Commits

fis...@4525493e-7705-40b1-a816-d608a930855b  committed 305b104

*** empty log message ***

  • Participants

Comments (0)

Files changed (28)

File GNUmakefile.in

+# $Id: GNUmakefile.in,v 1.1 1998-05-11 16:47:05 fisher Exp $ -*- makefile -*-
+
+TARGET_DOC = doc:codecheck
+BINFILES   = cck-metrics
+DEFS = @DEFS@
+
+# Set enddir to big or little according to endian status
+big := $(filter -DWORDS_BIGENDIAN%, $(DEFS))
+ifdef big
+  ifneq (, $(filter %=0, $(big)))
+    enddir := little
+  else
+    enddir := big
+  endif
+else
+  enddir := little
+endif
+
+# List of .cco files to maintain with cck-compile
+ccos := $(addprefix src/$(enddir)/, $(addsuffix .cco, $(basename $(notdir $(wildcard src/*.cc)))))
+
+include $(SRT_HOME)/standard.mk
+
+cck-compile: $(ccos)
+
+src/$(enddir)/%.cco: src/%.cc
+	@echo cck-compile $(basename $(@F))
+	@cd src; \
+	cck -r$(basename $(@F)); \
+	mv $(basename $(@F)).cco $(enddir)
+
+install-local:
+	@$(SRT_HOME)/bin/mkinstalldirs $(libdir)/codecheck
+	@for f in $(notdir $(wildcard $(srcdir)/src/$(enddir)/*.cco)); do\
+	  echo cp -f $(srcdir)/src/$(enddir)/$$f $(libdir)/codecheck/$$f;\
+	  cp -f $(srcdir)/src/$(enddir)/$$f $(libdir)/codecheck/$$f;	\
+	done
+	@$(SRT_HOME)/bin/mkinstalldirs $(bindir)
+	@for f in $(BINFILES); do			\
+	  echo cp -f $(srcdir)/src/$$f $(bindir)/$$f;	\
+	  cp -f $(srcdir)/src/$$f $(bindir)/$$f;	\
+	done
+
+distclean-local:; -rm -f config.site GNUmakefile
+# empty
+#! /bin/sh
+
+# From configure.in Id: package-configure.in,v 1.2 1997/09/20 13:23:57 lat Exp 
+
+
+
+
+
+
+# Guess values for system-dependent variables and create Makefiles.
+# Generated automatically using autoconf version 2.10 
+# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+
+# Defaults:
+ac_help=
+ac_default_prefix=/usr/local
+# Any additions from configure.in:
+ac_help="$ac_help
+   --with-srt-data=FILE           Use FILE to store SRT configuration data."
+ac_help="$ac_help
+   --with-option-sets=SETS        Use compiler options of SETS types,
+				  for instance \`debug', \`optimise' etc. 
+				  Several option sets may be specified
+				  by separating them with blanks.  If
+                                  not specified, \`default' is used."
+ac_help="$ac_help
+   --disable-mount-translations   Do not perform mount translations;
+                                    applicable only on cygwin32."
+
+# Initialize some variables set by options.
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+build=NONE
+cache_file=./config.cache
+exec_prefix=NONE
+host=NONE
+no_create=
+nonopt=NONE
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+target=NONE
+verbose=
+x_includes=NONE
+x_libraries=NONE
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datadir='${prefix}/share'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+libdir='${exec_prefix}/lib'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+infodir='${prefix}/info'
+mandir='${prefix}/man'
+
+# Initialize some other variables.
+subdirs=
+MFLAGS= MAKEFLAGS=
+
+ac_prev=
+for ac_option
+do
+
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval "$ac_prev=\$ac_option"
+    ac_prev=
+    continue
+  fi
+
+  case "$ac_option" in
+  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
+  *) ac_optarg= ;;
+  esac
+
+  # Accept the important Cygnus configure options, so we can diagnose typos.
+
+  case "$ac_option" in
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir="$ac_optarg" ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build="$ac_optarg" ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file="$ac_optarg" ;;
+
+  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
+  | --da=*)
+    datadir="$ac_optarg" ;;
+
+  -disable-* | --disable-*)
+    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
+      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+    fi
+    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+    eval "enable_${ac_feature}=no" ;;
+
+  -enable-* | --enable-*)
+    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
+      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+    fi
+    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+    case "$ac_option" in
+      *=*) ;;
+      *) ac_optarg=yes ;;
+    esac
+    eval "enable_${ac_feature}='$ac_optarg'" ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix="$ac_optarg" ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he)
+    # Omit some internal or obsolete options to make the list less imposing.
+    # This message is too long to be a string in the A/UX 3.1 sh.
+    cat << EOF
+Usage: configure [options] [host]
+Options: [defaults in brackets after descriptions]
+Configuration:
+  --cache-file=FILE       cache test results in FILE
+  --help                  print this message
+  --no-create             do not create output files
+  --quiet, --silent       do not print \`checking...' messages
+  --version               print the version of autoconf that created configure
+Directory and file names:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+                          [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                          [same as prefix]
+  --bindir=DIR            user executables in DIR [EPREFIX/bin]
+  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
+  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
+  --datadir=DIR           read-only architecture-independent data in DIR
+                          [PREFIX/share]
+  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
+                          [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
+  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
+  --includedir=DIR        C header files in DIR [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
+  --infodir=DIR           info documentation in DIR [PREFIX/info]
+  --mandir=DIR            man documentation in DIR [PREFIX/man]
+  --srcdir=DIR            find the sources in DIR [configure dir or ..]
+  --program-prefix=PREFIX prepend PREFIX to installed program names
+  --program-suffix=SUFFIX append SUFFIX to installed program names
+  --program-transform-name=PROGRAM
+                          run sed PROGRAM on installed program names
+EOF
+    cat << EOF
+Host type:
+  --build=BUILD           configure for building on BUILD [BUILD=HOST]
+  --host=HOST             configure for HOST [guessed]
+  --target=TARGET         configure for TARGET [TARGET=HOST]
+Features and packages:
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+  --x-includes=DIR        X include files are in DIR
+  --x-libraries=DIR       X library files are in DIR
+EOF
+    if test -n "$ac_help"; then
+      echo "--enable and --with options recognized:$ac_help"
+    fi
+    exit 0 ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host="$ac_optarg" ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir="$ac_optarg" ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir="$ac_optarg" ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir="$ac_optarg" ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir="$ac_optarg" ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst \
+  | --locals | --local | --loca | --loc | --lo)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
+  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
+    localstatedir="$ac_optarg" ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir="$ac_optarg" ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir="$ac_optarg" ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix="$ac_optarg" ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix="$ac_optarg" ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix="$ac_optarg" ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name="$ac_optarg" ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir="$ac_optarg" ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir="$ac_optarg" ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site="$ac_optarg" ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir="$ac_optarg" ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir="$ac_optarg" ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target="$ac_optarg" ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers)
+    echo "configure generated by autoconf version 2.10"
+    exit 0 ;;
+
+  -with-* | --with-*)
+    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
+      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+    fi
+    ac_package=`echo $ac_package| sed 's/-/_/g'`
+    case "$ac_option" in
+      *=*) ;;
+      *) ac_optarg=yes ;;
+    esac
+    eval "with_${ac_package}='$ac_optarg'" ;;
+
+  -without-* | --without-*)
+    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
+      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+    fi
+    ac_package=`echo $ac_package| sed 's/-/_/g'`
+    eval "with_${ac_package}=no" ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes="$ac_optarg" ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries="$ac_optarg" ;;
+
+  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
+    ;;
+
+  *)
+    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
+      echo "configure: warning: $ac_option: invalid host type" 1>&2
+    fi
+    if test "x$nonopt" != xNONE; then
+      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
+    fi
+    nonopt="$ac_option"
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
+fi
+
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+
+# File descriptor usage:
+# 0 standard input
+# 1 file creation
+# 2 errors and warnings
+# 3 some systems may open it to /dev/tty
+# 4 used on the Kubota Titan
+# 6 checking for... messages and results
+# 5 compiler messages saved in config.log
+if test "$silent" = yes; then
+  exec 6>/dev/null
+else
+  exec 6>&1
+fi
+exec 5>./config.log
+
+echo "\
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+" 1>&5
+
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Also quote any args containing shell metacharacters.
+ac_configure_args=
+for ac_arg
+do
+  case "$ac_arg" in
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c) ;;
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
+  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
+  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
+  esac
+done
+
+# NLS nuisances.
+# Only set LANG and LC_ALL to C if already set.
+# These must not be set unconditionally because not all systems understand
+# e.g. LANG=C (notably SCO).
