tpixclock: -1
tleft_margin: -1
tright_margin: -1
tupper_margin: -1
tlower_margin: -1
thsync_len: -1
tvsync_len: -1
tsync: 0
tvmode: 0
tred: 5/10
tgreen: 5/5
tblue: 5/0
talpha: 1/15

Printing actual finfo:
Printing finfo:
tsmem_start = 0xf1a36000
tsmem_len = 1658880
ttype = 0
ttype_aux = 0
tvisual = 2
txpanstep = 1
typanstep = 1
tywrapstep = 0
tline_length = 1600
tmmio_start = (nil)
tmmio_len = 0
taccel = 0

Printing actual vinfo:
Printing vinfo:
txres: 800
tyres: 480
txres_virtual: 800
tyres_virtual: 480
txoffset: 0
tyoffset: 0
tbits_per_pixel: 16
tgrayscale: 0
tnonstd: 0
tactivate: 0
theight: 0
twidth: 0
taccel_flags: 0
tpixclock: -1
tleft_margin: -1
tright_margin: -1
tupper_margin: -1
tlower_margin: -1
thsync_len: -1
tvsync_len: -1
tsync: 0
tvmode: 0
tred: 5/10
tgreen: 5/5
tblue: 5/0
talpha: 1/15

ServerStartup 1
ServerStartup 2
ServerStartup 3 [10]
Welcome Visiting Huawei MMC255
Copyright by Huawei Technologies Co., Ltd.
Login:GAL_CreateVideoDevice 1!
Saving boot environment parameters...
/home/dingli/hw001s/MMC255u_V100R001C01/apps/hwsrc/drvapi/lib/dpfdrvubenv.c:910 Error: GetEnv umtsfb


GAL_CreateVideoDevice 2 !
GAL_CreateVideoDevicehifb info: The layer is show(0) now!
 3!
you are using console frame buffer video driver!
Printing original vinfo:
Printing vinfo:
txres: 800
tyres: 480
txres_virtual: 800
tyres_virtual: 480
txoffset: 0
tyoffset: 0
tbits_per_pixel: 16
tgrayscale: 0
tnonstd: 0
tactivate: 0
theight: 0
twidth: 0
taccel_flags: 0
tpixclock: -1
tleft_margin: -1
tright_margin: -1
tupper_margin: -1
tlower_margin: -1
thsync_len: -1
tvsync_len: -1
tsync: 0
tvmode: 0
tred: 5/10
tgreen: 5/5
tblue: 5/0
talpha: 1/15

Printing actual finfo:
Printing finfo:
tsmem_start = 0xf1a36000
tsmem_len = 1658880
ttype = 0
ttype_aux = 0
tvisual = 2
txpanstep = 1
typanstep = 1
tywrapstep = 0
tline_length = 1600
tmmio_start = (nil)
tmmio_len = 0
taccel = 0

Printing actual vinfo:
Printing vinfo:
txres: 800
tyres: 480
txres_virtual: 800
tyres_virtual: 480
txoffset: 0
tyoffset: 0
tbits_per_pixel: 16
tgrayscale: 0
tnonstd: 0
tactivate: 0
theight: 0
twidth: 0
taccel_flags: 0
tpixclock: -1
tleft_margin: -1
tright_margin: -1
tupper_margin: -1
tlower_margin: -1
thsync_len: -1
tvsync_len: -1
tsync: 0
tvmode: 0
tred: 5/10
tgreen: 5/5
tblue: 5/0
talpha: 1/15

Err: Time Format
Err: Get Check

###################################################
sleep mode:0  begin time: 0:0  end time: 0:0
effect:0   order:1   is show text:0
is show hint:0   is jump:1   play speed:0   ntimeformat:0
###################################################device lTmp 0
device lTmp 1add a new ep, current_use_epnum=1

device lTmp 2
device name /dev/usb/tts/2
/home/dingli/hw001s/MMC255u_V100R001C01/apps/hwsrc/drvapi/lib/dpfdrvubenv.c:910 Error: GetEnv umtsfb
received ui DPF_E_MSG_PICPLY_MMS_DOWN_AVAIL

now ,send at begin

now ,out of GSM_CSMSmsStart, g_bSimin 0

HiGo Ver:1.0.1.2 a14
This version is building at Apr  3 2009 16:17:32

HiGo 3560 ADP Ver:1.0.1.2 a14
This version is building at Apr  3 2009 16:17:35
hifb info: The layer is show(1) now!
UI_StartFromPlyMod out

U-Boot 1.1.4 (Mar  1 2010 - 13:40:52)

U-Boot code: F0500000 -> F051D800  BSS: -> F0522668
RAM Configuration:
Bank #0: f0000000 64 MB
nor init:
## Unknown FLASH on Bank 1 - Size = 0x00000000 = 0 MB
Flash:  0 kB
nand init:
FLASH INFORMATION:
ID: ECDC1095  TYPE: K9F4G08XXX SIZE: 512M
Checking env...
In:    serial
Out:   serial
Err:   serial
Normal boot UMTS module
HW Ver : 1
LCD : InnoLux New
Decode LOGO(JPG format) OK
Boot version: V1R1C01B04g_8.0
Booting from k1 (The last booting succeeded)
Saving    env backup...done
Checking  env backup...OK
Saving    env...       done
Checking  env...       OK
Hit key 'D/d' to stop autoboot:  0
U-Boot # help
?       - alias for 'help'
base    - print or set address offset
bdinfo  - print Board Info structure
bl [duty] [period]
bootm   - boot application image from memory
cmp     - memory compare
cp      - memory copy
crc32   - checksum calculation
echo    - echo args to console
erase   - erase FLASH memory
erase_nand   - erase NAND FLASH memory
flashb       - backup parameters
flashc org/backup  - check parameters
flashd [flash_addr] [data_len(<=0x400)]    - read datas from flash
flashd_oob [flash_addr] [Page] - read oob from flash
flashr       - restore parameters
flashy <flash_addr> [mem_addr] [baud]
flashy_logo [jpg|bmp] [flash_addr] [mem_addr] [baud]
flashy_yaffs2 <flash_addr> [mem_addr] [baud]
flinfo  - print FLASH memory information
flinfo_nand  - print FLASH memory information
go      - start application at address 'addr'
help    - print online help
loadb   - load binary file over serial line (kermit mode)
loady [mem_addr] [off] [baud]
loop    - infinite loop on address range
make_bad   - make your specified block bad! just for test
make_good   - make your specified block good! just for test
md      - memory display
mm      - memory modify (auto-incrementing)
mtest   - simple RAM test
mw      - memory write (fill)
nm      - memory modify (constant address)
printenv- print environment variables
protect - enable or disable FLASH write protection
reset   - Perform RESET of the CPU
run     - run commands in an environment variable
saveenv - save environment variables to persistent storage
setenv  - set environment variables
version - print monitor version
U-Boot # exit
Unknown command 'exit' - try 'help'
U-Boot # quit
Unknown command 'quit' - try 'help'
U-Boot #