Commits

F Malpartida committed 6afdb6e Draft

Used 3 way jumper for 3.3V power output selection.

  • Participants
  • Parent commits 3f76c75
  • Branches evo proto Rev A

Comments (0)

Files changed (2)

File vinciDuino evo proto.brd

 <wire x1="3.5921" y1="0" x2="95.4679" y2="0" width="0.2032" layer="20"/>
 <wire x1="95.4679" y1="0" x2="99.06" y2="3.5921" width="0.2032" layer="20" curve="90"/>
 <wire x1="99.06" y1="3.5921" x2="99.06" y2="68.05395" width="0.2032" layer="20"/>
-<wire x1="56.896" y1="19.05" x2="74.93" y2="19.05" width="0.127" layer="22"/>
-<wire x1="56.896" y1="13.335" x2="74.93" y2="13.335" width="0.127" layer="22"/>
+<wire x1="58.166" y1="13.97" x2="76.2" y2="13.97" width="0.127" layer="22"/>
+<wire x1="58.166" y1="8.255" x2="76.2" y2="8.255" width="0.127" layer="22"/>
 <wire x1="53.975" y1="45.72" x2="54.864" y2="45.212" width="0.4064" layer="21"/>
 <wire x1="54.864" y1="45.212" x2="54.864" y2="46.228" width="0.4064" layer="21"/>
 <wire x1="54.864" y1="46.228" x2="53.975" y2="45.72" width="0.4064" layer="21"/>
 <text x="71.1285" y="5.2425" size="1.016" layer="21" font="vector" ratio="12" rot="R180">RST</text>
 <text x="75.7125" y="5.2885" size="1.016" layer="21" font="vector" ratio="12" rot="R180">RX</text>
 <text x="73.1725" y="5.2885" size="1.016" layer="21" font="vector" ratio="12" rot="R180">TX</text>
-<text x="74.93" y="19.558" size="0.8128" layer="22" font="vector" ratio="13" rot="MR0">vinciDuino Team</text>
-<text x="74.93" y="17.78" size="0.8128" layer="22" font="vector" ratio="12" rot="MR0">fmalpartida, Inizul, JMN</text>
-<text x="74.93" y="16.51" size="0.8128" layer="22" font="vector" ratio="10" rot="MR0">nayma, flico, yOPERO</text>
+<text x="76.2" y="14.478" size="0.8128" layer="22" font="vector" ratio="13" rot="MR0">vinciDuino Team</text>
+<text x="76.2" y="12.7" size="0.8128" layer="22" font="vector" ratio="12" rot="MR0">fmalpartida, Inizul, JMN</text>
+<text x="76.2" y="11.43" size="0.8128" layer="22" font="vector" ratio="10" rot="MR0">nayma, flico, yOPERO</text>
 <text x="84.5425" y="4.944" size="1.016" layer="21" font="vector" ratio="12" rot="R270">UART</text>
 <text x="61.976" y="-2.159" size="1.9304" layer="51" font="vector" ratio="12" rot="R180">vinciDuino evo Proto</text>
 <text x="19.05" y="-8.89" size="1.016" layer="51">Released under the Creative Commons Attribution Share-Alike 3.0 License</text>
 <text x="26.67" y="-6.35" size="1.016" layer="51">http://creativecommons.org/licenses/by-sa/3.0</text>
-<text x="74.93" y="20.828" size="0.8128" layer="22" font="vector" ratio="13" rot="MR0">Authors and contributors</text>
-<text x="74.93" y="15.24" size="0.8128" layer="22" font="vector" rot="MR0">shaktale, GabyCR, josemanu</text>
+<text x="76.2" y="15.748" size="0.8128" layer="22" font="vector" ratio="13" rot="MR0">Authors and contributors</text>
+<text x="76.2" y="10.16" size="0.8128" layer="22" font="vector" rot="MR0">shaktale, GabyCR, josemanu</text>
 <text x="55.607" y="39.361" size="1.27" layer="21" font="vector" ratio="12" rot="R270">~</text>
 <text x="55.113" y="38.058" size="1.016" layer="21" font="vector" ratio="12" rot="R270">PWM:</text>