+if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
+if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -rf conftest* confdefs.h
+# AIX cpp loses on an empty file, so make sure it contains at least a newline.
+echo > confdefs.h
+
+# A filename unique to this package, relative to the directory that
+# configure is in, which we can look for to find out if srcdir is correct.
+ac_unique_file=PACKAGE
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then its parent.
+  ac_prog=$0
+  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
+  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
+  srcdir=$ac_confdir
+  if test ! -r $srcdir/$ac_unique_file; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r $srcdir/$ac_unique_file; then
+  if test "$ac_srcdir_defaulted" = yes; then
+    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
+  else
+    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
+  fi
+fi
+srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
+
+# Prefer explicitly selected file to automatically selected ones.
+if test -z "$CONFIG_SITE"; then
+  if test "x$prefix" != xNONE; then
+    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+  else
+    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+  fi
+fi
+for ac_site_file in $CONFIG_SITE; do
+  if test -r "$ac_site_file"; then
+    echo "loading site script $ac_site_file"
+    . "$ac_site_file"
+  fi
+done
+
+if test -r "$cache_file"; then
+  echo "loading cache $cache_file"
+  . $cache_file
+else
+  echo "creating cache $cache_file"
+  > $cache_file
+fi
+
+ac_ext=${srt_c_ext-"c"}
+ac_out=${srt_c_out-"-o "}
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} ${ac_out}conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+
+if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
+  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
+  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
+    ac_n= ac_c='
+' ac_t='	'
+  else
+    ac_n=-n ac_c= ac_t=
+  fi
+else
+  ac_n= ac_c='\c' ac_t=
+fi
+
+
+
+
+ac_aux_dir=
+for ac_dir in $SRT_HOME/bin $srcdir/$SRT_HOME/bin; do
+  if test -f $ac_dir/install-sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f $ac_dir/install.sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  fi
+done
+if test -z "$ac_aux_dir"; then
+  { echo "configure: error: can not find install-sh or install.sh in $SRT_HOME/bin $srcdir/$SRT_HOME/bin" 1>&2; exit 1; }
+fi
+ac_config_guess=$ac_aux_dir/config.guess
+ac_config_sub=$ac_aux_dir/config.sub
+ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
+
+
+
+
+# Check whether --with-srt-data or --without-srt-data was given.
+if test "${with_srt_data+set}" = set; then
+  withval="$with_srt_data"
+  case "${withval}" in
+     yes | no )
+       { echo "configure: error: --with-srt-data requires an argument" 1>&2; exit 1; } ;;
+     * )
+       srt_data="${withval}" ;;
+   esac
+else
+  test -n "$srt_cv_data" || srt_cv_data="`pwd`/config.srt"
+   ac_configure_args="$ac_configure_args '--with-srt-data=$srt_cv_data'"
+   srt_data="$srt_cv_data"
+fi
+
+
+if test ! -f "$srt_data"; then
+  
+echo $ac_n "checking for build type""... $ac_c" 1>&6
+if test -z "$srt_build_type"; then
+  case "$srcdir" in
+    /*) srt_build_type=cwd;;
+    .)  srt_build_type=srcdir;;
+    ../../..)
+        case "`pwd`" in
+          */.srt/*/*) srt_build_type=srt;;
+          *)          srt_build_type=cwd;;
+        esac;;
+    *)  srt_build_type=cwd;;
+  esac
+fi
+echo "$ac_t""$srt_build_type" 1>&6
+
+echo $ac_n "checking for build tree root""... $ac_c" 1>&6
+if test -z "$srt_build_root"; then
+  case "$srt_build_type" in
+    srt | srcdir) srt_build_root="`cd $srcdir; pwd`" ;;
+    cwd)          srt_build_root="`pwd`" ;;
+  esac
+fi
+echo "$ac_t""$srt_build_root" 1>&6
+
+  echo creating variable cache $srt_data
+  echo $ac_n "checking for \$prefix""... $ac_c" 1>&6
+  if test "x$prefix" = xNONE; then
+    prefix="$srt_build_root/installed"
+  fi
+  echo "$ac_t""$prefix" 1>&6
+
+  cat > conftest.vars <<EOF
+    test "x\$prefix" = xNONE &&
+      prefix="$prefix"
+    test "x\$exec_prefix" = xNONE &&
+      exec_prefix='\${prefix}/\${SRT_TARGET}'
+    test "x\${docdir-NONE}" = xNONE &&
+      docdir='\${datadir}/doc'
+    test "x\${archincludedir-NONE}" = xNONE &&
+      archincludedir='\${exec_prefix}/include'
+    test "x\${srt_build_root-NONE}" = xNONE &&
+      srt_build_root="$srt_build_root"
+    test "x\${srt_build_type-NONE}" = xNONE &&
+      srt_build_type="$srt_build_type"
+EOF
+  mv conftest.vars "$srt_data" || exit 1
+else
+  echo loading srt data from "$srt_data"
+fi
+. "$srt_data"
+
+
+# Create a small makefile that will output the interesting variables
+rm -f conftest*
+if test -f $SRT_HOME/fragments/$SRT_TARGET/c++; then
+  cat >> conftest.make <<EOF
+include \$(SRT_HOME)/fragments/\$(SRT_TARGET)/c++
+all::
+	@echo 'CXX="\$(CXX)"'
+	@echo 'CXXCPP="\$(CXXCPP)"'
+EOF
+else
+  echo "configure: warning: could not locate C++ makefile fragments; if the settings
+                    are needed in the nested packages, things are likely to
+                    go wrong." 1>&2
+fi
+if test -f $SRT_HOME/fragments/$SRT_TARGET/c; then
+  cat >> conftest.make <<EOF
+include \$(SRT_HOME)/fragments/\$(SRT_TARGET)/c
+all::
+	@echo 'CC="\$(CC)"'
+	@echo 'CPP="\$(CPP)"'
+EOF
+else
+  echo "configure: warning: could not locate C makefile fragments; if the settings
+                    are needed in the nested packages, things are likely to
+                    go wrong." 1>&2
+fi
+if test -f $SRT_HOME/fragments/$SRT_TARGET/f77; then
+  cat >> conftest.make <<EOF
+include \$(SRT_HOME)/fragments/\$(SRT_TARGET)/f77
+all::
+	@echo 'FC="\$(FC)"'
+	@echo 'FCPP="\$(FCPP)"'
+	@echo 
+EOF
+else
+  echo "configure: warning: could not locate FORTRAN 77 makefile fragments; if the
+                    settings are needed in the nested packages, things are
+                    likely to go wrong." 1>&2
+fi
+
+for ac_prog in gmake make
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+if eval "test \"`echo '$''{'ac_cv_prog_GMAKE'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$GMAKE"; then
+  ac_cv_prog_GMAKE="$GMAKE" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  for ac_dir in $PATH; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_GMAKE="$ac_prog"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+GMAKE="$ac_cv_prog_GMAKE"
+if test -n "$GMAKE"; then
+  echo "$ac_t""$GMAKE" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+test -n "$GMAKE" && break
+done
+
+# Check that it really is GNU make
+test -n "$GMAKE" || { echo "configure: error: can not proceed without GNU make" 1>&2; exit 1; }
+if ($GMAKE --version | head -1 | grep '^GNU Make' >/dev/null 2>&1); then :
+else
+  { echo "configure: error: $GMAKE is not GNU make; cannot proceed without one" 1>&2; exit 1; }
+fi
+if $GMAKE "_SRT_HOME=$SRT_HOME" -f conftest.make all > conftest.vars; then
+  :
+else
+  echo "configure: warning: failed to determine compiler settings for nested packages.
