mutated_ocaml / configure

   1
   2
   3
   4
   5
   6
   7
   8
   9
  10
  11
  12
  13
  14
  15
  16
  17
  18
  19
  20
  21
  22
  23
  24
  25
  26
  27
  28
  29
  30
  31
  32
  33
  34
  35
  36
  37
  38
  39
  40
  41
  42
  43
  44
  45
  46
  47
  48
  49
  50
  51
  52
  53
  54
  55
  56
  57
  58
  59
  60
  61
  62
  63
  64
  65
  66
  67
  68
  69
  70
  71
  72
  73
  74
  75
  76
  77
  78
  79
  80
  81
  82
  83
  84
  85
  86
  87
  88
  89
  90
  91
  92
  93
  94
  95
  96
  97
  98
  99
 100
 101
 102
 103
 104
 105
 106
 107
 108
 109
 110
 111
 112
 113
 114
 115
 116
 117
 118
 119
 120
 121
 122
 123
 124
 125
 126
 127
 128
 129
 130
 131
 132
 133
 134
 135
 136
 137
 138
 139
 140
 141
 142
 143
 144
 145
 146
 147
 148
 149
 150
 151
 152
 153
 154
 155
 156
 157
 158
 159
 160
 161
 162
 163
 164
 165
 166
 167
 168
 169
 170
 171
 172
 173
 174
 175
 176
 177
 178
 179
 180
 181
 182
 183
 184
 185
 186
 187
 188
 189
 190
 191
 192
 193
 194
 195
 196
 197
 198
 199
 200
 201
 202
 203
 204
 205
 206
 207
 208
 209
 210
 211
 212
 213
 214
 215
 216
 217
 218
 219
 220
 221
 222
 223
 224
 225
 226
 227
 228
 229
 230
 231
 232
 233
 234
 235
 236
 237
 238
 239
 240
 241
 242
 243
 244
 245
 246
 247
 248
 249
 250
 251
 252
 253
 254
 255
 256
 257
 258
 259
 260
 261
 262
 263
 264
 265
 266
 267
 268
 269
 270
 271
 272
 273
 274
 275
 276
 277
 278
 279
 280
 281
 282
 283
 284
 285
 286
 287
 288
 289
 290
 291
 292
 293
 294
 295
 296
 297
 298
 299
 300
 301
 302
 303
 304
 305
 306
 307
 308
 309
 310
 311
 312
 313
 314
 315
 316
 317
 318
 319
 320
 321
 322
 323
 324
 325
 326
 327
 328
 329
 330
 331
 332
 333
 334
 335
 336
 337
 338
 339
 340
 341
 342
 343
 344
 345
 346
 347
 348
 349
 350
 351
 352
 353
 354
 355
 356
 357
 358
 359
 360
 361
 362
 363
 364
 365
 366
 367
 368
 369
 370
 371
 372
 373
 374
 375
 376
 377
 378
 379
 380
 381
 382
 383
 384
 385
 386
 387
 388
 389
 390
 391
 392
 393
 394
 395
 396
 397
 398
 399
 400
 401
 402
 403
 404
 405
 406
 407
 408
 409
 410
 411
 412
 413
 414
 415
 416
 417
 418
 419
 420
 421
 422
 423
 424
 425
 426
 427
 428
 429
 430
 431
 432
 433
 434
 435
 436
 437
 438
 439
 440
 441
 442
 443
 444
 445
 446
 447
 448
 449
 450
 451
 452
 453
 454
 455
 456
 457
 458
 459
 460
 461
 462
 463
 464
 465
 466
 467
 468
 469
 470
 471
 472
 473
 474
 475
 476
 477
 478
 479
 480
 481
 482
 483
 484
 485
 486
 487
 488
 489
 490
 491
 492
 493
 494
 495
 496
 497
 498
 499
 500
 501
 502
 503
 504
 505
 506
 507
 508
 509
 510
 511
 512
 513
 514
 515
 516
 517
 518
 519
 520
 521
 522
 523
 524
 525
 526
 527
 528
 529
 530
 531
 532
 533
 534
 535
 536
 537
 538
 539
 540
 541
 542
 543
 544
 545
 546
 547
 548
 549
 550
 551
 552
 553
 554
 555
 556
 557
 558
 559
 560
 561
 562
 563
 564
 565
 566
 567
 568
 569
 570
 571
 572
 573
 574
 575
 576
 577
 578
 579
 580
 581
 582
 583
 584
 585
 586
 587
 588
 589
 590
 591
 592
 593
 594
 595
 596
 597
 598
 599
 600
 601
 602
 603
 604
 605
 606
 607
 608
 609
 610
 611
 612
 613
 614
 615
 616
 617
 618
 619
 620
 621
 622
 623
 624
 625
 626
 627
 628
 629
 630
 631
 632
 633
 634
 635
 636
 637
 638
 639
 640
 641
 642
 643
 644
 645
 646
 647
 648
 649
 650
 651
 652
 653
 654
 655
 656
 657
 658
 659
 660
 661
 662
 663
 664
 665
 666
 667
 668
 669
 670
 671
 672
 673
 674
 675
 676
 677
 678
 679
 680
 681
 682
 683
 684
 685
 686
 687
 688
 689
 690
 691
 692
 693
 694
 695
 696
 697
 698
 699
 700
 701
 702
 703
 704
 705
 706
 707
 708
 709
 710
 711
 712
 713
 714
 715
 716
 717
 718
 719
 720
 721
 722
 723
 724
 725
 726
 727
 728
 729
 730
 731
 732
 733
 734
 735
 736
 737
 738
 739
 740
 741
 742
 743
 744
 745
 746
 747
 748
 749
 750
 751
 752
 753
 754
 755
 756
 757
 758
 759
 760
 761
 762
 763
 764
 765
 766
 767
 768
 769
 770
 771
 772
 773
 774
 775
 776
 777
 778
 779
 780
 781
 782
 783
 784
 785
 786
 787
 788
 789
 790
 791
 792
 793
 794
 795
 796
 797
 798
 799
 800
 801
 802
 803
 804
 805
 806
 807
 808
 809
 810
 811
 812
 813
 814
 815
 816
 817
 818
 819
 820
 821
 822
 823
 824
 825
 826
 827
 828
 829
 830
 831
 832
 833
 834
 835
 836
 837
 838
 839
 840
 841
 842
 843
 844
 845
 846
 847
 848
 849
 850
 851
 852
 853
 854
 855
 856
 857
 858
 859
 860
 861
 862
 863
 864
 865
 866
 867
 868
 869
 870
 871
 872
 873
 874
 875
 876
 877
 878
 879
 880
 881
 882
 883
 884
 885
 886
 887
 888
 889
 890
 891
 892
 893
 894
 895
 896
 897
 898
 899
 900
 901
 902
 903
 904
 905
 906
 907
 908
 909
 910
 911
 912
 913
 914
 915
 916
 917
 918
 919
 920
 921
 922
 923
 924
 925
 926
 927
 928
 929
 930
 931
 932
 933
 934
 935
 936
 937
 938
 939
 940
 941
 942
 943
 944
 945
 946
 947
 948
 949
 950
 951
 952
 953
 954
 955
 956
 957
 958
 959
 960
 961
 962
 963
 964
 965
 966
 967
 968
 969
 970
 971
 972
 973
 974
 975
 976
 977
 978
 979
 980
 981
 982
 983
 984
 985
 986
 987
 988
 989
 990
 991
 992
 993
 994
 995
 996
 997
 998
 999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
1351
1352
1353
1354
1355
1356
1357
1358
1359
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1371
1372
1373
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1385
1386
1387
1388
1389
1390
1391
1392
1393
1394
1395
1396
1397
1398
1399
1400
1401
1402
1403
1404
1405
1406
1407
1408
1409
1410
1411
1412
1413
1414
1415
1416
1417
1418
1419
1420
1421
1422
1423
1424
1425
1426
1427
1428
1429
1430
1431
1432
1433
1434
1435
1436
1437
1438
1439
1440
1441
1442
1443
1444
1445
1446
1447
1448
1449
1450
1451
1452
1453
1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1477
1478
1479
1480
1481
1482
1483
1484
1485
1486
1487
1488
1489
1490
1491
1492
1493
1494
1495
1496
1497
1498
1499
1500
1501
1502
1503
1504
1505
1506
1507
1508
1509
1510
1511
1512
1513
1514
1515
1516
1517
1518
1519
1520
1521
1522
1523
1524
1525
1526
1527
1528
1529
1530
1531
1532
1533
1534
1535
1536
1537
1538
1539
1540
1541
1542
1543
1544
1545
1546
1547
1548
1549
1550
1551
1552
1553
1554
1555
1556
1557
1558
1559
1560
1561
1562
1563
1564
1565
1566
1567
1568
1569
1570
1571
1572
1573
1574
1575
1576
1577
1578
1579
1580
1581
1582
1583
1584
1585
1586
1587
1588
1589
1590
1591
1592
1593
1594
1595
1596
1597
1598
1599
1600
1601
1602
1603
1604
1605
1606
1607
1608
1609
1610
1611
1612
1613
1614
1615
1616
1617
1618
1619
1620
1621
1622
1623
1624
1625
1626
1627
1628
1629
1630
1631
1632
1633
1634
1635
1636
1637
1638
1639
1640
1641
1642
1643
1644
1645
1646
1647
1648
1649
1650
1651
1652
1653
1654
1655
1656
1657
1658
1659
1660
1661
1662
1663
1664
1665
1666
1667
1668
1669
1670
1671
1672
1673
1674
1675
1676
1677
1678
1679
1680
1681
1682
1683
1684
1685
1686
1687
1688
1689
1690
1691
1692
1693
1694
1695
1696
1697
1698
1699
1700
1701
1702
1703
1704
1705
1706
1707
1708
1709
1710
1711
1712
1713
1714
1715
1716
1717
1718
1719
1720
1721
1722
1723
1724
1725
1726
1727
1728
1729
1730
1731
1732
1733
1734
1735
1736
1737
1738
1739
1740
#! /bin/sh