 <text x="53.34" y="48.768" size="1.2" layer="21" font="vector" ratio="12" rot="R180">0</text>
 <wire x1="48.514" y1="0.889" x2="48.006" y2="0.889" width="0.4064" layer="21"/>
 <wire x1="48.006" y1="0.889" x2="48.26" y2="1.651" width="0.4064" layer="21"/>
 <wire x1="48.26" y1="1.651" x2="48.514" y2="0.889" width="0.4064" layer="21"/>
-<text x="74.93" y="13.97" size="0.8128" layer="22" font="vector" ratio="9" rot="MR0">chiva, Igor R, Terraguea45</text>
+<text x="76.2" y="8.89" size="0.8128" layer="22" font="vector" ratio="9" rot="MR0">chiva, Igor R, Terraguea45</text>
 <wire x1="55.118" y1="11.938" x2="55.626" y2="12.446" width="0.3048" layer="21"/>
 <wire x1="55.626" y1="12.446" x2="55.626" y2="23.876" width="0.3048" layer="21"/>
 <wire x1="55.626" y1="31.75" x2="55.626" y2="34.29" width="0.3048" layer="21"/>
 <text x="92.71" y="67.945" size="1.016" layer="26" font="vector" ratio="10" rot="MR0">PF5</text>
 <text x="92.71" y="65.405" size="1.016" layer="26" font="vector" ratio="10" rot="MR0">PF6</text>
 <text x="92.71" y="62.865" size="1.016" layer="26" font="vector" ratio="10" rot="MR0">PF7</text>
+<text x="90.551" y="23.622" size="0.8128" layer="26" font="vector" ratio="12" rot="MR270">LDO</text>
+<text x="90.678" y="29.591" size="0.8128" layer="26" font="vector" ratio="12" rot="MR270">AVR</text>
 </plain>
 <libraries>
 <library name="SparkFun">
 <rectangle x1="-0.254" y1="-0.254" x2="0.254" y2="0.254" layer="51"/>
 <rectangle x1="17.526" y1="-0.254" x2="18.034" y2="0.254" layer="51"/>
 </package>
+<package name="SJ_3">
+<wire x1="1.27" y1="-1.016" x2="-1.27" y2="-1.016" width="0.1524" layer="21"/>
+<wire x1="1.27" y1="1.016" x2="1.524" y2="0.762" width="0.1524" layer="21" curve="-90"/>
+<wire x1="-1.524" y1="0.762" x2="-1.27" y2="1.016" width="0.1524" layer="21" curve="-90"/>
+<wire x1="-1.524" y1="-0.762" x2="-1.27" y2="-1.016" width="0.1524" layer="21" curve="90"/>
+<wire x1="1.27" y1="-1.016" x2="1.524" y2="-0.762" width="0.1524" layer="21" curve="90"/>
+<wire x1="1.524" y1="-0.762" x2="1.524" y2="0.762" width="0.1524" layer="21"/>
+<wire x1="-1.524" y1="-0.762" x2="-1.524" y2="0.762" width="0.1524" layer="21"/>
+<wire x1="-1.27" y1="1.016" x2="1.27" y2="1.016" width="0.1524" layer="21"/>
+<smd name="1" x="-0.889" y="0" dx="0.635" dy="1.27" layer="1" cream="no"/>
+<smd name="2" x="0" y="0" dx="0.635" dy="1.27" layer="1" cream="no"/>
+<smd name="3" x="0.889" y="0" dx="0.635" dy="1.27" layer="1" cream="no"/>
+<text x="-1.27" y="1.27" size="0.4064" layer="25">&gt;NAME</text>
+<text x="-0.1001" y="0" size="0.02" layer="27">&gt;VALUE</text>
+<text x="-1.27" y="-1.905" size="0.4064" layer="27">&gt;VALUE</text>
+</package>
 </packages>
 </library>
 <library name="adafruit">
 <attribute name="NAME" x="71.1087" y="41.7249" size="0.8128" layer="21" font="vector" rot="R90"/>
 </element>
 <element name="U$1" library="fmc" package="VINCIDUINO" value="VINCIDUINO_" x="57.15" y="44.831" rot="MR180"/>
-<element name="REV_A" library="fmc" package="ARDUINO_FORUM@1" value="vinci evo proto" x="72.517" y="27.432" rot="MR0"/>
+<element name="REV_A" library="fmc" package="ARDUINO_FORUM@1" value="vinci evo proto" x="73.787" y="28.702" rot="MR0"/>