+                    If the settings are needed in the nested packages, things
+                    are likely to go wrong." 1>&2
+fi
+. ./conftest.vars
+rm -f conftest*
+
+
+if test -z "$srt_base"; then
+  echo $ac_n "checking which base release to use""... $ac_c" 1>&6
+  if test -f $srcdir/.srt/base-release; then
+    srt_base="`cat $srcdir/.srt/base-release`"
+  fi
+
+  if test -z "$srt_base"; then
+    echo "$ac_t""indeterminate" 1>&6
+    { echo "configure: error: no \`.srt/base-release' or the file is empty" 1>&2; exit 1; }
+  else
+    echo "$ac_t""$srt_base" 1>&6
+  fi
+
+  case "$srt_base" in
+    /*) srt_base_is_relative=no ;;
+    *)  srt_base_is_relative=yes ;;
+  esac
+fi
+
+
+if test -z "$srt_root"; then
+  echo $ac_n "checking where the release root it""... $ac_c" 1>&6
+  if test -f $srcdir/.srt/root; then
+    srt_root="`cat $srcdir/.srt/root`"
+  fi
+
+  if test -z "$srt_root"; then
+    echo "$ac_t""indeterminate" 1>&6
+    { echo "configure: error: no \`.srt/root' or the file is empty" 1>&2; exit 1; }
+  else
+    echo "$ac_t""$srt_root" 1>&6
+  fi
+
+  case "$srt_root" in
+    /*) srt_root_is_relative=no ;;
+    *)  srt_root_is_relative=yes ;;
+  esac
+fi
+
+
+if test -z "$srt_base_package"; then
+  echo $ac_n "checking which base package to use""... $ac_c" 1>&6
+  if test -f "$srcdir/.srt/base-package"; then
+    srt_base_package="`cat $srcdir/.srt/base-package`"
+  fi
+
+  if test -z "$srt_base_package"; then
+    echo "$ac_t""indeterminate" 1>&6
+    { echo "configure: error: no \`.srt/base-package' or the file is empty" 1>&2; exit 1; }
+  else
+    echo "$ac_t""$srt_base_package" 1>&6
+  fi
+
+  case "$srt_base_package" in
+    /*) srt_base_package_is_relative=no ;;
+    *)  srt_base_package_is_relative=yes ;;
+  esac
+fi
+
+
+
+srt_root_incs= srt_base_incs=
+srt_root_libs= srt_base_libs= 
+
+if test x"${srt_need_release_includes-yes}" = xyes; then
+  srt_root_incs="-I\${archincludedir} -I\${includedir}"
+fi
+if test x"${srt_need_release_libraries-yes}" = xyes; then
+  srt_root_libs="-L\${libdir}"
+fi
+
+if test "$srt_base" != "$srt_root"; then
+  if test x"${srt_need_release_includes-yes}" = xyes; then
+    srt_base_incs="-I\${_base_release}/installed/\${SRT_TARGET}/include"
+    srt_base_incs="$srt_base_incs -I\${_base_release}/installed/include"
+  fi
+  if test x"${srt_need_release_libraries-yes}" = xyes; then
+    srt_base_libs="-L\${_base_release}/installed/\${SRT_TARGET}/lib"
+  fi
+fi
+
+
+# Check whether --with-option-sets or --without-option-sets was given.
+if test "${with_option_sets+set}" = set; then
+  withval="$with_option_sets"
+  case "${withval}" in
+  yes | no )
+    { echo "configure: error: --with-option-sets requires an argument" 1>&2; exit 1; } ;;
+  * )
+    OPTION_SETS="${withval}" ;;
+esac
+else
+  OPTION_SETS=default
+fi
+
+
+# Check whether --enable-mount-translations or --disable-mount-translations was given.
+if test "${enable_mount_translations+set}" = set; then
+  enableval="$enable_mount_translations"
+  :
+fi
+
+
+
+
+
+if test -z "$srt_base"; then
+  echo $ac_n "checking which base release to use""... $ac_c" 1>&6
+  if test -f $srcdir/.srt/base-release; then
+    srt_base="`cat $srcdir/.srt/base-release`"
+  fi
+
+  if test -z "$srt_base"; then
+    echo "$ac_t""indeterminate" 1>&6
+    { echo "configure: error: no \`.srt/base-release' or the file is empty" 1>&2; exit 1; }
+  else
+    echo "$ac_t""$srt_base" 1>&6
+  fi
+
+  case "$srt_base" in
+    /*) srt_base_is_relative=no ;;
+    *)  srt_base_is_relative=yes ;;
+  esac
+fi
+
+
+echo $ac_n "checking for PACKAGE""... $ac_c" 1>&6
+if test -f $srcdir/PACKAGE; then
+  echo "$ac_t""exists" 1>&6
+else
+  echo "$ac_t""not found" 1>&6
+  { echo "configure: error: Packages uses must be specified in PACKAGE.  The
+                  format of this file is described in the Software
+                  Release Tools documentation." 1>&2; exit 1; }
+fi
+
+# Compute the transitive closure of the used packages.
+srt_root_rel= srt_base_rel=
+test $srt_root_is_relative = yes && srt_root_rel="$srcdir/"
+test $srt_base_is_relative = yes && srt_base_rel="$srcdir/"
+
+echo > conftest.all
+
+sed "s/#.*//;s/		*/ /g" < "$srcdir/PACKAGE" > conftest.uses
+while read cmd package version root rest; do
+  test -n "$cmd" || continue
+
+  case "$cmd" in
+    use) ;;
+    includedir)
+	 continue;;
+    depend)
+	 continue;;
+    *)	 { echo "configure: error: unrecognised command \`$cmd' in \`"$srcdir/PACKAGE"'" 1>&2; exit 1; };;
+  esac
+
+  test -z "$package" -o -z "$version" && \
+    { echo "configure: error: badly formed \`use' command in \`"$srcdir/PACKAGE"'" 1>&2; exit 1; }
+
+  test -n "$rest" && \
+    { echo "configure: error: junk at the end of a \`use' command in \`"$srcdir/PACKAGE"'" 1>&2; exit 1; }
+
+  case "$package" in
+    */*) echo "configure: warning: used package \`$package' has a path delimiter in its name" 1>&2 ;;
+  esac
+
+  item=
+  if test -n "$root"; then
+    case "$root" in
+      /*)
+	if test -f "$root/$package/PACKAGE"; then
+	  item="dir:$root/$package"
+	else
+	  echo "configure: warning: package \`$package' not found in \`$root'" 1>&2
+	  continue
+	fi
+	;;
+
+      *)
+	r="$root"
+	while test -n "$r" && \
+	      test ! -f "$srt_root_rel$srt_root/$r/$package/PACKAGE"; do
+	  r="`echo \"$r\" | sed 's%^[^/]*%%;s%^/%%'`"
+	done
+	if test -n "$r"; then
+	  item="root:$r/$package"
+        elif test -f "$srt_base_rel$srt_base/$root/$package/PACKAGE"; then
+	  item="base:$root/$package"
+	else
+	  echo "configure: warning: package \`$package' not found in \`$root'" 1>&2
+	  continue
+	fi
+	;;
+    esac
+  else
+    r="$root"
+    while test -n "$r" -a ! -f "$srt_root_rel$srt_root/$r/$package/PACKAGE"; do
+      r="`echo \"$r\" | sed 's%^[^/]*%%;s%^/%%'`"
+    done
+    if test -n "$r"; then
+      item="root:$r/$package"
+    elif test -f "$srt_root_rel$srt_root/$package/PACKAGE"; then
+      item="root:$package"
+    elif test -f "$srt_base_rel$srt_base/$package/PACKAGE"; then
+      item="base:$package"
+    else
+      echo "configure: warning: package \`$package' not found" 1>&2
+      continue
+    fi
+  fi
+
+  if grep "^$item\$" conftest.all >/dev/null 2>&1; then :
+  else
+    echo "$item" >> conftest.all
+  fi
+done < conftest.uses
+rm -f conftest.uses
+
+
+srt_old_pkg_list=
+srt_pkg_list="`cat conftest.all`"
+until test "$srt_pkg_list" = "$srt_old_pkg_list"; do
+  srt_old_pkg_list="$srt_pkg_list"
+  echo > conftest.all
+  for srt_use in $srt_old_pkg_list; do
+    if grep "^$srt_use\$" conftest.all >/dev/null 2>&1; then continue
+    else
+      echo "$srt_use" >> conftest.all
+    fi
+
+    srt_dir=`echo "$srt_use" | sed 's/^[^:]*://'`
+    srt_type=`echo "$srt_use" | sed 's/:.*//'`
+    case $srt_type in
+      dir)  srt_pkg="$srt_dir" ;;
+      root) srt_pkg="$srt_root_rel$srt_root/$srt_dir" ;;
+      base) srt_pkg="$srt_base_rel$srt_base/$srt_dir" ;;
+    esac
+    
+sed "s/#.*//;s/		*/ /g" < "$srt_pkg/PACKAGE" > conftest.uses
+while read cmd package version root rest; do
+  test -n "$cmd" || continue
+
+  case "$cmd" in
+    use) ;;
+    includedir)
+	 continue;;
+    depend)
+	 continue;;
+    *)	 { echo "configure: error: unrecognised command \`$cmd' in \`"$srt_pkg/PACKAGE"'" 1>&2; exit 1; };;
+  esac
+
+  test -z "$package" -o -z "$version" && \
+    { echo "configure: error: badly formed \`use' command in \`"$srt_pkg/PACKAGE"'" 1>&2; exit 1; }
+
+  test -n "$rest" && \
+    { echo "configure: error: junk at the end of a \`use' command in \`"$srt_pkg/PACKAGE"'" 1>&2; exit 1; }
+
+  case "$package" in
+    */*) echo "configure: warning: used package \`$package' has a path delimiter in its name" 1>&2 ;;
+  esac
+
+  item=
+  if test -n "$root"; then
+    case "$root" in
+      /*)
+	if test -f "$root/$package/PACKAGE"; then
+	  item="dir:$root/$package"
+	else
+	  echo "configure: warning: package \`$package' not found in \`$root'" 1>&2
+	  continue
+	fi
+	;;
+
+      *)
+	r="$root"
+	while test -n "$r" && \
+	      test ! -f "$srt_root_rel$srt_root/$r/$package/PACKAGE"; do
+	  r="`echo \"$r\" | sed 's%^[^/]*%%;s%^/%%'`"
+	done
+	if test -n "$r"; then
+	  item="root:$r/$package"
+        elif test -f "$srt_base_rel$srt_base/$root/$package/PACKAGE"; then
+	  item="base:$root/$package"
+	else
+	  echo "configure: warning: package \`$package' not found in \`$root'" 1>&2
+	  continue
+	fi
+	;;
+    esac
+  else
+    r="$root"
+    while test -n "$r" -a ! -f "$srt_root_rel$srt_root/$r/$package/PACKAGE"; do
+      r="`echo \"$r\" | sed 's%^[^/]*%%;s%^/%%'`"
+    done
+    if test -n "$r"; then
+      item="root:$r/$package"
+    elif test -f "$srt_root_rel$srt_root/$package/PACKAGE"; then
+      item="root:$package"
+    elif test -f "$srt_base_rel$srt_base/$package/PACKAGE"; then
+      item="base:$package"
+    else
+      echo "configure: warning: package \`$package' not found" 1>&2
+      continue
+    fi
+  fi
+
+  if grep "^$item\$" conftest.all >/dev/null 2>&1; then :
+  else
+    echo "$item" >> conftest.all
+  fi
+done < conftest.uses
+rm -f conftest.uses
+
+  done
+  srt_pkg_list="`cat conftest.all`"
+done
+rm -f conftest.all
+
+echo $ac_n "checking transitive closure of used packages""... $ac_c" 1>&6
+if test -z "$srt_pkg_list"; then
+  echo "$ac_t""(none)" 1>&6
+else
+  echo "$ac_t""`echo $srt_pkg_list`" 1>&6
+fi
+
+# Now figure out the -I options based on the transitive closure of uses.
