- removed issue_status
Initial boot sequence Beyonwiz logo aspect ratio wrong
When the T3 starts its boot sequence there is a low resolution Beyonwiz logo displayed on the screen until the unit resets the screen resolution to the operating resolution at which time it switches to a higher resolution logo.
The first, lower resolution logo, is stretched horizontally or compressed vertically and looks wrong. This lower resolution image should be replaced with one with a correct aspect ratio.
Reproduction steps
Switch on the T3 with a TV or screen that can quickly track the resolution switches so that you can see both the initial and subsequent boot logs. The first logo should look squashed.
Comments (6)
-
-
A file was uploaded. reference to attachment splash.bin.bmp (Correct 16:9 splash.bin boot graphic) This comment was attached:
Attached a 720x576 correct for 16:9 display Beyonwiz splash image.
Replace the beyonwiz/hdx/splash.bin with this one.
-
- removed issue_status
The issue was updated with the following change(s):
- The status has been updated, from Confirmed to Delegated.
-
- removed issue_priority
The issue was updated with the following change(s):
- The priority has been updated, from Normal to High.
-
- removed issue_status
The issue was updated with the following change(s):
- The status has been updated, from Delegated to Testing.
-
reporter - removed issue_resolution
- removed issue_percent
- removed issue_close
- removed issue_status
The logo provided by IanB looks correct.
The issue was updated with the following change(s):
- The status has been updated, from Testing to Closed.
- This issue has been closed
- This issue's progression has been updated to 100 percent completed.
- The resolution has been updated, from Not determined to Fixed.
- Log in to comment
The issue was updated with the following change(s):