 <element name="C4" library="sparkfun_2" package="1206" value="1uF" x="73.787" y="45.339" smashed="yes">
 <attribute name="NAME" x="71.1087" y="44.7729" size="0.8128" layer="21" font="vector" ratio="10" rot="R90"/>
 </element>
-<element name="U$13" library="fmc" package="SA-BY" value="" x="87.757" y="13.335" rot="MR0"/>
+<element name="U$13" library="fmc" package="SA-BY" value="" x="90.297" y="8.255" rot="MR0"/>
 <element name="TX" library="SparkFun" package="LED-1206" value="Green" x="71.501" y="11.43" smashed="yes" rot="R90">
 <attribute name="NAME" x="70.739" y="7.747" size="0.8128" layer="21" font="vector" ratio="12"/>
 <attribute name="VALUE" x="73.279" y="10.414" size="0.4064" layer="27" rot="R90"/>
 <attribute name="NAME" x="65.4739" y="18.6803" size="0.8128" layer="25" font="vector" ratio="10"/>
 <attribute name="VALUE" x="64.4708" y="16.3115" size="0.4064" layer="27" rot="R270"/>
 </element>
-<element name="3.3V" library="SparkFun" package="SJ_2S-NO" value="LDO-AVR_3.3V" x="89.662" y="43.307" smashed="yes" rot="MR90">
-<attribute name="NAME" x="91.059" y="42.145" size="0.8128" layer="26" font="vector" ratio="11" rot="MR90"/>
-<attribute name="VALUE" x="88.011" y="42.399" size="0.4064" layer="28" rot="MR90"/>
+<element name="3.3V" library="SparkFun" package="SJ_3" value="" x="90.17" y="25.4" smashed="yes" rot="MR270">
+<attribute name="NAME" x="91.44" y="24.13" size="0.8128" layer="26" font="vector" ratio="12" rot="MR90"/>
+<attribute name="VALUE" x="90.17" y="25.5001" size="0.02" layer="28" rot="MR270"/>
+<attribute name="VALUE" x="92.075" y="26.67" size="0.4064" layer="28" rot="MR270"/>
 </element>
 </elements>
 <signals>
 <wire x1="74.041" y1="20.701" x2="74.041" y2="19.202" width="0.254" layer="1"/>
 </signal>
 <signal name="3.3V">
-<contactref element="C7" pad="1"/>
-<contactref element="IC1" pad="3"/>
-<wire x1="89.662" y1="25.908" x2="95.25" y2="20.32" width="0.4064" layer="16"/>
-<wire x1="89.157" y1="20.828" x2="93.472" y2="20.828" width="0.6096" layer="1"/>
-<wire x1="93.472" y1="20.828" x2="93.98" y2="20.32" width="0.6096" layer="1"/>
 <contactref element="JP4" pad="4"/>
-<wire x1="93.98" y1="20.32" x2="96.52" y2="20.32" width="0.6096" layer="1"/>
 <wire x1="95.25" y1="20.32" x2="96.52" y2="20.32" width="0.4064" layer="16"/>
-<wire x1="89.662" y1="25.908" x2="89.662" y2="42.857" width="0.4064" layer="16"/>
-<contactref element="3.3V" pad="1"/>
-<wire x1="89.662" y1="42.926" x2="89.662" y2="42.857" width="0.4064" layer="16"/>
-<wire x1="89.157" y1="20.828" x2="89.157" y2="17.9802" width="0.6096" layer="1"/>
-<wire x1="89.157" y1="17.9802" x2="89.2048" y2="17.9324" width="0.6096" layer="1"/>
+<contactref element="3.3V" pad="2"/>
+<wire x1="95.25" y1="20.32" x2="93.98" y2="21.59" width="0.4064" layer="16"/>
+<wire x1="93.98" y1="21.59" x2="93.98" y2="22.86" width="0.4064" layer="16"/>
+<wire x1="93.98" y1="22.86" x2="91.44" y2="25.4" width="0.4064" layer="16"/>
+<wire x1="91.44" y1="25.4" x2="90.17" y2="25.4" width="0.4064" layer="16"/>
 </signal>
 <signal name="N$1">
 <contactref element="R8" pad="2"/>
 <wire x1="77.216" y1="45.974" x2="77.216" y2="50.419" width="0.4064" layer="16"/>