+srt_incs=
+srt_root_inc="\${_root}"
+srt_base_inc="\${_base_release}"
+srt_dot=".srt/\${SRT_TARGET}"
+for srt_use in $srt_pkg_list; do
+  srt_dir=`echo "$srt_use" | sed 's/^[^:]*://'`
+  srt_type=`echo "$srt_use" | sed 's/:.*//'`
+  echo $ac_n "checking if \`$srt_dir' declares an include regions""... $ac_c" 1>&6
+
+  case $srt_type in
+    dir)  srt_pkg="$srt_dir" ;;
+    root) srt_pkg="$srt_root_rel$srt_root/$srt_dir" ;;
+    base) srt_pkg="$srt_base_rel$srt_base/$srt_dir" ;;
+  esac
+
+  sed "s/#.*//;s/	/ /g" < "$srt_pkg/PACKAGE" | \
+    grep '^includedir *' | sed 's/^includedir *//' > conftest.inc
+
+  srt_pkg_includes="`cat conftest.inc`"
+  rm -f conftest.inc
+
+  if test -z "$srt_pkg_includes"; then
+    echo "$ac_t""(none)" 1>&6
+  else
+    echo "$ac_t""`echo $srt_pkg_includes`" 1>&6
+  fi
+
+  test -z "$srt_pkg_includes" && srt_pkg_includes=.
+
+  for srt_inc in $srt_pkg_includes; do
+    case "$srt_inc" in
+      /*)
+        srt_incs="$srt_incs -I$srt_inc" ;;
+      *)
+	case "$srt_inc" in
+	  .) srt_inc="" ;;
+	  *) srt_inc="/$srt_inc" ;;
+	esac
+	case "$srt_build_type:$srt_type" in
+	  *:dir)
+            srt_incs="$srt_incs -I$srt_dir/$srt_dot$srt_inc"
+            srt_incs="$srt_incs -I$srt_dir$srt_inc" ;;
+	  *:base)
+            srt_incs="$srt_incs -I$srt_base_inc/$srt_dir/$srt_dot$srt_inc"
+            srt_incs="$srt_incs -I$srt_base_inc/$srt_dir$srt_inc" ;;
+	  srcdir:root)
+            srt_incs="$srt_incs -I$srt_root_inc/$srt_dir$srt_inc" ;;
+	  srt:root)
+	    srt_incs="$srt_incs -I$srt_root_inc/$srt_dir/$srt_dot$srt_inc"
+	    srt_incs="$srt_incs -I$srt_root_inc/$srt_dir$srt_inc" ;;
+	  cwd:root)
+            srt_incs="$srt_incs -I$srt_build_root/$srt_dir$srt_inc"
+            srt_incs="$srt_incs -I$srt_root_inc/$srt_dir$srt_inc" ;;
+	esac
+    esac
+  done
+done
+
+
+echo $ac_n "checking for subpackages""... $ac_c" 1>&6
+srt_parts=
+for srt_dir in $srcdir/*; do
+  test -d $srt_dir || continue
+  test -f $srt_dir/PACKAGE || continue
+
+  srt_dir=`echo $srt_dir | sed "s|^$srcdir/||"`
+  srt_parts="$srt_parts $srt_dir"
+done
+echo "$ac_t""${srt_parts:-(none)}" 1>&6
+PACKAGES="$srt_parts"
+
+
+
+
+# If we cannot run a trivial program, we must be cross compiling.
+echo $ac_n "checking whether cross-compiling""... $ac_c" 1>&6
+if eval "test \"`echo '$''{'ac_cv_c_cross'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test "$cross_compiling" = yes; then
+  ac_cv_c_cross=yes
+else
+cat > conftest.$ac_ext <<EOF
+#line 1127 "configure"
+#include "confdefs.h"
+main(){return(0);}
+EOF
+{ (eval echo configure:1131: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }
+if test -s conftest && (./conftest; exit) 2>/dev/null; then
+  ac_cv_c_cross=no
+else
+  ac_cv_c_cross=yes
+fi
+fi
+rm -fr conftest*
+fi
+
+echo "$ac_t""$ac_cv_c_cross" 1>&6
+cross_compiling=$ac_cv_c_cross
+
+echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6
+if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  ac_cv_c_bigendian=unknown
+# See if sys/param.h defines the BYTE_ORDER macro.
+cat > conftest.$ac_ext <<EOF
+#line 1151 "configure"
+#include "confdefs.h"
+#include <sys/types.h>
+#include <sys/param.h>
+int main() { return 0; }
+int t() {
+
+#if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN
+ bogus endian macros
+#endif
+; return 0; }
+EOF
+if { (eval echo configure:1163: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  # It does; now see whether it defined to BIG_ENDIAN or not.
+cat > conftest.$ac_ext <<EOF
+#line 1167 "configure"
+#include "confdefs.h"
+#include <sys/types.h>
+#include <sys/param.h>
+int main() { return 0; }
+int t() {
+
+#if BYTE_ORDER != BIG_ENDIAN
+ not big endian
+#endif
+; return 0; }
+EOF
+if { (eval echo configure:1179: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  ac_cv_c_bigendian=yes
+else
+  rm -rf conftest*
+  ac_cv_c_bigendian=no
+fi
+rm -f conftest*
+
+fi
+rm -f conftest*
+
+if test $ac_cv_c_bigendian = unknown; then
+if test "$cross_compiling" = yes; then
+    { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
+else
+cat > conftest.$ac_ext <<EOF
+#line 1196 "configure"
+#include "confdefs.h"
+main () {
+  /* Are we little or big endian?  From Harbison&Steele.  */
+  union
+  {
+    long l;
+    char c[sizeof (long)];
+  } u;
+  u.l = 1;
+  exit (u.c[sizeof (long) - 1] == 1);
+}
+EOF
+{ (eval echo configure:1209: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }
+if test -s conftest && (./conftest; exit) 2>/dev/null; then
+  ac_cv_c_bigendian=no
+else
+  ac_cv_c_bigendian=yes
+fi
+fi
+rm -fr conftest*
+fi
+fi
+
+echo "$ac_t""$ac_cv_c_bigendian" 1>&6
+if test $ac_cv_c_bigendian = yes; then
+  cat >> confdefs.h <<\EOF
+#define WORDS_BIGENDIAN 1
+EOF
+
+fi
+
+echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+  CPP=
+fi
+if test -z "$CPP"; then
+if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+    # This must be in double quotes, not single quotes, because CPP may get
+  # substituted into the Makefile and "${CC-cc}" will confuse make.