#########################################################################
#                                                                       #
#                                 OCaml                                 #
#                                                                       #
#            Xavier Leroy, projet Cristal, INRIA Rocquencourt           #
#                                                                       #
#   Copyright 1999 Institut National de Recherche en Informatique et    #
#   en Automatique.  All rights reserved.  This file is distributed     #
#   under the terms of the GNU Library General Public License, with     #
#   the special exception on linking described in file LICENSE.         #
#                                                                       #
#########################################################################

# $Id: configure 12645 2012-06-26 15:33:50Z doligez $

configure_options="$*"
prefix=/usr/local
bindir=''
libdir=''
mandir=''
manext=1
host_type=unknown
ccoption=''
asoption=''
asppoption=''
cclibs=''
curseslibs=''
mathlib='-lm'
dllib=''
x11_include_dir=''
x11_lib_dir=''
graph_wanted=yes
tk_wanted=yes
pthread_wanted=yes
tk_defs=''
tk_libs=''
tk_x11=yes
dl_defs=''
verbose=no
withcurses=yes
debugruntime=noruntimed
withsharedlibs=yes
gcc_warnings="-Wall"
partialld="ld -r"
withcamlp4=camlp4

# Try to turn internationalization off, can cause config.guess to malfunction!
unset LANG
unset LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES LC_MONETARY LC_NUMERIC LC_TIME

# Turn off some MacOS X debugging stuff, same reason
unset RC_TRACE_ARCHIVES RC_TRACE_DYLIBS RC_TRACE_PREBINDING_DISABLED

# Parse command-line arguments

while : ; do
  case "$1" in
    "") break;;
    -prefix|--prefix)
        prefix=$2; shift;;
    -bindir|--bindir)
        bindir=$2; shift;;
    -libdir|--libdir)
        libdir=$2; shift;;
    -mandir|--mandir)
        case "$2" in
          */man[1-9ln])
            mandir=`echo $2 | sed -e 's|^\(.*\)/man.$|\1|'`
            manext=`echo $2 | sed -e 's/^.*\(.\)$/\1/'`;;
          *)
            mandir=$2
            manext=1;;
        esac
        shift;;
    -host*|--host*)
        host_type=$2; shift;;
    -cc*)
        ccoption="$2"; shift;;
    -as)
        asoption="$2"; shift;;
    -aspp)
        asppoption="$2"; shift;;
    -lib*)
        cclibs="$2 $cclibs"; shift;;
    -no-curses|--no-curses)
        withcurses=no;;
    -no-shared-libs|--no-shared-libs)
        withsharedlibs=no;;
    -x11include*|--x11include*)
        x11_include_dir=$2; shift;;
    -x11lib*|--x11lib*)
        x11_lib_dir=$2; shift;;
    -no-graph|--no-graph) graph_wanted=no;;
    -with-pthread*|--with-pthread*)
        ;; # Ignored for backward compatibility
    -no-pthread*|--no-pthread*)
        pthread_wanted=no;;
    -no-tk|--no-tk)
        tk_wanted=no;;
    -partialld|--partialld)
        partialld="$2"; shift;;
    -tkdefs*|--tkdefs*)
        tk_defs=$2; shift;;
    -tklibs*|--tklibs*)
        tk_libs=$2; shift;;
    -tk-no-x11|--tk-no-x11)
        tk_x11=no;;
    -dldefs*|--dldefs*)
        dl_defs="$2"; shift;;
    -dllibs*|--dllibs*)
        dllib="$2"; shift;;
    -verbose|--verbose)
        verbose=yes;;
    -with-debug-runtime|--with-debug-runtime)
        debugruntime=runtimed;;
    -no-camlp4|--no-camlp4)
        withcamlp4="";;
    *) echo "Unknown option \"$1\"." 1>&2; exit 2;;
  esac
  shift
done

# Sanity checks

case "$prefix" in
  /*) ;;
   *) echo "The -prefix directory must be absolute." 1>&2; exit 2;;
esac
case "$bindir" in
  /*) ;;
  "") ;;
  '$(PREFIX)/'*) ;;
   *) echo 'The -bindir directory must be absolute or relative to $(PREFIX).'>&2
      exit 2;;
esac
case "$libdir" in
  /*) ;;
  "") ;;
  '$(PREFIX)/'*) ;;
   *) echo 'The -libdir directory must be absolute or relative to $(PREFIX).'>&2
      exit 2;;
esac
case "$mandir" in
  /*) ;;
  "") ;;
  '$(PREFIX)/'*) ;;
   *) echo 'The -mandir directory must be absolute or relative to $(PREFIX).'>&2
      exit 2;;
esac

# Generate the files

cd config/auto-aux
rm -f s.h m.h Makefile
touch s.h m.h Makefile

# Write options to Makefile

echo "# generated by ./configure $configure_options" >> Makefile

# Where to install

echo "PREFIX=$prefix" >> Makefile
case "$bindir" in
  "") echo 'BINDIR=$(PREFIX)/bin' >> Makefile
      bindir="$prefix/bin";;
   *) echo "BINDIR=$bindir" >> Makefile;;
esac
case "$libdir" in
  "") echo 'LIBDIR=$(PREFIX)/lib/ocaml' >> Makefile
      libdir="$prefix/lib/ocaml";;
   *) echo "LIBDIR=$libdir" >> Makefile;;
esac
echo 'STUBLIBDIR=$(LIBDIR)/stublibs' >> Makefile
case "$mandir" in
  "") echo 'MANDIR=$(PREFIX)/man' >> Makefile
      mandir="$prefix/man";;
   *) echo "MANDIR=$mandir" >> Makefile;;
esac
echo "MANEXT=$manext" >> Makefile

# Determine the system type

if test "$host_type" = "unknown"; then
  if host_type=`../gnu/config.guess`; then :; else
    echo "Cannot guess host type"
    echo "You must specify one with the -host option"
    exit 2
  fi
fi
if host=`../gnu/config.sub $host_type`; then :; else
  echo "Please specify the correct host type with the -host option"
  exit 2
fi
echo "Configuring for a $host ..."

# Do we have gcc?

if test -z "$ccoption"; then
  if sh ./searchpath gcc; then
    echo "gcc found"
    cc=gcc
  else
    cc=cc
  fi
else
  cc="$ccoption"
fi

# Check for buggy versions of GCC

buggycc="no"

case "$host,$cc" in
  i[3456]86-*-*,gcc*)
    case `$cc --version` in
      2.7.2.1) cat <<'EOF'

WARNING: you are using gcc version 2.7.2.1 on an Intel x86 processor.
This version of gcc is known to generate incorrect code for the
OCaml runtime system on some Intel x86 machines. (The symptom
is a crash of boot/ocamlc when compiling stdlib/pervasives.mli.)
In particular, the version of gcc 2.7.2.1 that comes with
Linux RedHat 4.x / Intel is affected by this problem.
Other Linux distributions might also be affected.
If you are using one of these configurations, you are strongly advised
to use another version of gcc, such as 2.95, which are
known to work well with OCaml.

Press <enter> to proceed or <interrupt> to stop.
EOF
        read reply;;
      2.96*) cat <<'EOF'

WARNING: you are using gcc version 2.96 on an Intel x86 processor.
Certain patched versions of gcc 2.96 are known to generate incorrect
code for the OCaml runtime system.  (The symptom is a segmentation
violation on boot/ocamlc.)  Those incorrectly patched versions can be found
in RedHat 7.2 and Mandrake 8.0 and 8.1; other Linux distributions
might also be affected.  (See bug #57760 on bugzilla.redhat.com)

Auto-configuration will now select gcc compiler flags that work around
the problem.  Still, if you observe segmentation faults while running
ocamlc or ocamlopt, you are advised to try another version of gcc,
such as 2.95.3 or 3.2.