 <wire x1="77.216" y1="50.419" x2="77.851" y2="51.054" width="0.4064" layer="16"/>
 <wire x1="77.851" y1="51.054" x2="87.249" y2="51.054" width="0.4064" layer="16"/>
-<wire x1="87.249" y1="51.054" x2="89.662" y2="48.641" width="0.4064" layer="16"/>
+<wire x1="87.249" y1="51.054" x2="90.17" y2="48.133" width="0.4064" layer="16"/>
 <wire x1="72.39" y1="41.91" x2="72.39" y2="42.288" width="0.3048" layer="1"/>
 <wire x1="72.39" y1="42.288" x2="72.387" y2="42.291" width="0.3048" layer="1"/>
-<contactref element="3.3V" pad="2"/>
-<wire x1="89.662" y1="48.641" x2="89.662" y2="43.757" width="0.4064" layer="16"/>
+<contactref element="3.3V" pad="1"/>
+<wire x1="90.17" y1="26.289" x2="90.17" y2="48.133" width="0.4064" layer="16"/>
 </signal>
 <signal name="N$11">
 </signal>
 <signal name="N$839">
 <via x="86.36" y="93.98" extent="1-16" drill="0.9" diameter="1.9304" shape="square"/>
 </signal>
+<signal name="N$840">
+<contactref element="C7" pad="1"/>
+<contactref element="IC1" pad="3"/>
+<wire x1="89.157" y1="20.828" x2="89.157" y2="17.9802" width="0.6096" layer="1"/>
+<wire x1="89.157" y1="17.9802" x2="89.2048" y2="17.9324" width="0.6096" layer="1"/>
+<contactref element="3.3V" pad="3"/>
+<wire x1="90.17" y1="24.511" x2="90.17" y2="23.622" width="0.4064" layer="16"/>
+<wire x1="90.17" y1="23.622" x2="91.186" y2="22.606" width="0.4064" layer="16"/>
+<via x="91.186" y="22.606" extent="1-16" drill="0.35"/>
+<wire x1="91.186" y1="22.606" x2="91.186" y2="21.59" width="0.4064" layer="1"/>
+<wire x1="91.186" y1="21.59" x2="90.551" y2="20.955" width="0.4064" layer="1"/>
+<wire x1="90.551" y1="20.955" x2="89.284" y2="20.955" width="0.4064" layer="1"/>
+<wire x1="89.284" y1="20.955" x2="89.157" y2="20.828" width="0.4064" layer="1"/>
+</signal>
 </signals>
 <errors>
 <approved hash="19,1,1cac578b5b28eb22"/>
+<approved hash="19,1,d3a711921103cfc5"/>
 <approved hash="19,1,2d2ce25583925018"/>
-<approved hash="19,1,d3a711921103cfc5"/>
 <approved hash="19,1,5d0ae9fac06e8fb3"/>
 </errors>
 </board>

File vinciDuino evo proto.sch

 <rectangle x1="-2.7432" y1="-3.6576" x2="-1.8796" y2="-1.8034" layer="51"/>
 <rectangle x1="1.8796" y1="-3.6576" x2="2.7432" y2="-1.8034" layer="51"/>
 </package>
+<package name="SJ_2W">
+<description>&lt;b&gt;Solder jumper&lt;/b&gt;</description>
+<wire x1="3.175" y1="-1.524" x2="-3.175" y2="-1.524" width="0.1524" layer="21"/>
+<wire x1="3.175" y1="1.524" x2="3.429" y2="1.27" width="0.1524" layer="21" curve="-90"/>
+<wire x1="-3.429" y1="1.27" x2="-3.175" y2="1.524" width="0.1524" layer="21" curve="-90"/>
+<wire x1="-3.429" y1="-1.27" x2="-3.175" y2="-1.524" width="0.1524" layer="21" curve="90"/>
+<wire x1="3.175" y1="-1.524" x2="3.429" y2="-1.27" width="0.1524" layer="21" curve="90"/>
+<wire x1="3.429" y1="-1.27" x2="3.429" y2="1.27" width="0.1524" layer="21"/>
+<wire x1="-3.429" y1="-1.27" x2="-3.429" y2="1.27" width="0.1524" layer="21"/>
+<wire x1="-3.175" y1="1.524" x2="3.175" y2="1.524" width="0.1524" layer="21"/>
+<wire x1="2.794" y1="0" x2="3.302" y2="0" width="0.1524" layer="51"/>
+<wire x1="-2.794" y1="0" x2="-3.302" y2="0" width="0.1524" layer="51"/>