+  CPP="${CC-cc} -E"
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp.
+  cat > conftest.$ac_ext <<EOF
+#line 1243 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext > conftest2.out 2>conftest.out"
+{ (eval echo configure:1249: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.$ac_ext\$"`
+if test -z "$ac_err"; then
+  :
+else
+  echo "$ac_err" >&5
+  rm -rf conftest*
+  CPP="${CC-cc} -E -traditional-cpp"
+  cat > conftest.$ac_ext <<EOF
+#line 1258 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext > conftest2.out 2>conftest.out"
+{ (eval echo configure:1264: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.$ac_ext\$"`
+if test -z "$ac_err"; then
+  :
+else
+  echo "$ac_err" >&5
+  rm -rf conftest*
+  CPP=/lib/cpp
+fi
+rm -f conftest*
+fi
+rm -f conftest*
+  ac_cv_prog_CPP="$CPP"
+fi
+  CPP="$ac_cv_prog_CPP"
+else
+  ac_cv_prog_CPP="$CPP"
+fi
+echo "$ac_t""$CPP" 1>&6
+
+echo $ac_n "checking whether char is unsigned""... $ac_c" 1>&6
+if eval "test \"`echo '$''{'ac_cv_c_char_unsigned'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test "$GCC" = yes; then
+  # GCC predefines this symbol on systems where it applies.
+cat > conftest.$ac_ext <<EOF
+#line 1291 "configure"
+#include "confdefs.h"
+#ifdef __CHAR_UNSIGNED__
+  yes
+#endif
+
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  egrep "yes" >/dev/null 2>&1; then
+  rm -rf conftest*
+  ac_cv_c_char_unsigned=yes
+else
+  rm -rf conftest*
+  ac_cv_c_char_unsigned=no
+fi
+rm -f conftest*
+
+else
+if test "$cross_compiling" = yes; then
+    { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
+else
+cat > conftest.$ac_ext <<EOF
+#line 1313 "configure"
+#include "confdefs.h"
+/* volatile prevents gcc2 from optimizing the test away on sparcs.  */
+#if !defined(__STDC__) || __STDC__ != 1
+#define volatile
+#endif
+main() {
+  volatile char c = 255; exit(c < 0);
+}
+EOF
+{ (eval echo configure:1323: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }
+if test -s conftest && (./conftest; exit) 2>/dev/null; then
+  ac_cv_c_char_unsigned=yes
+else
+  ac_cv_c_char_unsigned=no
+fi
+fi
+rm -fr conftest*
+fi
+fi
+
+echo "$ac_t""$ac_cv_c_char_unsigned" 1>&6
+if test $ac_cv_c_char_unsigned = yes && test "$GCC" != yes; then
+  cat >> confdefs.h <<\EOF
+#define __CHAR_UNSIGNED__ 1
+EOF
+
+fi
+
+
+case "$SRT_ARCH:${enable_mount_translations-yes}" in
+  *-cygwin32-*:yes)
+    echo $ac_n "checking paths for mount points""... $ac_c" 1>&6
+    
+srt_mounts=config.mts
+srt_mount=config.mt
+srt_match=config.mtc
+ac_clean_files="$ac_clean_files $srt_mount $srt_match"
+srt_remounted=
+/bin/mount | sed 's%^Device.*%%;s%\\%/%g' > $srt_mounts
+for srt_opt in $srt_root_libs; do
+  # Use mount table to remap $srt_opt to //drive/path; the result
+  # will be put into $srt_match, $srt_mounts will contain the mount point
+  case "$srt_opt" in
+    -L//* | -L?:/*)
+      if test -z "$srt_remounted"; then
+	srt_remounted="$srt_opt"
+      else
+	srt_remounted="$srt_remounted $srt_opt"
+      fi
+      continue;;
+  esac
+  echo > $srt_mount
+  echo > $srt_match
+  srt_matchdir= srt_matchdev=
+  while read srt_device srt_directory srt_rest; do
+    # see if $srt_directory matches beginning of -L$srt_opt; if there is
+    # a match, see which mount matches a longer prefix
+    case "$srt_opt" in
+      -L"$srt_directory"/* )
+	case "$srt_directory" in
+          "$srt_matchdir"/* )
+            srt_matchdir="$srt_directory"
+	    srt_matchdev="$srt_device"
+	    echo "$srt_matchdir" > $srt_mount
+	    echo "$srt_matchdev" | sed 's%^\(a-zA-Z\):/%//\1/%' > $srt_match
+	    ;;
+	esac
+    esac
+  done < $srt_mounts
+  read srt_matchdir < $srt_mount
+  read srt_matchdev < $srt_match
+  if test -n "$srt_matchdev"; then
+    srt_add="`echo \"$srt_opt\"|sed \"s%^-L$srt_matchdir/%-L$srt_matchdev/%\"`"
+  else
+    srt_add="$srt_opt"
+  fi
+  if test -z "$srt_remounted"; then
+    srt_remounted="$srt_add"
+  else
+    srt_remounted="$srt_remounted $srt_add"
+  fi
+done
+rm -f $srt_mount $srt_match
+srt_root_libs="$srt_remounted"
+
+    
+srt_mounts=config.mts
+srt_mount=config.mt
+srt_match=config.mtc
+ac_clean_files="$ac_clean_files $srt_mount $srt_match"
+srt_remounted=
+/bin/mount | sed 's%^Device.*%%;s%\\%/%g' > $srt_mounts
+for srt_opt in $srt_root_incs; do
+  # Use mount table to remap $srt_opt to //drive/path; the result
+  # will be put into $srt_match, $srt_mounts will contain the mount point
+  case "$srt_opt" in
+    -I//* | -I?:/*)
+      if test -z "$srt_remounted"; then
+	srt_remounted="$srt_opt"
+      else
+	srt_remounted="$srt_remounted $srt_opt"
+      fi
+      continue;;
+  esac
+  echo > $srt_mount
+  echo > $srt_match
+  srt_matchdir= srt_matchdev=
+  while read srt_device srt_directory srt_rest; do
+    # see if $srt_directory matches beginning of -I$srt_opt; if there is
+    # a match, see which mount matches a longer prefix
+    case "$srt_opt" in
+      -I"$srt_directory"/* )
+	case "$srt_directory" in
+          "$srt_matchdir"/* )
+            srt_matchdir="$srt_directory"
+	    srt_matchdev="$srt_device"
+	    echo "$srt_matchdir" > $srt_mount
+	    echo "$srt_matchdev" | sed 's%^\(a-zA-Z\):/%//\1/%' > $srt_match
+	    ;;
+	esac
+    esac
+  done < $srt_mounts
+  read srt_matchdir < $srt_mount
+  read srt_matchdev < $srt_match
+  if test -n "$srt_matchdev"; then
+    srt_add="`echo \"$srt_opt\"|sed \"s%^-I$srt_matchdir/%-I$srt_matchdev/%\"`"
+  else
+    srt_add="$srt_opt"
+  fi
+  if test -z "$srt_remounted"; then
+    srt_remounted="$srt_add"
+  else
+    srt_remounted="$srt_remounted $srt_add"
+  fi
+done
+rm -f $srt_mount $srt_match
+srt_root_incs="$srt_remounted"
+
+    
+srt_mounts=config.mts
+srt_mount=config.mt
+srt_match=config.mtc
+ac_clean_files="$ac_clean_files $srt_mount $srt_match"
+srt_remounted=
+/bin/mount | sed 's%^Device.*%%;s%\\%/%g' > $srt_mounts
+for srt_opt in $srt_base_libs; do
+  # Use mount table to remap $srt_opt to //drive/path; the result
+  # will be put into $srt_match, $srt_mounts will contain the mount point
+  case "$srt_opt" in
+    -L//* | -L?:/*)
+      if test -z "$srt_remounted"; then
+	srt_remounted="$srt_opt"
+      else
+	srt_remounted="$srt_remounted $srt_opt"
+      fi
+      continue;;
+  esac
+  echo > $srt_mount
+  echo > $srt_match
+  srt_matchdir= srt_matchdev=
+  while read srt_device srt_directory srt_rest; do
+    # see if $srt_directory matches beginning of -L$srt_opt; if there is
+    # a match, see which mount matches a longer prefix
+    case "$srt_opt" in
+      -L"$srt_directory"/* )
+	case "$srt_directory" in
+          "$srt_matchdir"/* )
+            srt_matchdir="$srt_directory"
+	    srt_matchdev="$srt_device"
+	    echo "$srt_matchdir" > $srt_mount
+	    echo "$srt_matchdev" | sed 's%^\(a-zA-Z\):/%//\1/%' > $srt_match
+	    ;;
+	esac