EOF
        buggycc="gcc.2.96";;

            esac;;
esac

# Configure the bytecode compiler

bytecc="$cc"
mkexe="\$(BYTECC)"
mkexedebugflag="-g"
bytecccompopts=""
bytecclinkopts=""
dllccompopts=""
ostype="Unix"
exe=""
iflexdir=""

case "$bytecc,$host" in
  cc,*-*-nextstep*)
    # GNU C extensions disabled, but __GNUC__ still defined!
    bytecccompopts="-fno-defer-pop $gcc_warnings -U__GNUC__ -posix"
    bytecclinkopts="-posix";;
  *,*-*-rhapsody*)
    # Almost the same as NeXTStep
    bytecccompopts="-fno-defer-pop $gcc_warnings -DSHRINKED_GNUC"
    mathlib="";;
  *,*-*-darwin*)
    bytecccompopts="-fno-defer-pop $gcc_warnings"
    mathlib=""
    # Tell gcc that we can use 32-bit code addresses for threaded code
    # unless we are compiled for a shared library (-fPIC option)
    echo "#ifndef __PIC__" >> m.h
    echo "#  define ARCH_CODE32" >> m.h
    echo "#endif" >> m.h;;
  *,*-*-beos*)
    bytecccompopts="-fno-defer-pop $gcc_warnings"
    # No -lm library
    mathlib="";;
  gcc,alpha*-*-osf*)
    bytecccompopts="-fno-defer-pop $gcc_warnings"
    if cc="$bytecc" sh ./hasgot -mieee; then
      bytecccompopts="-mieee $bytecccompopts";
    fi
    # Put code and static data in lower 4GB
    bytecclinkopts="-Wl,-T,12000000 -Wl,-D,14000000"
    # Tell gcc that we can use 32-bit code addresses for threaded code
    echo "#define ARCH_CODE32" >> m.h;;
  cc,alpha*-*-osf*)
    bytecccompopts="-std1 -ieee";;
  gcc,alpha*-*-linux*)
    if cc="$bytecc" sh ./hasgot -mieee; then
      bytecccompopts="-mieee $bytecccompopts";
    fi;;
  cc,mips-*-irix6*)
    # Add -n32 flag to ensure compatibility with native-code compiler
    bytecccompopts="-n32"
    # Turn off warning "unused library"
    bytecclinkopts="-n32 -Wl,-woff,84";;
  cc*,mips-*-irix6*)
    # (For those who want to force "cc -64")
    # Turn off warning "unused library"
    bytecclinkopts="-Wl,-woff,84";;
  *,alpha*-*-unicos*)
    # For the Cray T3E
    bytecccompopts="-DUMK";;
  gcc*,powerpc-*-aix*)
    # Avoid name-space pollution by requiring Unix98-conformant includes
    bytecccompopts="-fno-defer-pop $gcc_warnings -D_XOPEN_SOURCE=500";;
  *,powerpc-*-aix*)
    bytecccompopts="-D_XOPEN_SOURCE=500";;
  gcc*,*-*-cygwin*)
    bytecccompopts="-fno-defer-pop $gcc_warnings -U_WIN32"
    dllccompopts="-U_WIN32 -DCAML_DLL"
    if test $withsharedlibs = yes; then
      flexlink="flexlink -chain cygwin -merge-manifest -stack 16777216"
      flexdir=`$flexlink -where | dos2unix`
      if test -z "$flexdir"; then
        echo "flexlink not found: native shared libraries won't be available"
        withsharedlibs=no
      else
        iflexdir="-I\"$flexdir\""
        mkexe="$flexlink -exe"
        mkexedebugflag="-link -g"
      fi
    fi
    exe=".exe"
    ostype="Cygwin";;
  gcc*,x86_64-*-linux*)
    bytecccompopts="-fno-defer-pop $gcc_warnings"
    # Tell gcc that we can use 32-bit code addresses for threaded code
    # unless we are compiled for a shared library (-fPIC option)
    echo "#ifndef __PIC__" >> m.h
    echo "#  define ARCH_CODE32" >> m.h
    echo "#endif" >> m.h;;
  gcc*)
    bytecccompopts="-fno-defer-pop $gcc_warnings";;
esac

# Configure compiler to use in further tests

cc="$bytecc -O $bytecclinkopts"
export cc cclibs verbose

# Check C compiler

sh ./runtest ansi.c
case $? in
  0) echo "The C compiler is ANSI-compliant.";;
  1) echo "The C compiler $cc is not ANSI-compliant."
     echo "You need an ANSI C compiler to build OCaml."
     exit 2;;
  *) echo "Unable to compile the test program."
     echo "Make sure the C compiler $cc is properly installed."
     exit 2;;
esac

# Check the sizes of data types

echo "Checking the sizes of integers and pointers..."
set `sh ./runtest sizes.c`
case "$2,$3" in
  4,4) echo "OK, this is a regular 32 bit architecture."
       echo "#undef ARCH_SIXTYFOUR" >> m.h
       arch64=false;;
  *,8) echo "Wow! A 64 bit architecture!"
       echo "#define ARCH_SIXTYFOUR" >> m.h
       arch64=true;;
  *,*) echo "This architecture seems to be neither 32 bits nor 64 bits."
       echo "OCaml won't run on this architecture."
       exit 2;;
    *) echo "Unable to compile the test program."
       echo "Make sure the C compiler $cc is properly installed."
       exit 2;;
esac
if test $1 != 4 && test $2 != 4 && test $4 != 4; then
  echo "Sorry, we can't find a 32-bit integer type"
  echo "(sizeof(short) = $4, sizeof(int) = $1, sizeof(long) = $2)"
  echo "OCaml won't run on this architecture."
  exit 2
fi

echo "#define SIZEOF_INT $1" >> m.h
echo "#define SIZEOF_LONG $2" >> m.h
echo "#define SIZEOF_PTR $3" >> m.h
echo "#define SIZEOF_SHORT $4" >> m.h

if test $2 = 8; then
     echo "#define ARCH_INT64_TYPE long" >> m.h
     echo "#define ARCH_UINT64_TYPE unsigned long" >> m.h
     echo '#define ARCH_INT64_PRINTF_FORMAT "l"' >> m.h
     int64_native=true
else
  sh ./runtest longlong.c
  case $? in
  0) echo "64-bit \"long long\" integer type found (printf with \"%ll\")."
     echo "#define ARCH_INT64_TYPE long long" >> m.h
     echo "#define ARCH_UINT64_TYPE unsigned long long" >> m.h
     echo '#define ARCH_INT64_PRINTF_FORMAT "ll"' >> m.h
     int64_native=true;;
  1) echo "64-bit \"long long\" integer type found (printf with \"%q\")."
     echo "#define ARCH_INT64_TYPE long long" >> m.h
     echo "#define ARCH_UINT64_TYPE unsigned long long" >> m.h
     echo '#define ARCH_INT64_PRINTF_FORMAT "q"' >> m.h
     int64_native=true;;
  2) echo "64-bit \"long long\" integer type found (but no printf)."
     echo "#define ARCH_INT64_TYPE long long" >> m.h
     echo "#define ARCH_UINT64_TYPE unsigned long long" >> m.h
     echo '#undef ARCH_INT64_PRINTF_FORMAT' >> m.h
     int64_native=true;;
  *) echo "No suitable 64-bit integer type found, will use software emulation."
     echo "#undef ARCH_INT64_TYPE" >> m.h
     echo "#undef ARCH_UINT64_TYPE" >> m.h
     echo '#undef ARCH_INT64_PRINTF_FORMAT' >> m.h
     int64_native=false;;
  esac
fi

if test $3 = 8 && test $int64_native = false; then
  echo "This architecture has 64-bit pointers but no 64-bit integer type."
  echo "OCaml won't run on this architecture."
  exit 2
fi

# Determine endianness

sh ./runtest endian.c
case $? in
  0) echo "This is a big-endian architecture."
     echo "#define ARCH_BIG_ENDIAN" >> m.h;;
  1) echo "This is a little-endian architecture."
     echo "#undef ARCH_BIG_ENDIAN" >> m.h;;
  2) echo "This architecture seems to be neither big endian nor little endian."
     echo "OCaml won't run on this architecture."
     exit 2;;
  *) echo "Something went wrong during endianness determination."
     echo "You'll have to figure out endianness yourself"
     echo "(option ARCH_BIG_ENDIAN in m.h).";;
esac

# Determine alignment constraints

case "$host" in
  sparc*-*-*|hppa*-*-*|arm*-*-*|mips*-*-*)
    # On Sparc V9 with certain versions of gcc, determination of double
    # alignment is not reliable (PR#1521), hence force it.
    # Same goes for hppa.
    # PR#5088 suggests same problem on ARM.
    # PR#5280 reports same problem on MIPS.
    # But there's a knack (PR#2572):
    # if we're in 64-bit mode (sizeof(long) == 8),
    # we must not doubleword-align floats...
    if test $2 = 8; then
      echo "Doubles can be word-aligned."
      echo "#undef ARCH_ALIGN_DOUBLE" >> m.h
    else
      echo "Doubles must be doubleword-aligned."
      echo "#define ARCH_ALIGN_DOUBLE" >> m.h
    fi;;
  *)
    sh ./runtest dblalign.c
    case $? in
      0) echo "Doubles can be word-aligned."
         echo "#undef ARCH_ALIGN_DOUBLE" >> m.h;;
      1) echo "Doubles must be doubleword-aligned."
         echo "#define ARCH_ALIGN_DOUBLE" >> m.h;;
      *) echo "Something went wrong during alignment determination for doubles."
         echo "I'm going to assume this architecture has alignment constraints over doubles."
         echo "That's a safe bet: OCaml will work even if"
         echo "this architecture has actually no alignment constraints."
         echo "#define ARCH_ALIGN_DOUBLE" >> m.h;;
    esac;;
esac

if $int64_native; then
  case "$host" in
    # PR#5088: autodetection is unreliable on ARM.  PR#5280: also on MIPS.
    sparc*-*-*|hppa*-*-*|arm*-*-*|mips*-*-*)
      if test $2 = 8; then
        echo "64-bit integers can be word-aligned."
        echo "#undef ARCH_ALIGN_INT64" >> m.h
      else
        echo "64-bit integers must be doubleword-aligned."
        echo "#define ARCH_ALIGN_INT64" >> m.h
      fi;;
    *)
      sh ./runtest int64align.c
      case $? in
        0) echo "64-bit integers can be word-aligned."
           echo "#undef ARCH_ALIGN_INT64" >> m.h;;
        1) echo "64-bit integers must be doubleword-aligned."
           echo "#define ARCH_ALIGN_INT64" >> m.h;;
        *) echo "Something went wrong during alignment determination for 64-bit integers."
           echo "I'm going to assume this architecture has alignment constraints."
           echo "That's a safe bet: OCaml will work even if"
           echo "this architecture has actually no alignment constraints."
           echo "#define ARCH_ALIGN_INT64" >> m.h;;
      esac
  esac
else
  echo "#undef ARCH_ALIGN_INT64" >> m.h
fi