+<wire x1="0" y1="0.762" x2="0" y2="1.397" width="0.1524" layer="51"/>
+<wire x1="0" y1="-1.397" x2="0" y2="-0.762" width="0.1524" layer="51"/>
+<wire x1="2.032" y1="0.127" x2="2.032" y2="-0.127" width="1.27" layer="51" curve="-180" cap="flat"/>
+<wire x1="-2.032" y1="-0.127" x2="-2.032" y2="0.127" width="1.27" layer="51" curve="-180" cap="flat"/>
+<smd name="1" x="-2.54" y="0" dx="1.27" dy="2.54" layer="1"/>
+<smd name="2" x="0" y="0" dx="1.27" dy="2.54" layer="1"/>
+<smd name="3" x="2.54" y="0" dx="1.27" dy="2.54" layer="1"/>
+<text x="-3.429" y="1.778" size="1.27" layer="25" ratio="10">&gt;NAME</text>
+<text x="-0.1001" y="0" size="0.02" layer="27">&gt;VALUE</text>
+<rectangle x1="-0.508" y1="-0.762" x2="0.508" y2="0.762" layer="51"/>
+</package>
+<package name="SJ_2">
+<description>&lt;b&gt;Solder jumper&lt;/b&gt;</description>
+<wire x1="2.159" y1="-1.016" x2="-2.159" y2="-1.016" width="0.1524" layer="21"/>
+<wire x1="2.159" y1="1.016" x2="2.413" y2="0.762" width="0.1524" layer="21" curve="-90"/>
+<wire x1="-2.413" y1="0.762" x2="-2.159" y2="1.016" width="0.1524" layer="21" curve="-90"/>
+<wire x1="-2.413" y1="-0.762" x2="-2.159" y2="-1.016" width="0.1524" layer="21" curve="90"/>
+<wire x1="2.159" y1="-1.016" x2="2.413" y2="-0.762" width="0.1524" layer="21" curve="90"/>
+<wire x1="2.413" y1="-0.762" x2="2.413" y2="0.762" width="0.1524" layer="21"/>
+<wire x1="-2.413" y1="-0.762" x2="-2.413" y2="0.762" width="0.1524" layer="21"/>
+<wire x1="-2.159" y1="1.016" x2="2.159" y2="1.016" width="0.1524" layer="21"/>
+<wire x1="1.778" y1="0" x2="2.286" y2="0" width="0.1524" layer="51"/>
+<wire x1="-1.778" y1="0" x2="-2.286" y2="0" width="0.1524" layer="51"/>
+<wire x1="0" y1="0.762" x2="0" y2="1.016" width="0.1524" layer="51"/>
+<wire x1="0" y1="-1.016" x2="0" y2="-0.762" width="0.1524" layer="51"/>
+<wire x1="1.016" y1="0.127" x2="1.016" y2="-0.127" width="1.27" layer="51" curve="-180" cap="flat"/>
+<wire x1="-1.016" y1="-0.127" x2="-1.016" y2="0.127" width="1.27" layer="51" curve="-180" cap="flat"/>
+<smd name="1" x="-1.524" y="0" dx="1.1684" dy="1.6002" layer="1"/>
+<smd name="2" x="0" y="0" dx="1.1684" dy="1.6002" layer="1"/>
+<smd name="3" x="1.524" y="0" dx="1.1684" dy="1.6002" layer="1"/>
+<text x="-2.413" y="1.27" size="1.27" layer="25" ratio="10">&gt;NAME</text>
+<text x="-0.1001" y="0" size="0.02" layer="27">&gt;VALUE</text>
+<rectangle x1="-0.508" y1="-0.762" x2="0.508" y2="0.762" layer="51"/>
+</package>
+<package name="SJ_3">
+<wire x1="1.27" y1="-1.016" x2="-1.27" y2="-1.016" width="0.1524" layer="21"/>
+<wire x1="1.27" y1="1.016" x2="1.524" y2="0.762" width="0.1524" layer="21" curve="-90"/>
+<wire x1="-1.524" y1="0.762" x2="-1.27" y2="1.016" width="0.1524" layer="21" curve="-90"/>
+<wire x1="-1.524" y1="-0.762" x2="-1.27" y2="-1.016" width="0.1524" layer="21" curve="90"/>
+<wire x1="1.27" y1="-1.016" x2="1.524" y2="-0.762" width="0.1524" layer="21" curve="90"/>
+<wire x1="1.524" y1="-0.762" x2="1.524" y2="0.762" width="0.1524" layer="21"/>
+<wire x1="-1.524" y1="-0.762" x2="-1.524" y2="0.762" width="0.1524" layer="21"/>
+<wire x1="-1.27" y1="1.016" x2="1.27" y2="1.016" width="0.1524" layer="21"/>