+    esac
+  done < $srt_mounts
+  read srt_matchdir < $srt_mount
+  read srt_matchdev < $srt_match
+  if test -n "$srt_matchdev"; then
+    srt_add="`echo \"$srt_opt\"|sed \"s%^-L$srt_matchdir/%-L$srt_matchdev/%\"`"
+  else
+    srt_add="$srt_opt"
+  fi
+  if test -z "$srt_remounted"; then
+    srt_remounted="$srt_add"
+  else
+    srt_remounted="$srt_remounted $srt_add"
+  fi
+done
+rm -f $srt_mount $srt_match
+srt_base_libs="$srt_remounted"
+
+    
+srt_mounts=config.mts
+srt_mount=config.mt
+srt_match=config.mtc
+ac_clean_files="$ac_clean_files $srt_mount $srt_match"
+srt_remounted=
+/bin/mount | sed 's%^Device.*%%;s%\\%/%g' > $srt_mounts
+for srt_opt in $srt_base_incs; do
+  # Use mount table to remap $srt_opt to //drive/path; the result
+  # will be put into $srt_match, $srt_mounts will contain the mount point
+  case "$srt_opt" in
+    -I//* | -I?:/*)
+      if test -z "$srt_remounted"; then
+	srt_remounted="$srt_opt"
+      else
+	srt_remounted="$srt_remounted $srt_opt"
+      fi
+      continue;;
+  esac
+  echo > $srt_mount
+  echo > $srt_match
+  srt_matchdir= srt_matchdev=
+  while read srt_device srt_directory srt_rest; do
+    # see if $srt_directory matches beginning of -I$srt_opt; if there is
+    # a match, see which mount matches a longer prefix
+    case "$srt_opt" in
+      -I"$srt_directory"/* )
+	case "$srt_directory" in
+          "$srt_matchdir"/* )
+            srt_matchdir="$srt_directory"
+	    srt_matchdev="$srt_device"
+	    echo "$srt_matchdir" > $srt_mount
+	    echo "$srt_matchdev" | sed 's%^\(a-zA-Z\):/%//\1/%' > $srt_match
+	    ;;
+	esac
+    esac
+  done < $srt_mounts
+  read srt_matchdir < $srt_mount
+  read srt_matchdev < $srt_match
+  if test -n "$srt_matchdev"; then
+    srt_add="`echo \"$srt_opt\"|sed \"s%^-I$srt_matchdir/%-I$srt_matchdev/%\"`"
+  else
+    srt_add="$srt_opt"
+  fi
+  if test -z "$srt_remounted"; then
+    srt_remounted="$srt_add"
+  else
+    srt_remounted="$srt_remounted $srt_add"
+  fi
+done
+rm -f $srt_mount $srt_match
+srt_base_incs="$srt_remounted"
+
+    
+srt_mounts=config.mts
+srt_mount=config.mt
+srt_match=config.mtc
+ac_clean_files="$ac_clean_files $srt_mount $srt_match"
+srt_remounted=
+/bin/mount | sed 's%^Device.*%%;s%\\%/%g' > $srt_mounts
+for srt_opt in $srt_incs; do
+  # Use mount table to remap $srt_opt to //drive/path; the result
+  # will be put into $srt_match, $srt_mounts will contain the mount point
+  case "$srt_opt" in
+    -I//* | -I?:/*)
+      if test -z "$srt_remounted"; then
+	srt_remounted="$srt_opt"
+      else
+	srt_remounted="$srt_remounted $srt_opt"
+      fi
+      continue;;
+  esac
+  echo > $srt_mount
+  echo > $srt_match
+  srt_matchdir= srt_matchdev=
+  while read srt_device srt_directory srt_rest; do
+    # see if $srt_directory matches beginning of -I$srt_opt; if there is
+    # a match, see which mount matches a longer prefix
+    case "$srt_opt" in
+      -I"$srt_directory"/* )
+	case "$srt_directory" in
+          "$srt_matchdir"/* )
+            srt_matchdir="$srt_directory"
+	    srt_matchdev="$srt_device"
+	    echo "$srt_matchdir" > $srt_mount
+	    echo "$srt_matchdev" | sed 's%^\(a-zA-Z\):/%//\1/%' > $srt_match
+	    ;;
+	esac
+    esac
+  done < $srt_mounts
+  read srt_matchdir < $srt_mount
+  read srt_matchdev < $srt_match
+  if test -n "$srt_matchdev"; then
+    srt_add="`echo \"$srt_opt\"|sed \"s%^-I$srt_matchdir/%-I$srt_matchdev/%\"`"
+  else
+    srt_add="$srt_opt"
+  fi
+  if test -z "$srt_remounted"; then
+    srt_remounted="$srt_add"
+  else
+    srt_remounted="$srt_remounted $srt_add"
+  fi
+done
+rm -f $srt_mount $srt_match
+srt_incs="$srt_remounted"
+
+    
+srt_mounts=config.mts
+srt_mount=config.mt
+srt_match=config.mtc
+ac_clean_files="$ac_clean_files $srt_mount $srt_match"
+srt_remounted=
+/bin/mount | sed 's%^Device.*%%;s%\\%/%g' > $srt_mounts
+for srt_opt in $prefix; do
+  # Use mount table to remap $srt_opt to //drive/path; the result
+  # will be put into $srt_match, $srt_mounts will contain the mount point
+  case "$srt_opt" in
+    //* | ?:/*)
+      if test -z "$srt_remounted"; then
+	srt_remounted="$srt_opt"
+      else
+	srt_remounted="$srt_remounted $srt_opt"
+      fi
+      continue;;
+  esac
+  echo > $srt_mount
+  echo > $srt_match
+  srt_matchdir= srt_matchdev=
+  while read srt_device srt_directory srt_rest; do
+    # see if $srt_directory matches beginning of $srt_opt; if there is
+    # a match, see which mount matches a longer prefix
+    case "$srt_opt" in
+      "$srt_directory"/* )
+	case "$srt_directory" in
+          "$srt_matchdir"/* )
+            srt_matchdir="$srt_directory"
+	    srt_matchdev="$srt_device"
+	    echo "$srt_matchdir" > $srt_mount
+	    echo "$srt_matchdev" | sed 's%^\(a-zA-Z\):/%//\1/%' > $srt_match
+	    ;;
+	esac
+    esac
+  done < $srt_mounts
+  read srt_matchdir < $srt_mount
+  read srt_matchdev < $srt_match
+  if test -n "$srt_matchdev"; then
+    srt_add="`echo \"$srt_opt\"|sed \"s%^$srt_matchdir/%$srt_matchdev/%\"`"
+  else
+    srt_add="$srt_opt"
+  fi
+  if test -z "$srt_remounted"; then
+    srt_remounted="$srt_add"
+  else
+    srt_remounted="$srt_remounted $srt_add"
+  fi
+done
+rm -f $srt_mount $srt_match
+prefix="$srt_remounted"
+
+    
+srt_mounts=config.mts
+srt_mount=config.mt
+srt_match=config.mtc
+ac_clean_files="$ac_clean_files $srt_mount $srt_match"
+srt_remounted=
+/bin/mount | sed 's%^Device.*%%;s%\\%/%g' > $srt_mounts
+for srt_opt in $srt_root; do
+  # Use mount table to remap $srt_opt to //drive/path; the result
+  # will be put into $srt_match, $srt_mounts will contain the mount point
+  case "$srt_opt" in
+    //* | ?:/*)
+      if test -z "$srt_remounted"; then
+	srt_remounted="$srt_opt"
+      else
+	srt_remounted="$srt_remounted $srt_opt"
+      fi
+      continue;;
+  esac
+  echo > $srt_mount
+  echo > $srt_match
+  srt_matchdir= srt_matchdev=
+  while read srt_device srt_directory srt_rest; do
+    # see if $srt_directory matches beginning of $srt_opt; if there is
+    # a match, see which mount matches a longer prefix
+    case "$srt_opt" in
+      "$srt_directory"/* )
+	case "$srt_directory" in
+          "$srt_matchdir"/* )
+            srt_matchdir="$srt_directory"
+	    srt_matchdev="$srt_device"
+	    echo "$srt_matchdir" > $srt_mount
+	    echo "$srt_matchdev" | sed 's%^\(a-zA-Z\):/%//\1/%' > $srt_match
+	    ;;
+	esac
+    esac
+  done < $srt_mounts
+  read srt_matchdir < $srt_mount
+  read srt_matchdev < $srt_match
+  if test -n "$srt_matchdev"; then
+    srt_add="`echo \"$srt_opt\"|sed \"s%^$srt_matchdir/%$srt_matchdev/%\"`"
+  else
+    srt_add="$srt_opt"
+  fi
+  if test -z "$srt_remounted"; then
+    srt_remounted="$srt_add"
+  else
+    srt_remounted="$srt_remounted $srt_add"
+  fi
+done
+rm -f $srt_mount $srt_match
+srt_posix_root="$srt_remounted"
+
+    