# Check semantics of division and modulus

sh ./runtest divmod.c
case $? in
  0) echo "Native division and modulus have round-towards-zero semantics, will use them."
     echo "#undef NONSTANDARD_DIV_MOD" >> m.h;;
  1) echo "Native division and modulus do not have round-towards-zero semantics, will use software emulation."
     echo "#define NONSTANDARD_DIV_MOD" >> m.h;;
  *) echo "Something went wrong while checking native division and modulus, please report it."
     echo "#define NONSTANDARD_DIV_MOD" >> m.h;;
esac

# Shared library support

shared_libraries_supported=false
dl_needs_underscore=false
sharedcccompopts=''
mksharedlib=''
byteccrpath=''
mksharedlibrpath=''
natdynlinkopts=""

if test $withsharedlibs = "yes"; then
  case "$host" in
    *-*-cygwin*)
      mksharedlib="$flexlink"
      mkmaindll="$flexlink -maindll"
      shared_libraries_supported=true;;
    *-*-linux-gnu|*-*-linux|*-*-freebsd[3-9]*|*-*-openbsd*|*-*-netbsd*|*-*-gnu*)
      sharedcccompopts="-fPIC"
      mksharedlib="$bytecc -shared"
      bytecclinkopts="$bytecclinkopts -Wl,-E"
      byteccrpath="-Wl,-rpath,"
      mksharedlibrpath="-Wl,-rpath,"
      natdynlinkopts="-Wl,-E"
      shared_libraries_supported=true;;
    alpha*-*-osf*)
      case "$bytecc" in
        gcc*)
          sharedcccompopts="-fPIC"
          mksharedlib="$bytecc -shared"
          byteccrpath="-Wl,-rpath,"
          mksharedlibrpath="-Wl,-rpath,"
          shared_libraries_supported=true;;
        cc*)
          sharedcccompopts=""
          mksharedlib="ld -shared -expect_unresolved '*'"
          byteccrpath="-Wl,-rpath,"
          mksharedlibrpath="-rpath "
          shared_libraries_supported=true;;
      esac;;
    *-*-solaris2*)
      case "$bytecc" in
        gcc*)
          sharedcccompopts="-fPIC"
          if sh ./solaris-ld; then
            mksharedlib="$bytecc -shared"
            byteccrpath="-R"
            mksharedlibrpath="-R"
          else
            mksharedlib="$bytecc -shared"
            bytecclinkopts="$bytecclinkopts -Wl,-E"
            natdynlinkopts="-Wl,-E"
            byteccrpath="-Wl,-rpath,"
            mksharedlibrpath="-Wl,-rpath,"
          fi
          shared_libraries_supported=true;;
        *)
          sharedcccompopts="-KPIC"
          byteccrpath="-R"
          mksharedlibrpath="-R"
          mksharedlib="/usr/ccs/bin/ld -G"
          shared_libraries_supported=true;;
      esac;;
    mips*-*-irix[56]*)
      case "$bytecc" in
        cc*) sharedcccompopts="";;
        gcc*) sharedcccompopts="-fPIC";;
      esac
      mksharedlib="ld -shared -rdata_shared"
      byteccrpath="-Wl,-rpath,"
      mksharedlibrpath="-rpath "
      shared_libraries_supported=true;;
    i[3456]86-*-darwin[89].*)
      mksharedlib="$bytecc -bundle -flat_namespace -undefined suppress -read_only_relocs suppress"
      bytecccompopts="$dl_defs $bytecccompopts"
      dl_needs_underscore=false
      shared_libraries_supported=true;;
    *-apple-darwin*)
      mksharedlib="$bytecc -bundle -flat_namespace -undefined suppress"
      bytecccompopts="$dl_defs $bytecccompopts"
      dl_needs_underscore=false
      shared_libraries_supported=true;;
    m88k-*-openbsd*)
      shared_libraries_supported=false;;
    vax-*-openbsd*)
      shared_libraries_supported=false;;
    *-*-openbsd*)
      sharedcccompopts="-fPIC"
      mksharedlib="$bytecc -shared"
      bytecclinkopts="$bytecclinkopts -Wl,-E"
      natdynlinkopts="-Wl,-E"
      byteccrpath="-Wl,-rpath,"
      mksharedlibrpath="-Wl,-rpath,"
      shared_libraries_supported=true;;
  esac
fi

if test -z "$mkmaindll"; then
  mkmaindll=$mksharedlib
fi

# Configure native dynlink

natdynlink=false

if test $withsharedlibs = "yes"; then
  case "$host" in
    *-*-cygwin*)                  natdynlink=true;;
    i[3456]86-*-linux*)           natdynlink=true;;
    i[3456]86-*-gnu*)             natdynlink=true;;
    x86_64-*-linux*)              natdynlink=true;;
    i[3456]86-*-darwin[89].*)     natdynlink=true;;
    i[3456]86-*-darwin*)
      if test $arch64 == true; then
        natdynlink=true
      fi;;
    x86_64-*-darwin*)             natdynlink=true;;
    powerpc*-*-linux*)            natdynlink=true;;
    sparc*-*-linux*)              natdynlink=true;;
    i686-*-kfreebsd*)             natdynlink=true;;
    x86_64-*-kfreebsd*)           natdynlink=true;;
    i[345]86-*-freebsd*)          natdynlink=true;;
    x86_64-*-freebsd*)            natdynlink=true;;
    i[345]86-*-openbsd*)          natdynlink=true;;
    x86_64-*-openbsd*)            natdynlink=true;;
    i[345]86-*-netbsd*)           natdynlink=true;;
    x86_64-*-netbsd*)             natdynlink=true;;
    i386-*-gnu0.3)                natdynlink=true;;
    arm*-*-linux*)                natdynlink=true;;
  esac
fi

if test $natdynlink = "true"; then
  cmxs="cmxs"
else
  cmxs="cmxa"
fi


# Configure the native-code compiler

arch=none
model=default
system=unknown

case "$host" in
  sparc*-*-solaris2.*)          arch=sparc; system=solaris;;
  sparc*-*-*bsd*)               arch=sparc; system=bsd;;
  sparc*-*-linux*)              arch=sparc; system=linux;;
  sparc*-*-gnu*)                arch=sparc; system=gnu;;
  i[3456]86-*-linux*)           arch=i386; system=linux_`sh ./runtest elf.c`;;
  i[3456]86-*-*bsd*)            arch=i386; system=bsd_`sh ./runtest elf.c`;;
  i[3456]86-*-nextstep*)        arch=i386; system=nextstep;;
  i[3456]86-*-solaris*)         if $arch64; then
                                  arch=amd64; system=solaris
                                else
                                  arch=i386; system=solaris
                                fi;;
  i[3456]86-*-beos*)            arch=i386; system=beos;;
  i[3456]86-*-cygwin*)          arch=i386; system=cygwin;;
  i[3456]86-*-darwin*)          if $arch64; then
                                  arch=amd64; system=macosx
                                else
                                  arch=i386; system=macosx
                                fi;;
  i[3456]86-*-gnu*)             arch=i386; system=gnu;;
  powerpc*-*-linux*)            arch=power; model=ppc; system=elf;;
  powerpc-*-netbsd*)            arch=power; model=ppc; system=elf;;
  powerpc-*-rhapsody*)          arch=power; model=ppc; system=rhapsody;;
  powerpc-*-darwin*)            arch=power; system=rhapsody
                                if $arch64; then model=ppc64; else model=ppc; fi;;
  arm*-*-linux-gnueabihf)       arch=arm; system=linux_eabihf;;
  armv7*-*-linux-gnueabi)       arch=arm; model=armv7; system=linux_eabi;;
  armv6t2*-*-linux-gnueabi)     arch=arm; model=armv6t2; system=linux_eabi;;
  armv6*-*-linux-gnueabi)       arch=arm; model=armv6; system=linux_eabi;;
  armv5te*-*-linux-gnueabi)     arch=arm; model=armv5te; system=linux_eabi;;
  armv5*-*-linux-gnueabi)       arch=arm; model=armv5; system=linux_eabi;;
  arm*-*-linux-gnueabi)         arch=arm; system=linux_eabi;;
  x86_64-*-linux*)              arch=amd64; system=linux;;
  x86_64-*-gnu*)                arch=amd64; system=gnu;;
  x86_64-*-freebsd*)            arch=amd64; system=freebsd;;
  x86_64-*-netbsd*)             arch=amd64; system=netbsd;;
  x86_64-*-openbsd*)            arch=amd64; system=openbsd;;
  x86_64-*-darwin*)             arch=amd64; system=macosx;;
esac