+<smd name="1" x="-0.889" y="0" dx="0.635" dy="1.27" layer="1" cream="no"/>
+<smd name="2" x="0" y="0" dx="0.635" dy="1.27" layer="1" cream="no"/>
+<smd name="3" x="0.889" y="0" dx="0.635" dy="1.27" layer="1" cream="no"/>
+<text x="-1.27" y="1.27" size="0.4064" layer="25">&gt;NAME</text>
+<text x="-0.1001" y="0" size="0.02" layer="27">&gt;VALUE</text>
+<text x="-1.27" y="-1.905" size="0.4064" layer="27">&gt;VALUE</text>
+</package>
+<package name="SJ_3_PASTE1&amp;2">
+<wire x1="1.27" y1="-1.016" x2="-1.27" y2="-1.016" width="0.1524" layer="21"/>
+<wire x1="1.27" y1="1.016" x2="1.524" y2="0.762" width="0.1524" layer="21" curve="-90"/>
+<wire x1="-1.524" y1="0.762" x2="-1.27" y2="1.016" width="0.1524" layer="21" curve="-90"/>
+<wire x1="-1.524" y1="-0.762" x2="-1.27" y2="-1.016" width="0.1524" layer="21" curve="90"/>
+<wire x1="1.27" y1="-1.016" x2="1.524" y2="-0.762" width="0.1524" layer="21" curve="90"/>
+<wire x1="1.524" y1="-0.762" x2="1.524" y2="0.762" width="0.1524" layer="21"/>
+<wire x1="-1.524" y1="-0.762" x2="-1.524" y2="0.762" width="0.1524" layer="21"/>
+<wire x1="-1.27" y1="1.016" x2="1.27" y2="1.016" width="0.1524" layer="21"/>
+<wire x1="0.1905" y1="0.508" x2="-1.016" y2="0.508" width="0.127" layer="51"/>
+<wire x1="-1.016" y1="0.508" x2="-1.016" y2="-0.508" width="0.127" layer="51"/>
+<wire x1="-1.016" y1="-0.508" x2="0.1905" y2="-0.508" width="0.127" layer="51"/>
+<wire x1="0.1905" y1="-0.508" x2="0.1905" y2="0.508" width="0.127" layer="51"/>
+<smd name="1" x="-0.8128" y="0" dx="0.635" dy="1.27" layer="1" cream="no"/>
+<smd name="2" x="0" y="0" dx="0.635" dy="1.27" layer="1" cream="no"/>
+<smd name="3" x="0.8128" y="0" dx="0.635" dy="1.27" layer="1" cream="no"/>
+<text x="-1.27" y="1.27" size="0.4064" layer="25">&gt;NAME</text>
+<text x="-0.1001" y="0" size="0.02" layer="27">&gt;VALUE</text>
+<text x="-1.27" y="-1.905" size="0.4064" layer="27">&gt;VALUE</text>
+<text x="-0.762" y="-0.4445" size="0.254" layer="51" rot="R40">PASTE</text>
+<rectangle x1="-1.4478" y1="-1.016" x2="0.2794" y2="0.9398" layer="31"/>
+</package>
+<package name="SJ_3_PASTE2&amp;3">
+<wire x1="1.27" y1="-1.016" x2="-1.27" y2="-1.016" width="0.1524" layer="21"/>
+<wire x1="1.27" y1="1.016" x2="1.524" y2="0.762" width="0.1524" layer="21" curve="-90"/>
+<wire x1="-1.524" y1="0.762" x2="-1.27" y2="1.016" width="0.1524" layer="21" curve="-90"/>
+<wire x1="-1.524" y1="-0.762" x2="-1.27" y2="-1.016" width="0.1524" layer="21" curve="90"/>
+<wire x1="1.27" y1="-1.016" x2="1.524" y2="-0.762" width="0.1524" layer="21" curve="90"/>
+<wire x1="1.524" y1="-0.762" x2="1.524" y2="0.762" width="0.1524" layer="21"/>
+<wire x1="-1.524" y1="-0.762" x2="-1.524" y2="0.762" width="0.1524" layer="21"/>
+<wire x1="-1.27" y1="1.016" x2="1.27" y2="1.016" width="0.1524" layer="21"/>
+<wire x1="1.016" y1="0.508" x2="-0.1905" y2="0.508" width="0.127" layer="51"/>
+<wire x1="-0.1905" y1="0.508" x2="-0.1905" y2="-0.508" width="0.127" layer="51"/>
+<wire x1="-0.1905" y1="-0.508" x2="1.016" y2="-0.508" width="0.127" layer="51"/>
+<wire x1="1.016" y1="-0.508" x2="1.016" y2="0.508" width="0.127" layer="51"/>
