HTTPS SSH
ThermostatPi Set Up ------ Add to rc.local: sudo modprobe w1-gpio sudo modprobe w1-therm Find the device: $ cat /sys/bus/w1/devices/w1_bus_master1/w1_master_slaves Result: 28-0000032837ea Now cat the device: $ cat /sys/bus/w1/devices/28-0000032837ea/w1_slave Save this path in config.inc.php Install RRD: sudo apt-get install rrdtool Set up RRD DB: $ rrdtool create rPItemp.rrd --step 300 \ DS:temp1:GAUGE:600:-30:50 \ DS:temp2:GAUGE:600:-30:50 \ RRA:AVERAGE:0.5:1:12 \ RRA:AVERAGE:0.5:1:288 \ RRA:AVERAGE:0.5:12:168 \ RRA:AVERAGE:0.5:12:720 \ RRA:AVERAGE:0.5:288:365 Crontab * * * * * /usr/bin/php /home/USERPATH/thermostatpi/get_temp_rrd.php >> /tmp/tempcron.txt * * * * * /bin/sh /home/USERPATH/thermostatpi/generate_rrd_graphs.sh *** Update USB IR Toy Firmware *** Help URLS: - http://dangerousprototypes.com/docs/USB_IR_Toy_firmware_update - http://www.diolan.com/pic/bootloader_dwn.html Instructions: Short pins PGC and PGD wget http://jesshaas.com/software/IRToy-fw_update.tar.gz export LIBS=-lusb sudo apt-get install libusb-dev sudo ./configure (I got g++ errors if I run as pi) sudo make cd .. sudo IRToy-fw_update/fw_update -e -w -v -m all -vid 0x04D8 -pid 0xFD0B -ix USBIRToy.package.v22/firmware/USBIRToy.v22.hex IR Toy: Get library phpIRToy.inc.php from https://bitbucket.org/cdrum/phpirtoy and place in lib folder. Add apache's user to the dialout group in /etc/group add "extension=dio.so" to php.ini sudo apt-get install php5-sqlite mkdir log chmod 770 log chgrp www-data log mkdir db chmod 770 db chgrp www-data db Record presets using ir_store_codes.php