# Some platforms exist both in 32-bit and 64-bit variants, not distinguished
# by $host.  Turn off native code compilation on platforms where 64-bit mode
# is not supported.  (PR#4441)

if $arch64; then
  case "$arch,$model" in
    sparc,default|power,ppc)
      arch=none; model=default; system=unknown;;
  esac
fi

if test -z "$ccoption"; then
  nativecc="$bytecc"
else
  nativecc="$ccoption"
fi

nativecccompopts=''
nativecclinkopts=''
nativeccrpath="$byteccrpath"

case "$arch,$nativecc,$system,$host_type" in
  *,*,nextstep,*)      nativecccompopts="$gcc_warnings -U__GNUC__ -posix"
                       nativecclinkopts="-posix";;
  *,*,rhapsody,*darwin[1-5].*)
                       nativecccompopts="$gcc_warnings -DSHRINKED_GNUC";;
  *,*,rhapsody,*)      nativecccompopts="$gcc_warnings -DDARWIN_VERSION_6 $dl_defs"
                       if $arch64; then partialld="ld -r -arch ppc64"; fi;;
  *,gcc*,cygwin,*)     nativecccompopts="$gcc_warnings -U_WIN32";;
  amd64,gcc*,macosx,*) partialld="ld -r -arch x86_64";;
  amd64,gcc*,solaris,*) partialld="ld -r -m elf_x86_64";;
  *,gcc*,*,*)          nativecccompopts="$gcc_warnings";;
esac

asppprofflags='-DPROFILING'

case "$arch,$model,$system" in
  amd64,*,macosx)   as='as -arch x86_64'
                    aspp='gcc -arch x86_64 -c';;
  amd64,*,solaris)  as='as --64'
                    aspp='gcc -m64 -c';;
  amd64,*,*)        as='as'
                    aspp='gcc -c';;
  arm,*,*)          as='as';
                    aspp='gcc -c';;
  i386,*,solaris)   as='as'
                    aspp='/usr/ccs/bin/as -P';;
  i386,*,*)         as='as'
                    aspp='gcc -c';;
  power,*,elf)      as='as -u -m ppc'
                    aspp='gcc -c';;
  power,*,bsd)      as='as'
                    aspp='gcc -c';;
  power,*,rhapsody) as="as -arch $model"
                    aspp="$bytecc -c";;
  sparc,*,solaris)  as='as'
                    case "$cc" in
                      gcc*) aspp='gcc -c';;
                         *) aspp='as -P';;
                    esac;;
  sparc,*,*)        as='as'
                    aspp='gcc -c';;
esac

if test -n "$asoption"; then as="$asoption"; fi
if test -n "$asppoption"; then aspp="$asppoption"; fi

cc_profile='-pg'
case "$arch,$model,$system" in
  i386,*,linux_elf) profiling='prof';;
  i386,*,gnu) profiling='prof';;
  i386,*,bsd_elf) profiling='prof';;
  amd64,*,macosx) profiling='prof';;
  i386,*,macosx) profiling='prof';;
  sparc,*,solaris)
    profiling='prof'
    case "$nativecc" in gcc*) ;; *) cc_profile='-xpg';; esac;;
  amd64,*,linux) profiling='prof';;
  amd64,*,gnu) profiling='prof';;
  arm,*,linux*) profiling='prof';;
  *) profiling='noprof';;
esac

# Where is ranlib?

if sh ./searchpath ranlib; then
  echo "ranlib found"
  echo "RANLIB=ranlib" >> Makefile
  echo "RANLIBCMD=ranlib" >> Makefile
else
  echo "ranlib not used"
  echo "RANLIB=ar rs" >> Makefile
  echo "RANLIBCMD=" >> Makefile
fi

echo "ARCMD=ar" >> Makefile


# Do #! scripts work?

if (SHELL=/bin/sh; export SHELL; (./sharpbang || ./sharpbang2) >/dev/null); then
  echo "#! appears to work in shell scripts"
  case "$host" in
    *-*-sunos*|*-*-unicos*)
      echo "We won't use it, though, because under SunOS and Unicos it breaks"
      echo "on pathnames longer than 30 characters"
      echo "SHARPBANGSCRIPTS=false" >> Makefile;;
    *-*-cygwin*)
      echo "We won't use it, though, because of conflicts with .exe extension"
      echo "under Cygwin"
      echo "SHARPBANGSCRIPTS=false" >> Makefile;;
    *)
      echo "SHARPBANGSCRIPTS=true" >> Makefile;;
  esac
else
  echo "No support for #! in shell scripts"
  echo "SHARPBANGSCRIPTS=false" >> Makefile
fi

# Write the OS type (Unix or Cygwin)

echo "#define OCAML_OS_TYPE \"$ostype\"" >> s.h
echo "#define OCAML_STDLIB_DIR \"$libdir\"" >> s.h

# Use 64-bit file offset if possible

bytecccompopts="$bytecccompopts -D_FILE_OFFSET_BITS=64"
nativecccompopts="$nativecccompopts -D_FILE_OFFSET_BITS=64"

# Check the semantics of signal handlers

if sh ./hasgot sigaction sigprocmask; then
  echo "POSIX signal handling found."
  echo "#define POSIX_SIGNALS" >> s.h
else
  if sh ./runtest signals.c; then
    echo "Signals have the BSD semantics."
    echo "#define BSD_SIGNALS" >> s.h
  else
    echo "Signals have the System V semantics."
  fi
  if sh ./hasgot sigsetmask; then
    echo "sigsetmask() found"
    echo "#define HAS_SIGSETMASK" >> s.h
  fi
fi

# For the Pervasives module

if sh ./hasgot2 -i math.h $mathlib expm1 log1p hypot copysign; then
  echo "expm1(), log1p(), hypot(), copysign() found."
  echo "#define HAS_C99_FLOAT_OPS" >> s.h
fi

# For the Sys module

if sh ./hasgot getrusage; then
  echo "getrusage() found."
  echo "#define HAS_GETRUSAGE" >> s.h
fi

if sh ./hasgot times; then
  echo "times() found."
  echo "#define HAS_TIMES" >> s.h
fi

# For the terminfo module

if test "$withcurses" = "yes"; then
  for libs in "" "-lcurses" "-ltermcap" "-lcurses -ltermcap" "-lncurses"; do
    if sh ./hasgot $libs tgetent tgetstr tgetnum tputs; then
      echo "termcap functions found (with libraries '$libs')"
      echo "#define HAS_TERMCAP" >> s.h
      curseslibs="${libs}"
      break
    fi
  done
fi

# Configuration for the libraries

otherlibraries="unix str num dynlink bigarray"

# For the Unix library

has_sockets=no
if sh ./hasgot socket socketpair bind listen accept connect; then
  echo "You have BSD sockets."
  echo "#define HAS_SOCKETS" >> s.h
  has_sockets=yes
elif sh ./hasgot -lnsl -lsocket socket socketpair bind listen accept connect; then
  echo "You have BSD sockets (with libraries '-lnsl -lsocket')"
  cclibs="$cclibs -lnsl -lsocket"
  echo "#define HAS_SOCKETS" >> s.h
  has_sockets=yes
fi

if sh ./hasgot -i sys/socket.h -t socklen_t; then
  echo "socklen_t is defined in <sys/socket.h>"
  echo "#define HAS_SOCKLEN_T" >> s.h
fi

if sh ./hasgot inet_aton; then
  echo "inet_aton() found."
  echo "#define HAS_INET_ATON" >> s.h
fi

if sh ./hasgot -i sys/types.h -i sys/socket.h -i netinet/in.h \
               -t 'struct sockaddr_in6' \
&& sh ./hasgot getaddrinfo getnameinfo inet_pton inet_ntop; then
  echo "IPv6 is supported."
  echo "#define HAS_IPV6" >> s.h
fi

if sh ./hasgot -i unistd.h; then
  echo "unistd.h found."
  echo "#define HAS_UNISTD" >> s.h
fi

if sh ./hasgot -i sys/types.h -t off_t; then
  echo "off_t is defined in <sys/types.h>"
  echo "#define HAS_OFF_T" >> s.h
fi

if sh ./hasgot -i sys/types.h -i dirent.h; then
  echo "dirent.h found."
  echo "#define HAS_DIRENT" >> s.h
fi

if sh ./hasgot rewinddir; then
  echo "rewinddir() found."
  echo "#define HAS_REWINDDIR" >> s.h
fi

if sh ./hasgot lockf; then
  echo "lockf() found."
  echo "#define HAS_LOCKF" >> s.h
fi

if sh ./hasgot mkfifo; then
  echo "mkfifo() found."
  echo "#define HAS_MKFIFO" >> s.h
fi

if sh ./hasgot getcwd; then
  echo "getcwd() found."
  echo "#define HAS_GETCWD" >> s.h
fi

if sh ./hasgot getwd; then
  echo "getwd() found."
  echo "#define HAS_GETWD" >> s.h
fi

if sh ./hasgot getpriority setpriority; then
  echo "getpriority() found."
  echo "#define HAS_GETPRIORITY" >> s.h
fi

if sh ./hasgot -i sys/types.h -i utime.h && sh ./hasgot utime; then
  echo "utime() found."
  echo "#define HAS_UTIME" >> s.h
fi

if sh ./hasgot utimes; then
  echo "utimes() found."
  echo "#define HAS_UTIMES" >> s.h
fi

if sh ./hasgot dup2; then
  echo "dup2() found."
  echo "#define HAS_DUP2" >> s.h
fi

if sh ./hasgot fchmod fchown; then
  echo "fchmod() found."
  echo "#define HAS_FCHMOD" >> s.h
fi

if sh ./hasgot truncate ftruncate; then
  echo "truncate() found."
  echo "#define HAS_TRUNCATE" >> s.h
fi

select_include=''
if sh ./hasgot -i sys/types.h -i sys/select.h; then
  echo "sys/select.h found."
  echo "#define HAS_SYS_SELECT_H" >> s.h
  select_include='-i sys/select.h'
fi

has_select=no
if sh ./hasgot select && \
   sh ./hasgot -i sys/types.h $select_include -t fd_set ; then
  echo "select() found."
  echo "#define HAS_SELECT" >> s.h
  has_select=yes
fi

if sh ./hasgot symlink readlink lstat;  then
  echo "symlink() found."
  echo "#define HAS_SYMLINK" >> s.h
fi