+<smd name="1" x="-0.8128" y="0" dx="0.635" dy="1.27" layer="1" cream="no"/>
+<smd name="2" x="0" y="0" dx="0.635" dy="1.27" layer="1" cream="no"/>
+<smd name="3" x="0.8128" y="0" dx="0.635" dy="1.27" layer="1" cream="no"/>
+<text x="-1.27" y="1.27" size="0.4064" layer="25">&gt;NAME</text>
+<text x="-0.1001" y="0" size="0.02" layer="27">&gt;VALUE</text>
+<text x="-1.27" y="-1.905" size="0.4064" layer="27">&gt;VALUE</text>
+<text x="0.0635" y="-0.4445" size="0.254" layer="51" rot="R40">PASTE</text>
+<rectangle x1="-0.2794" y1="-1.016" x2="1.4224" y2="0.9906" layer="31"/>
+</package>
 </packages>
 <symbols>
 <symbol name="GND">
 <pin name="GND" x="0" y="-7.62" visible="off" length="short" direction="in" rot="R90"/>
 <pin name="OUT" x="7.62" y="0" visible="off" length="short" direction="out" rot="R180"/>
 </symbol>
+<symbol name="SJ_2">
+<wire x1="-0.635" y1="-1.397" x2="0.635" y2="-1.397" width="1.27" layer="94" curve="180" cap="flat"/>
+<wire x1="-0.635" y1="1.397" x2="0.635" y2="1.397" width="1.27" layer="94" curve="-180" cap="flat"/>
+<wire x1="1.27" y1="-0.635" x2="-1.27" y2="-0.635" width="0.1524" layer="94"/>
+<wire x1="-1.27" y1="-0.635" x2="-1.27" y2="0" width="0.1524" layer="94"/>
+<wire x1="-1.27" y1="0" x2="-1.27" y2="0.635" width="0.1524" layer="94"/>
+<wire x1="-1.27" y1="0.635" x2="1.27" y2="0.635" width="0.1524" layer="94"/>
+<wire x1="1.27" y1="0.635" x2="1.27" y2="-0.635" width="0.1524" layer="94"/>
+<wire x1="-2.54" y1="0" x2="-1.27" y2="0" width="0.1524" layer="94"/>
+<text x="2.54" y="0.381" size="1.778" layer="95">&gt;NAME</text>
+<text x="2.54" y="-1.905" size="1.778" layer="96">&gt;VALUE</text>
+<rectangle x1="-1.27" y1="-0.635" x2="1.27" y2="0.635" layer="94"/>
+<pin name="3" x="0" y="-5.08" visible="off" length="short" direction="pas" rot="R90"/>
+<pin name="1" x="0" y="5.08" visible="off" length="short" direction="pas" rot="R270"/>
+<pin name="2" x="-5.08" y="0" visible="off" length="short" direction="pas"/>
+</symbol>
 </symbols>
 <devicesets>
 <deviceset name="GND" prefix="GND">
 </device>
 </devices>
 </deviceset>
+<deviceset name="SOLDERJUMPER_2WAY" prefix="SJ" uservalue="yes">
+<description>&lt;b&gt;Solder Jumper&lt;/b&gt;
+2 way solder jumper</description>
+<gates>
+<gate name="G$1" symbol="SJ_2" x="0" y="0"/>
+</gates>
+<devices>
+<device name="W" package="SJ_2W">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+<connect gate="G$1" pin="3" pad="3"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="T" package="SJ_2">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+<connect gate="G$1" pin="3" pad="3"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="S" package="SJ_3">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+<connect gate="G$1" pin="3" pad="3"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="PASTE1&amp;2" package="SJ_3_PASTE1&amp;2">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+<connect gate="G$1" pin="3" pad="3"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="PASTE2&amp;3" package="SJ_3_PASTE2&amp;3">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+<connect gate="G$1" pin="3" pad="3"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+</devices>