+srt_mounts=config.mts
+srt_mount=config.mt
+srt_match=config.mtc
+ac_clean_files="$ac_clean_files $srt_mount $srt_match"
+srt_remounted=
+/bin/mount | sed 's%^Device.*%%;s%\\%/%g' > $srt_mounts
+for srt_opt in $srt_base; do
+  # Use mount table to remap $srt_opt to //drive/path; the result
+  # will be put into $srt_match, $srt_mounts will contain the mount point
+  case "$srt_opt" in
+    //* | ?:/*)
+      if test -z "$srt_remounted"; then
+	srt_remounted="$srt_opt"
+      else
+	srt_remounted="$srt_remounted $srt_opt"
+      fi
+      continue;;
+  esac
+  echo > $srt_mount
+  echo > $srt_match
+  srt_matchdir= srt_matchdev=
+  while read srt_device srt_directory srt_rest; do
+    # see if $srt_directory matches beginning of $srt_opt; if there is
+    # a match, see which mount matches a longer prefix
+    case "$srt_opt" in
+      "$srt_directory"/* )
+	case "$srt_directory" in
+          "$srt_matchdir"/* )
+            srt_matchdir="$srt_directory"
+	    srt_matchdev="$srt_device"
+	    echo "$srt_matchdir" > $srt_mount
+	    echo "$srt_matchdev" | sed 's%^\(a-zA-Z\):/%//\1/%' > $srt_match
+	    ;;
+	esac
+    esac
+  done < $srt_mounts
+  read srt_matchdir < $srt_mount
+  read srt_matchdev < $srt_match
+  if test -n "$srt_matchdev"; then
+    srt_add="`echo \"$srt_opt\"|sed \"s%^$srt_matchdir/%$srt_matchdev/%\"`"
+  else
+    srt_add="$srt_opt"
+  fi
+  if test -z "$srt_remounted"; then
+    srt_remounted="$srt_add"
+  else
+    srt_remounted="$srt_remounted $srt_add"
+  fi
+done
+rm -f $srt_mount $srt_match
+srt_posix_base="$srt_remounted"
+
+    
+srt_mounts=config.mts
+srt_mount=config.mt
+srt_match=config.mtc
+ac_clean_files="$ac_clean_files $srt_mount $srt_match"
+srt_remounted=
+/bin/mount | sed 's%^Device.*%%;s%\\%/%g' > $srt_mounts
+for srt_opt in $srt_base_package; do
+  # Use mount table to remap $srt_opt to //drive/path; the result
+  # will be put into $srt_match, $srt_mounts will contain the mount point
+  case "$srt_opt" in
+    //* | ?:/*)
+      if test -z "$srt_remounted"; then
+	srt_remounted="$srt_opt"
+      else
+	srt_remounted="$srt_remounted $srt_opt"
+      fi
+      continue;;
+  esac
+  echo > $srt_mount
+  echo > $srt_match
+  srt_matchdir= srt_matchdev=
+  while read srt_device srt_directory srt_rest; do
+    # see if $srt_directory matches beginning of $srt_opt; if there is
+    # a match, see which mount matches a longer prefix
+    case "$srt_opt" in
+      "$srt_directory"/* )
+	case "$srt_directory" in
+          "$srt_matchdir"/* )
+            srt_matchdir="$srt_directory"
+	    srt_matchdev="$srt_device"
+	    echo "$srt_matchdir" > $srt_mount
+	    echo "$srt_matchdev" | sed 's%^\(a-zA-Z\):/%//\1/%' > $srt_match
+	    ;;
+	esac
+    esac
+  done < $srt_mounts
+  read srt_matchdir < $srt_mount
+  read srt_matchdev < $srt_match
+  if test -n "$srt_matchdev"; then
+    srt_add="`echo \"$srt_opt\"|sed \"s%^$srt_matchdir/%$srt_matchdev/%\"`"
+  else
+    srt_add="$srt_opt"
+  fi
+  if test -z "$srt_remounted"; then
+    srt_remounted="$srt_add"
+  else
+    srt_remounted="$srt_remounted $srt_add"
+  fi
+done
+rm -f $srt_mount $srt_match
+srt_posix_base_package="$srt_remounted"
+
+    echo "$ac_t""done" 1>&6
+    ;;
+  *)
+    srt_posix_root="$srt_root"
+    srt_posix_base="$srt_base"
+    srt_posix_base_package="$srt_base_package"
+    ;;
+esac
+
+
+
+
+
+srt_rdots= srt_bdots= srt_bpdots=
+test $srt_root_is_relative = yes && srt_rdots='@top_srcdir@/'
+test $srt_base_is_relative = yes && srt_bdots='@top_srcdir@/'
+test $srt_base_package_is_relative = yes && srt_bpdots='@top_srcdir@/'
+
+rm -f .makestate.in
+cat > .makestate.in <<EOF
+_root=${srt_rdots}${srt_posix_root}
+_base_release=${srt_bdots}${srt_posix_base}
+_base_package=${srt_bpdots}${srt_posix_base_package}
+_IMPORT_PPFLAGS=$srt_incs $srt_root_incs $srt_base_incs
+_IMPORT_LDFLAGS=$srt_root_libs $srt_base_libs
+top_srcdir=@top_srcdir@
+srcdir=@srcdir@
+prefix=$prefix
+exec_prefix=$exec_prefix
+bindir=$bindir
+sbindir=$sbindir
+libexecdir=$libexecdir
+datadir=$datadir
+sharedstatedir=$sharedstatedir
+localstatedir=$localstatedir
+libdir=$libdir
+docdir=$docdir
+includedir=$includedir
+archincludedir=$archincludedir
+mandir=$mandir
+EOF
+
+if test "${OPTION_SETS+set}" = set; then
+  echo "_OPTION_SETS=$OPTION_SETS" >> .makestate.in
+fi
+
+echo 'include .makestate-deps' >> .makestate.in
+
+# Add subpackage dependency information to `.makestate-deps'
+echo "# deps" > .makestate-deps
+for srt_dir in $PACKAGES; do
+  sed "s/#.*//" < "$srcdir/$srt_dir/PACKAGE" | grep '^depend[ 	]*' | \
+    sed 's/^depend[ 	]*//' >> .makestate-deps
+done
+
+trap '' 1 2 15
+cat > confcache <<\EOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs.  It is not useful on other systems.
+# If it contains results you don't want to keep, you may remove or edit it.
+#
+# By default, configure uses ./config.cache as the cache file,
+# creating it if it does not exist already.  You can give configure
+# the --cache-file=FILE option to use a different cache file; that is
+# what configure does when it calls configure scripts in
+# subdirectories, so they share the cache.
+# Giving --cache-file=/dev/null disables caching, for debugging configure.
+# config.status only pays attention to the cache file if you give it the
+# --recheck option to rerun configure.
+#
+EOF
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(set) 2>&1 |
+  sed -n "s/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=\${\1='\2'}/p" \
+  >> confcache
+if cmp -s $cache_file confcache; then
+  :
+else
+  if test -w $cache_file; then
+    echo "updating cache $cache_file"
+    cat confcache > $cache_file
+  else
+    echo "not updating unwritable cache $cache_file"
+  fi
+fi
+rm -f confcache
+
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# Any assignment to VPATH causes Sun make to only execute
+# the first set of double-colon rules, so remove it if not needed.
+# If there is a colon in the path, we need to keep it.
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
+fi
+
+trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
+
+# Transform confdefs.h into DEFS.
+# Protect against shell expansion while executing Makefile rules.
+# Protect against Makefile macro expansion.
+cat > conftest.defs <<\EOF
+s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
+s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
+s%\[%\\&%g
+s%\]%\\&%g
+s%\$%$$%g
+EOF
+DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
+rm -f conftest.defs
+
+
+# Without the "./", some shells look in PATH for config.status.
+: ${CONFIG_STATUS=./config.status}
+
+echo creating $CONFIG_STATUS
+rm -f $CONFIG_STATUS
+cat > $CONFIG_STATUS <<EOF
+#! /bin/sh
+# Generated automatically by configure.
+# Run this file to recreate the current configuration.