has_wait=no
if sh ./hasgot waitpid;  then
  echo "waitpid() found."
  echo "#define HAS_WAITPID" >> s.h
  has_wait=yes
fi

if sh ./hasgot wait4;  then
  echo "wait4() found."
  echo "#define HAS_WAIT4" >> s.h
  has_wait=yes
fi

if sh ./hasgot -i limits.h && sh ./runtest getgroups.c; then
  echo "getgroups() found."
  echo "#define HAS_GETGROUPS" >> s.h
fi

if sh ./hasgot -i limits.h -i grp.h && sh ./runtest setgroups.c; then
  echo "setgroups() found."
  echo "#define HAS_SETGROUPS" >> s.h
fi

if sh ./hasgot -i limits.h -i grp.h && sh ./runtest initgroups.c; then
  echo "initgroups() found."
  echo "#define HAS_INITGROUPS" >> s.h
fi

if sh ./hasgot -i termios.h &&
   sh ./hasgot tcgetattr tcsetattr tcsendbreak tcflush tcflow; then
  echo "POSIX termios found."
  echo "#define HAS_TERMIOS" >> s.h
fi

if sh ./runtest async_io.c; then
  echo "Asynchronous I/O are supported."
  echo "#define HAS_ASYNC_IO" >> s.h
fi

has_setitimer=no
if sh ./hasgot setitimer; then
  echo "setitimer() found."
  echo "#define HAS_SETITIMER" >> s.h
  has_setitimer="yes"
fi

if sh ./hasgot gethostname; then
  echo "gethostname() found."
  echo "#define HAS_GETHOSTNAME" >> s.h
fi

if sh ./hasgot -i sys/utsname.h && sh ./hasgot uname; then
  echo "uname() found."
  echo "#define HAS_UNAME" >> s.h
fi

has_gettimeofday=no
if sh ./hasgot gettimeofday; then
  echo "gettimeofday() found."
  echo "#define HAS_GETTIMEOFDAY" >> s.h
  has_gettimeofday="yes"
fi

if sh ./hasgot mktime; then
  echo "mktime() found."
  echo "#define HAS_MKTIME" >> s.h
fi

case "$host" in
  *-*-cygwin*) ;;  # setsid emulation under Cygwin breaks the debugger
  *) if sh ./hasgot setsid; then
       echo "setsid() found."
       echo "#define HAS_SETSID" >> s.h
     fi;;
esac

if sh ./hasgot putenv; then
  echo "putenv() found."
  echo "#define HAS_PUTENV" >> s.h
fi

if sh ./hasgot -i locale.h && sh ./hasgot setlocale; then
  echo "setlocale() and <locale.h> found."
  echo "#define HAS_LOCALE" >> s.h
fi


if sh ./hasgot $dllib dlopen; then
  echo "dlopen() found."
elif sh ./hasgot $dllib -ldl dlopen; then
  echo "dlopen() found in -ldl."
  dllib="$dllib -ldl"
else
  shared_libraries_supported=false
fi

if $shared_libraries_supported; then
  echo "Dynamic loading of shared libraries is supported."
  echo "#define SUPPORT_DYNAMIC_LINKING" >> s.h
  if $dl_needs_underscore; then
    echo '#define DL_NEEDS_UNDERSCORE' >>s.h
  fi
fi

if sh ./hasgot -i sys/types.h -i sys/mman.h && sh ./hasgot mmap munmap; then
  echo "mmap() found."
  echo "#define HAS_MMAP" >> s.h
fi

if sh ./hasgot pwrite; then
  echo "pwrite() found"
  echo "#define HAS_PWRITE" >> s.h
fi

nargs=none
for i in 5 6; do
  if sh ./trycompile -DNUM_ARGS=${i} gethostbyname.c; then nargs=$i; break; fi
done
if test $nargs != "none"; then
  echo "gethostbyname_r() found (with ${nargs} arguments)."
  echo "#define HAS_GETHOSTBYNAME_R $nargs" >> s.h
fi

nargs=none
for i in 7 8; do
  if sh ./trycompile -DNUM_ARGS=${i} gethostbyaddr.c; then nargs=$i; break; fi
done
if test $nargs != "none"; then
  echo "gethostbyaddr_r() found (with ${nargs} arguments)."
  echo "#define HAS_GETHOSTBYADDR_R $nargs" >> s.h
fi

# Determine if the debugger is supported

if test "$has_sockets" = "yes"; then
  echo "Replay debugger supported."
  debugger="ocamldebugger"
else
  echo "No replay debugger (missing system calls)"
  debugger=""
fi


# Determine if system stack overflows can be detected

case "$arch,$system" in
  i386,linux_elf|amd64,linux|power,rhapsody|amd64,macosx|i386,macosx)
    echo "System stack overflow can be detected."
    echo "#define HAS_STACK_OVERFLOW_DETECTION" >> s.h;;
  *)
    echo "Cannot detect system stack overflow.";;
esac

# Determine the target architecture for the "num" library

case "$arch" in
  i386)     bng_arch=ia32
            if sh ./trycompile ia32sse2.c
            then bng_asm_level=2
            else bng_asm_level=1
            fi;;
  power)    bng_arch=ppc; bng_asm_level=1;;
  amd64)    bng_arch=amd64; bng_asm_level=1;;
  *)        bng_arch=generic; bng_asm_level=0;;
esac

echo "BNG_ARCH=$bng_arch" >> Makefile
echo "BNG_ASM_LEVEL=$bng_asm_level" >> Makefile

# Determine if the POSIX threads library is supported

systhread_support=false

if test "$pthread_wanted" = "yes"; then
  case "$host" in
    *-*-solaris*)  pthread_link="-lpthread -lposix4"
                   pthread_caml_link="-cclib -lpthread -cclib -lposix4";;
    *-*-freebsd*)  pthread_link="-pthread"
                   pthread_caml_link="-cclib -pthread";;
    *-*-openbsd*)  pthread_link="-pthread"
                   pthread_caml_link="-cclib -pthread";;
    *)             pthread_link="-lpthread"
                   pthread_caml_link="-cclib -lpthread";;
  esac
  if ./hasgot -i pthread.h $pthread_link pthread_self; then
    echo "POSIX threads library supported."
    systhread_support=true
    otherlibraries="$otherlibraries systhreads"
    bytecccompopts="$bytecccompopts -D_REENTRANT"
    nativecccompopts="$nativecccompopts -D_REENTRANT"
    case "$host" in
      *-*-freebsd*)
          bytecccompopts="$bytecccompopts -D_THREAD_SAFE"
          nativecccompopts="$nativecccompopts -D_THREAD_SAFE";;
      *-*-openbsd*)
          bytecccompopts="$bytecccompopts -pthread"
          asppflags="$asppflags -pthread"
          nativecccompopts="$nativecccompopts -pthread";;
    esac
    echo "Options for linking with POSIX threads: $pthread_link"
    if sh ./hasgot $pthread_link sigwait; then
      echo "sigwait() found"
      echo "#define HAS_SIGWAIT" >> s.h
    fi
  else
    echo "POSIX threads not found."
    pthread_link=""
  fi
else
  pthread_link=""
fi
echo "PTHREAD_LINK=$pthread_caml_link" >> Makefile

# Determine if the bytecode thread library is supported

if test "$has_select" = "yes" \
&& test "$has_setitimer" = "yes" \
&& test "$has_gettimeofday" = "yes" \
&& test "$has_wait" = "yes"; then
  echo "Bytecode threads library supported."
  otherlibraries="$otherlibraries threads"
else
  echo "Bytecode threads library not supported (missing system calls)"
fi

# Determine the location of X include files and libraries

# If the user specified -x11include and/or -x11lib, these settings
# are used. Otherwise, we check whether there is pkg-config, and take
# the flags from there. Otherwise, we search the location.

x11_include="not found"
x11_link="not found"

if test -z "$x11_include_dir" -a -z "$x11_lib_dir"; then
  if pkg-config --exists x11 2>/dev/null; then
    x11_include=`pkg-config --cflags x11`
    x11_link=`pkg-config --libs x11`
  fi
fi

if test "$x11_include" = "not found"; then
  for dir in \
    $x11_include_dir          \
                              \
    /usr/X11R7/include        \
    /usr/include/X11R7        \
    /usr/local/X11R7/include  \
    /usr/local/include/X11R7  \
    /opt/X11R7/include        \
                              \
    /usr/X11R6/include        \
    /usr/include/X11R6        \
    /usr/local/X11R6/include  \
    /usr/local/include/X11R6  \
    /opt/X11R6/include        \
                              \
    /usr/X11/include          \
    /usr/include/X11          \
    /usr/local/X11/include    \
    /usr/local/include/X11    \
    /opt/X11/include          \
                              \
    /usr/X11R5/include        \
    /usr/include/X11R5        \
    /usr/local/X11R5/include  \
    /usr/local/include/X11R5  \
    /usr/local/x11r5/include  \
    /opt/X11R5/include        \
                              \
    /usr/X11R4/include        \
    /usr/include/X11R4        \
    /usr/local/X11R4/include  \
    /usr/local/include/X11R4  \
                              \
    /usr/X386/include         \
    /usr/x386/include         \
    /usr/XFree86/include/X11  \
                              \
    /usr/include              \
    /usr/local/include        \
    /usr/unsupported/include  \
    /usr/athena/include       \
    /usr/lpp/Xamples/include  \
                              \
    /usr/openwin/include      \
    /usr/openwin/share/include \
    ; \
    do
    if test -f $dir/X11/X.h; then
      x11_include_dir=$dir
      x11_include="-I$dir"
      break
    fi
  done

