# Quick Start

## Install pylibftdi

See the _installation instructions for more detailed requirements, but hopefully things will work by just running the following:

$pip install pylibftdi  ## Connect and enumerate FTDI devices Connect the FTDI device to a free USB port. Run the list_devices example to enumerate connected FTDI devices: $ python -m pylibftdi.examples.list_devices


For each connected device, this will show manufacturer, model identifier, and serial number. With a single device connected, the output maybe something like the following:

FTDI:UM232H:FTUBIOWF

Though hopefully with a different serial number, or else you've either stolen mine, or you are me...

## Test some actual IO (well, at least O)

Connect an LED between D0 of your bit-bang capable device and ground, via a 330 - 1K ohm resistor as appropriate.

Test the installation and functioning of pylibftdi with the following:

\$ python -m pylibftdi.examples.led_flash


The LED should now flash at approximately 1Hz.