+# This directory was configured as follows,
+# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+#
+# $0 $ac_configure_args
+#
+# Compiler output produced by configure, useful for debugging
+# configure, is in ./config.log if it exists.
+
+ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
+for ac_option
+do
+  case "\$ac_option" in
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
+    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
+  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
+    echo "$CONFIG_STATUS generated by autoconf version 2.10"
+    exit 0 ;;
+  -help | --help | --hel | --he | --h)
+    echo "\$ac_cs_usage"; exit 0 ;;
+  *) echo "\$ac_cs_usage"; exit 1 ;;
+  esac
+done
+
+ac_given_srcdir=$srcdir
+
+trap 'rm -fr `echo "GNUmakefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+EOF
+cat >> $CONFIG_STATUS <<EOF
+
+# Protect against being on the right side of a sed subst in config.status.
+sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
+ s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
+$ac_vpsub
+$extrasub
+s%@CFLAGS@%$CFLAGS%g
+s%@CPPFLAGS@%$CPPFLAGS%g
+s%@CXXFLAGS@%$CXXFLAGS%g
+s%@DEFS@%$DEFS%g
+s%@LDFLAGS@%$LDFLAGS%g
+s%@LIBS@%$LIBS%g
+s%@exec_prefix@%$exec_prefix%g
+s%@prefix@%$prefix%g
+s%@program_transform_name@%$program_transform_name%g
+s%@bindir@%$bindir%g
+s%@sbindir@%$sbindir%g
+s%@libexecdir@%$libexecdir%g
+s%@datadir@%$datadir%g
+s%@sysconfdir@%$sysconfdir%g
+s%@sharedstatedir@%$sharedstatedir%g
+s%@localstatedir@%$localstatedir%g
+s%@libdir@%$libdir%g
+s%@includedir@%$includedir%g
+s%@oldincludedir@%$oldincludedir%g
+s%@infodir@%$infodir%g
+s%@mandir@%$mandir%g
+s%@CXX@%$CXX%g
+s%@CXXCPPFLAGS@%$CXXCPPFLAGS%g
+s%@CC@%$CC%g
+s%@FC@%$FC%g
+s%@FCFLAGS@%$FCFLAGS%g
+s%@FCPPFLAGS@%$FCPPFLAGS%g
+s%@F90@%$F90%g
+s%@F90CFLAGS@%$F90CFLAGS%g
+s%@F90CPPFLAGS@%$F90CPPFLAGS%g
+s%@docdir@%$docdir%g
+s%@archincludedir@%$archincludedir%g
+s%@GMAKE@%$GMAKE%g
+s%@OPTION_SETS@%$OPTION_SETS%g
+s%@PACKAGES@%$PACKAGES%g
+s%@CPP@%$CPP%g
+s%@srt_posix_root@%$srt_posix_root%g
+s%@srt_posix_base@%$srt_posix_base%g
+s%@srt_posix_base_package@%$srt_posix_base_package%g
+
+CEOF
+EOF
+cat >> $CONFIG_STATUS <<EOF
+
+CONFIG_FILES=\${CONFIG_FILES-"GNUmakefile"}
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
+  # Support "outfile[:infile]", defaulting infile="outfile.in".
+  case "$ac_file" in
+  *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'`
+       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+  *) ac_file_in="${ac_file}.in" ;;
+  esac
+
+  # Adjust relative srcdir, etc. for subdirectories.
+
+  # Remove last slash and all that follows it.  Not all systems have dirname.
+  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
+  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
+    # The file is in a subdirectory.
+    test ! -d "$ac_dir" && mkdir "$ac_dir"
+    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
+    # A "../" for each directory in $ac_dir_suffix.
+    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
+  else
+    ac_dir_suffix= ac_dots=
+  fi
+
+  case "$ac_given_srcdir" in
+  .)  srcdir=.
+      if test -z "$ac_dots"; then top_srcdir=.
+      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
+  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
+  *) # Relative path.
+    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
+    top_srcdir="$ac_dots$ac_given_srcdir" ;;
+  esac
+
+  echo creating "$ac_file"
+  rm -f "$ac_file"
+  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
+  case "$ac_file" in
+  *Makefile*) ac_comsub="1i\\
+# $configure_input" ;;
+  *) ac_comsub= ;;
+  esac
+  sed -e "$ac_comsub
+s%@configure_input@%$configure_input%g
+s%@srcdir@%$srcdir%g
+s%@top_srcdir@%$top_srcdir%g
+" -f conftest.subs $ac_given_srcdir/$ac_file_in > $ac_file
+fi; done
+rm -f conftest.subs
+
+
+
+exit 0
+EOF
+chmod +x $CONFIG_STATUS
+rm -fr confdefs* $ac_clean_files
+test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
+
+
+for srt_file in GNUmakefile; do
+  case "$srt_file" in
+    GNUmakefile | GNUmakefile:* )
+      srt_file=.makestate ;;
+    */GNUmakefile | */GNUmakefile:* )
+      srt_file="`echo $srt_file|sed 's%/GNUmakefile[^/]*%/.makestate%'`";;
+    *)
+      continue;;
+  esac
+
+  # Remove last slash and all that follows it.  Not all systems have dirname.
+  srt_dir=`echo $srt_file | sed 's|/[^/][^/]*$||'`
+
+  if test "$srt_dir" != "$srt_file" && test "$srt_dir" != .; then
+    # The file is in a subdirectory
+    test -d "$srt_dir" || mkdir "$srt_dir" || exit 1
+
+    srt_dir_suffix="/`echo $srt_dir|sed 's|^\./||'`"
+    # A "../" for each directory in $srt_dir_suffix.
+    srt_dots="`echo $srt_dir_suffix|sed 's|/[^/]*|../|g'`"
+  else
+    srt_dir_suffix=
+    srt_dots=
+  fi
+
+  case "$srcdir" in
+    .)	srt_srcdir=.
+	if test -z "$srt_dots"; then srt_top_srcdir=.
+	else srt_top_srcdir="`echo $srt_dots|sed 's%/$%%'`"; fi ;;
+    /*) srt_srcdir="$srcdir$srt_dir_suffix"
+	srt_top_srcdir="$srcdir" ;;
+    *)  srt_srcdir="$srt_dots$srcdir$srt_dir_suffix"
+	srt_top_srcdir="$srt_dots$srcdir" ;;
+  esac
+
+  echo "creating $srt_file"
+  sed -e "s|@srcdir@|$srt_srcdir|g" \
+      -e "s|@top_srcdir@|$srt_top_srcdir|g;" \
+      < .makestate.in > "$srt_file"
+
+  test -f "${srt_file}-deps" || echo "# deps: none" > "${srt_file}-deps"
+done
+
+# Configure subpackages
+
+if test "$no_recursion" != yes; then
+
+  # Remove --cache-file and --srcdir arguments so they do not pile up.
+  srt_sub_configure_args=
+  srt_prev=
+  for srt_arg in $ac_configure_args; do
+    if test -n "$srt_prev"; then
+      srt_prev=
+      continue
+    fi
+    case "$srt_arg" in
+    -cache-file | --cache-file | --cache-fil | --cache-fi \
+    | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+      srt_prev=cache_file ;;
+    -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+    | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+      ;;
+    -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+      srt_prev=srcdir ;;
+    -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+      ;;
+    *) srt_sub_configure_args="$srt_sub_configure_args $srt_arg" ;;
+    esac
+  done
+
+  for srt_config_dir in $srt_parts; do
+    # Barf (but continue) if the specified directory does not exist.
+    if test ! -d $srcdir/$srt_config_dir; then
+      echo "configure: warning: skipped non-existent nested package $srt_config_dir" 1>&2
+      continue
+    fi
+
+    echo configuring in $srt_config_dir
+    srt_package=$srt_config_dir
+
+    # Propagate base release, base package and release root information
+    if test -d $srcdir/$srt_config_dir/.srt; then :;
+    else
+      mkdir $srcdir/$srt_config_dir/.srt ||
+	{ echo "configure: error: can not create $srcdir/$srt_config_dir/.srt" 1>&2; exit 1; }
+    fi
+    
+    srt_bdots= srt_rdots= srt_bpdots=
+    test $srt_base_is_relative = yes && srt_bdots="../"
+    test $srt_root_is_relative = yes && srt_rdots="../"
+    test $srt_base_package_is_relative = yes && srt_bpdots="../"
+
+    case "$srt_base" in
+      .) srt_sub_base=".."
+	 echo ".." > $srcdir/$srt_config_dir/.srt/base-release ;;
+      *) srt_sub_base="$srt_bdots$srt_posix_base"
+	 echo "$srt_bdots$srt_base" > $srcdir/$srt_config_dir/.srt/base-release ;;