  if test "$x11_include" = "not found"; then
      x11_try_lib_dir=''
  else
      x11_try_lib_dir=`echo $x11_include_dir | sed -e 's|include|lib|'`
  fi

  for dir in \
    $x11_lib_dir          \
    $x11_try_lib_dir      \
                          \
    /usr/X11R6/lib64      \
    /usr/X11R6/lib        \
    /usr/lib/X11R6        \
    /usr/local/X11R6/lib  \
    /usr/local/lib/X11R6  \
    /opt/X11R6/lib        \
                          \
    /usr/X11/lib          \
    /usr/lib/X11          \
    /usr/local/X11/lib    \
    /usr/local/lib/X11    \
    /opt/X11/lib          \
                          \
    /usr/X11R5/lib        \
    /usr/lib/X11R5        \
    /usr/local/X11R5/lib  \
    /usr/local/lib/X11R5  \
    /usr/local/x11r5/lib  \
    /opt/X11R5/lib        \
                          \
    /usr/X11R4/lib        \
    /usr/lib/X11R4        \
    /usr/local/X11R4/lib  \
    /usr/local/lib/X11R4  \
                          \
    /usr/X386/lib         \
    /usr/x386/lib         \
    /usr/XFree86/lib/X11  \
                          \
    /usr/lib64            \
    /usr/lib              \
    /usr/local/lib        \
    /usr/unsupported/lib  \
    /usr/athena/lib       \
    /usr/lpp/Xamples/lib  \
    /lib/usr/lib/X11      \
                          \
    /usr/openwin/lib      \
    /usr/openwin/share/lib    \
                              \
    /usr/lib/i386-linux-gnu   \
    /usr/lib/x86_64-linux-gnu \
    ; \
    do
    if test -f $dir/libX11.a || \
       test -f $dir/libX11.so || \
       test -f $dir/libX11.dll.a || \
       test -f $dir/libX11.dylib || \
       test -f $dir/libX11.sa; then
      if test $dir = /usr/lib; then
        x11_link="-lX11"
      else
        x11_libs="-L$dir"
        case "$host" in
          *-kfreebsd*-gnu) x11_link="-L$dir -lX11";;
          *-*-*bsd*) x11_link="-R$dir -L$dir -lX11";;
          *) x11_link="-L$dir -lX11";;
        esac
      fi
      break
    fi
  done
fi

if test "x11_include" != "not found"; then
  if test "$x11_include" = "-I/usr/include"; then
    x11_include=""
  fi
  if ./hasgot $x11_include $x11_link -i X11/Xlib.h XrmInitialize; then
    echo "X11 works"
  else
    echo "Cannot compile X11 program"
    x11_include="not found"
  fi
fi

has_graph=false
if test "$x11_include" = "not found" || test "$x11_link" = "not found"
then
  echo "X11 not found, the \"graph\" library will not be supported."
  x11_include="not found"
  x11_link="not found"
else
  echo "Options for compiling for X11: $x11_include"
  echo "Options for linking with X11: $x11_link"
  if test "$graph_wanted" = yes
  then
    has_graph=true
    otherlibraries="$otherlibraries graph"
  fi
fi
echo "X11_INCLUDES=$x11_include" >> Makefile
echo "X11_LINK=$x11_link" >> Makefile

# Look for tcl/tk

echo "Configuring LablTk..."

if test $tk_wanted = no; then
  has_tk=false
elif test $tk_x11 = no; then
  has_tk=true
elif test "$x11_include" = "not found" || test "$x11_link" = "not found"; then
  echo "X11 not found or disabled."
  has_tk=false
else
  tk_x11_include="$x11_include"
  tk_x11_libs="$x11_link"
  has_tk=true
fi

if test $has_tk = true; then
  tcl_version=''
  tcl_version=`sh ./runtest $tk_defs $tk_x11_include tclversion.c`
  for tk_incs in \
    "-I/usr/local/include" \
    "-I/usr/include" \
    "-I/usr/local/include/tcl8.5 -I/usr/local/include/tk8.5" \
    "-I/usr/include/tcl8.5 -I/usr/include/tk8.5" \
    "-I/usr/local/include/tcl8.4 -I/usr/local/include/tk8.4" \
    "-I/usr/include/tcl8.4 -I/usr/include/tk8.4" \
    "-I/usr/local/include/tcl8.3 -I/usr/local/include/tk8.3" \
    "-I/usr/include/tcl8.3 -I/usr/include/tk8.3" \
    "-I/usr/local/include/tcl8.2 -I/usr/local/include/tk8.2" \
    "-I/usr/include/tcl8.2 -I/usr/include/tk8.2" \
    "-I/sw/include" \
    "-I/usr/pkg/include"
  do if test -z "$tcl_version"; then
    tk_defs="$tk_incs"
    tcl_version=`sh ./runtest $tk_defs $tk_x11_include tclversion.c`
  fi; done
  if test -n "$tcl_version" && test "x$tcl_version" != "xnone"; then
    echo "tcl.h and tk.h version $tcl_version found with \"$tk_defs\"."
    case $tcl_version in
    8.5) tclmaj=8 tclmin=5 tkmaj=8 tkmin=5 ;;
    8.4) tclmaj=8 tclmin=4 tkmaj=8 tkmin=4 ;;
    8.3) tclmaj=8 tclmin=3 tkmaj=8 tkmin=3 ;;
    8.2) tclmaj=8 tclmin=2 tkmaj=8 tkmin=2 ;;
    8.1) tclmaj=8 tclmin=1 tkmaj=8 tkmin=1 ;;
    8.0) tclmaj=8 tclmin=0 tkmaj=8 tkmin=0 ;;
    7.6) tclmaj=7 tclmin=6 tkmaj=4 tkmin=2 ;;
    7.5) tclmaj=7 tclmin=5 tkmaj=4 tkmin=1 ;;
    *) echo "This version is not known."; has_tk=false ;;
    esac
  else
    echo "tcl.h and/or tk.h not found."
    has_tk=false
  fi
fi

tkauxlibs="$mathlib $dllib"
tcllib=''
tklib=''
if test $has_tk = true; then
  if test -n "$tk_libs" && \
     sh ./hasgot $tk_libs $tk_x11_libs $tkauxlibs Tcl_DoOneEvent
  then tk_libs="$tk_libs $dllib"
  elif sh ./hasgot $tk_libs -ltcl$tclmaj.$tclmin $tkauxlibs Tcl_DoOneEvent
  then
    tk_libs="$tk_libs -ltk$tkmaj.$tkmin -ltcl$tclmaj.$tclmin $dllib"
  elif sh ./hasgot $tk_libs -ltcl$tclmaj$tclmin $tkauxlibs Tcl_DoOneEvent
  then
    tk_libs="$tk_libs -ltk$tkmaj$tkmin -ltcl$tclmaj$tclmin $dllib"
  elif test -z "$tk_libs" && tk_libs=-L/usr/local/lib && \
    sh ./hasgot $tk_libs -ltcl$tclmaj.$tclmin $tkauxlibs Tcl_DoOneEvent
  then
    tk_libs="$tk_libs -ltk$tkmaj.$tkmin -ltcl$tclmaj.$tclmin $dllib"
  elif sh ./hasgot $tk_libs -ltcl$tclmaj$tclmin $tkauxlibs Tcl_DoOneEvent
  then
    tk_libs="$tk_libs -ltk$tkmaj$tkmin -ltcl$tclmaj$tclmin $dllib"
  elif sh ./hasgot -L/sw/lib $tk_libs -ltcl$tclmaj.$tclmin $tkauxlibs \
                   Tcl_DoOneEvent
  then tk_libs="-L/sw/lib -ltk$tkmaj.$tkmin -ltcl$tclmaj.$tclmin $dllib"
  elif sh ./hasgot -L/usr/pkg/lib $tk_libs $tk_x11_libs \
        -ltk$tkmaj$tkmin -ltcl$tclmaj$tclmin -lpthread $tkauxlibs \
                   Tcl_DoOneEvent
  then
    case "$host" in
      *-*-*bsd*) tk_libs="-R/usr/pkg/lib -L/usr/pkg/lib $tk_libs $tk_x11_libs -ltk$tkmaj$tkmin -ltcl$tclmaj$tclmin -lpthread $tkauxlibs";;
      *) tk_libs="-L/usr/pkg/lib $tk_libs $tk_x11_libs -ltk$tkmaj$tkmin -ltcl$tclmaj$tclmin -lpthread $tkauxlibs";;
    esac
  else
    echo "Tcl library not found."
    has_tk=false
  fi
fi

if test $has_tk = true; then
  if sh ./hasgot $tk_libs $tk_x11_libs $tkauxlibs Tk_SetGrid; then
    echo "Tcl/Tk libraries found."
  elif sh ./hasgot -L/sw/lib $tk_libs $tk_x11_libs $tkauxlibs Tk_SetGrid; then
    case "$host" in
      *-*-*bsd*) tk_libs="-R/sw/lib -L/sw/lib $tk_libs";;
      *) tk_libs="-L/sw/lib $tk_libs";;
    esac
    echo "Tcl/Tk libraries found."
  elif sh ./hasgot -L/usr/pkg/lib $tk_libs $tk_x11_libs $tkauxlibs \
                   Tk_SetGrid; then
    case "$host" in
      *-*-*bsd*) tk_libs="-R/usr/pkg/lib -L/usr/pkg/lib $tk_libs";;
      *) tk_libs="-L/usr/pkg/lib $tk_libs";;
    esac
    echo "Tcl/Tk libraries found."
  else
    echo "Tcl library found."
    echo "Tk library not found."
    has_tk=false
  fi
fi

if test $has_tk = true; then
  if test $tk_x11 = yes; then
    echo "TK_DEFS=$tk_defs "'$(X11_INCLUDES)' >> Makefile
    echo "TK_LINK=$tk_libs "'$(X11_LINK)' >> Makefile
  else
    echo "TK_DEFS=$tk_defs" >> Makefile
    echo "TK_LINK=$tk_libs" >> Makefile
  fi
  otherlibraries="$otherlibraries labltk"
else
  echo "Configuration failed, LablTk will not be built."
  echo "TK_DEFS=" >> Makefile
  echo "TK_LINK=" >> Makefile
fi

# Look for BFD library

if ./hasgot -i bfd.h && \
   ./hasgot -lbfd -ldl -liberty -lz bfd_openr; then
  echo "BFD library found."
  echo "#define HAS_LIBBFD" >> s.h
  echo "LIBBFD_LINK=-lbfd -ldl -liberty -lz" >> Makefile
else
  echo "BFD library not found, 'objinfo' will be unable to display info on .cmxs files"
  echo "LIBBFD_LINK=" >> Makefile
fi

# Check whether assembler supports CFI directives

asm_cfi_supported=false

export as aspp

if sh ./tryassemble cfi.S; then
  echo "#define ASM_CFI_SUPPORTED" >> m.h
  asm_cfi_supported=true
  echo "Assembler supports CFI"
else
  echo "Assembler does not support CFI"
fi

# Final twiddling of compiler options to work around known bugs

nativeccprofopts="$nativecccompopts"
case "$buggycc" in
  gcc.2.96)
    bytecccompopts="$bytecccompopts -fomit-frame-pointer"
    nativecccompopts="$nativecccompopts -fomit-frame-pointer";;
esac

# Finish generated files

cclibs="$cclibs $mathlib"

echo "BYTECC=$bytecc" >> Makefile
echo "BYTECCCOMPOPTS=$bytecccompopts" >> Makefile
echo "BYTECCLINKOPTS=$bytecclinkopts" >> Makefile
echo "BYTECCLIBS=$cclibs $dllib $curseslibs $pthread_link" >> Makefile
echo "BYTECCRPATH=$byteccrpath" >> Makefile
echo "EXE=$exe" >> Makefile
echo "SUPPORTS_SHARED_LIBRARIES=$shared_libraries_supported" >> Makefile
echo "SHAREDCCCOMPOPTS=$sharedcccompopts" >> Makefile
echo "MKSHAREDLIBRPATH=$mksharedlibrpath" >> Makefile
echo "NATDYNLINKOPTS=$natdynlinkopts" >> Makefile
cat >> Makefile <<EOF
SYSLIB=-l\$(1)
#ml let syslib x = "-l"^x;;

### How to build a static library
MKLIB=ar rc \$(1) \$(2); ranlib \$(1)
#ml let mklib out files opts = Printf.sprintf "ar rc %s %s %s; ranlib %s" out opts files out;;
EOF
echo "ARCH=$arch" >> Makefile
echo "MODEL=$model" >> Makefile
echo "SYSTEM=$system" >> Makefile
echo "NATIVECC=$nativecc" >> Makefile
echo "NATIVECCCOMPOPTS=$nativecccompopts" >> Makefile
echo "NATIVECCPROFOPTS=$nativeccprofopts" >> Makefile
echo "NATIVECCLINKOPTS=$nativecclinkopts" >> Makefile
echo "NATIVECCRPATH=$nativeccrpath" >> Makefile
echo "NATIVECCLIBS=$cclibs $dllib" >> Makefile
echo "ASM=$as" >> Makefile
echo "ASPP=$aspp" >> Makefile
echo "ASPPPROFFLAGS=$asppprofflags" >> Makefile
echo "PROFILING=$profiling" >> Makefile
echo "DYNLINKOPTS=$dllib" >> Makefile
echo "OTHERLIBRARIES=$otherlibraries" >> Makefile
echo "DEBUGGER=$debugger" >> Makefile
echo "CC_PROFILE=$cc_profile" >> Makefile
echo "SYSTHREAD_SUPPORT=$systhread_support" >> Makefile
echo "PARTIALLD=$partialld" >> Makefile
echo "PACKLD=\$(PARTIALLD) \$(NATIVECCLINKOPTS) -o " \
  | sed -e 's/ $/\\ /' >> Makefile
echo "DLLCCCOMPOPTS=$dllccompopts" >> Makefile
echo "IFLEXDIR=$iflexdir" >> Makefile
echo "O=o" >> Makefile
echo "A=a" >> Makefile
echo "SO=so" >> Makefile
echo "EXT_OBJ=.o" >> Makefile
echo "EXT_ASM=.s" >> Makefile
echo "EXT_LIB=.a" >> Makefile
echo "EXT_DLL=.so" >> Makefile
echo "EXTRALIBS=" >> Makefile
echo "CCOMPTYPE=cc" >> Makefile
echo "TOOLCHAIN=cc" >> Makefile
echo "NATDYNLINK=$natdynlink" >> Makefile
echo "CMXS=$cmxs" >> Makefile
echo "MKEXE=$mkexe" >> Makefile
echo "MKEXEDEBUGFLAG=$mkexedebugflag" >> Makefile
echo "MKDLL=$mksharedlib" >> Makefile
echo "MKMAINDLL=$mkmaindll" >> Makefile
echo "RUNTIMED=${debugruntime}" >>Makefile
echo "CAMLP4=${withcamlp4}" >>Makefile
echo "ASM_CFI_SUPPORTED=$asm_cfi_supported" >> Makefile

rm -f tst hasgot.c
rm -f ../m.h ../s.h ../Makefile
mv m.h s.h Makefile ..

# Print a summary

echo
echo "** Configuration summary **"
echo
echo "Directories where OCaml will be installed:"
echo "        binaries.................. $bindir"
echo "        standard library.......... $libdir"
echo "        manual pages.............. $mandir (with extension .$manext)"

echo "Configuration for the bytecode compiler:"
echo "        C compiler used........... $bytecc"
echo "        options for compiling..... $bytecccompopts"
echo "        options for linking....... $bytecclinkopts $cclibs $dllib $curseslibs $pthread_link"
if $shared_libraries_supported; then
echo "        shared libraries are supported"
echo "        options for compiling..... $sharedcccompopts $bytecccompopts"
echo "        command for building...... $mksharedlib -o lib.so $mksharedlibrpath/a/path objs"
else
echo "        shared libraries not supported"
fi

echo "Configuration for the native-code compiler:"
if test "$arch" = "none"; then
  echo "        (not supported on this platform)"
else
  if test "$model" = "default"; then
    echo "        hardware architecture..... $arch"
  else
    echo "        hardware architecture..... $arch ($model)"
  fi
  if test "$system" = "unknown"; then : ; else
  echo "        OS variant................ $system"
  fi
  echo "        C compiler used........... $nativecc"
  echo "        options for compiling..... $nativecccompopts"
  echo "        options for linking....... $nativecclinkopts $cclibs"
  echo "        assembler ................ $as"
  echo "        preprocessed assembler ... $aspp"
  if test "$asm_cfi_supported" = "true"; then
  echo "        assembler supports CFI ... yes"
  else
  echo "        assembler supports CFI ... no"
  fi
  echo "        native dynlink ........... $natdynlink"
  if test "$profiling" = "prof"; then
  echo "        profiling with gprof ..... supported"
  else
  echo "        profiling with gprof ..... not supported"
  fi
fi

if test "$debugger" = "ocamldebugger"; then
  echo "Source-level replay debugger: supported"
else
  echo "Source-level replay debugger: not supported"
fi

if test "$debugruntime" = "runtimed"; then
  echo "Debug runtime will be compiled and installed"
fi

echo "Additional libraries supported:"
echo "        $otherlibraries"

echo "Configuration for the \"num\" library:"
echo "        target architecture ...... $bng_arch (asm level $bng_asm_level)"

if $has_graph; then
echo "Configuration for the \"graph\" library:"
echo "        options for compiling .... $x11_include"
echo "        options for linking ...... $x11_link"
else
echo "The \"graph\" library: not supported"
fi

if test $has_tk = true; then
echo "Configuration for the \"labltk\" library:"
echo "        use tcl/tk version ....... $tcl_version"
echo "        options for compiling .... $tk_defs $tk_x11_include"
echo "        options for linking ...... $tk_libs $tk_x11_libs"
else
echo "The \"labltk\" library: not supported"
fi

echo
echo "** OCaml configuration completed successfully **"
echo

if test ! -z "$MACOSX_DEPLOYMENT_TARGET"; then
  echo "WARNING: the environment variable MACOSX_DEPLOYMENT_TARGET is set."
  echo "This will probably prevent compiling the OCaml system."
fi
Tip: Filter by directory path e.g. /media app.js to search for public/media/app.js.
Tip: Use camelCasing e.g. ProjME to search for ProjectModifiedEvent.java.
Tip: Filter by extension type e.g. /repo .js to search for all .js files in the /repo directory.
Tip: Separate your search with spaces e.g. /ssh pom.xml to search for src/ssh/pom.xml.
Tip: Use ↑ and ↓ arrow keys to navigate and return to view the file.
Tip: You can also navigate files with Ctrl+j (next) and Ctrl+k (previous) and view the file with Ctrl+o.
Tip: You can also navigate files with Alt+j (next) and Alt+k (previous) and view the file with Alt+o.