+</deviceset>
 </devicesets>
 </library>
 <library name="adafruit">
 <part name="REV_A" library="fmc" deviceset="BOARD_INFO_" device="" value="vinci evo proto"/>
 <part name="C4" library="sparkfun_2" deviceset="CAP" device="1206" value="1uF"/>
 <part name="GND19" library="SparkFun" deviceset="GND" device=""/>
-<part name="P+2" library="SparkFun" deviceset="3.3V" device=""/>
 <part name="P+7" library="SparkFun" deviceset="3.3V" device=""/>
 <part name="P+10" library="SparkFun" deviceset="VCC" device=""/>
 <part name="TX" library="SparkFun" deviceset="LED" device="1206" value="Green"/>
 </part>
 <part name="GND21" library="SparkFun" deviceset="GND" device=""/>
 <part name="P+12" library="SparkFun" deviceset="VCC" device=""/>
-<part name="P+13" library="SparkFun" deviceset="3.3V" device=""/>
 <part name="C7" library="sparkfun_2" deviceset="CAP" device="1206" value="1uF">
 <variant name="No 3.3V Reg" populate="no"/>
 </part>
 <part name="GND27" library="SparkFun" deviceset="GND" device=""/>
 <part name="D1" library="diode" deviceset="MBR0520LT" device=""/>
 <part name="L2" library="wuerth-elektronik" deviceset="WE-CBF" device="_1206W" value="Ferrite"/>
-<part name="3.3V" library="SparkFun" deviceset="SOLDERJUMPER" device="NO" value="LDO-AVR_3.3V"/>
+<part name="3.3V" library="SparkFun" deviceset="SOLDERJUMPER_2WAY" device="S"/>
+<part name="P+2" library="SparkFun" deviceset="3.3V" device=""/>
 </parts>
 <sheets>
 <sheet>
 <attribute name="VALUE" x="186.182" y="200.787" size="1.778" layer="96"/>
 </instance>
 <instance part="GND19" gate="1" x="185.42" y="190.5"/>
-<instance part="P+2" gate="G$1" x="142.24" y="175.26"/>
 <instance part="P+7" gate="G$1" x="327.66" y="119.38"/>
 <instance part="P+10" gate="1" x="266.7" y="71.12"/>
 <instance part="TX" gate="G$1" x="256.54" y="63.5" smashed="yes" rot="MR0">
 </instance>
 <instance part="GND21" gate="1" x="124.46" y="195.58"/>
 <instance part="P+12" gate="1" x="106.68" y="215.9"/>
-<instance part="P+13" gate="G$1" x="139.7" y="215.9"/>
 <instance part="C7" gate="G$1" x="139.7" y="203.2" smashed="yes">
 <attribute name="NAME" x="136.144" y="206.121" size="1.778" layer="95"/>
 <attribute name="VALUE" x="134.62" y="200.533" size="1.778" layer="96"/>
 <attribute name="VALUE" x="48.0314" y="116.84" size="1.778" layer="96" rot="R90"/>
 </instance>
 <instance part="L2" gate="G$1" x="73.66" y="81.28" rot="R90"/>
-<instance part="3.3V" gate="1" x="162.56" y="167.64" smashed="yes">
-<attribute name="NAME" x="160.528" y="164.084" size="1.778" layer="95"/>
-<attribute name="VALUE" x="154.432" y="169.418" size="1.778" layer="96"/>
-</instance>
+<instance part="3.3V" gate="G$1" x="162.56" y="167.64" rot="R270"/>
+<instance part="P+2" gate="G$1" x="162.56" y="175.26"/>
 </instances>
 <busses>
 </busses>
 <pinref part="JP4" gate="G$1" pin="4"/>
 </segment>
 <segment>
-<pinref part="P+13" gate="G$1" pin="3.3V"/>
-<pinref part="C7" gate="G$1" pin="1"/>
-<wire x1="139.7" y1="215.9" x2="139.7" y2="210.82" width="0.1524" layer="91"/>
-<pinref part="IC1" gate="G$1" pin="OUT"/>
-<wire x1="139.7" y1="210.82" x2="139.7" y2="208.28" width="0.1524" layer="91"/>
-<wire x1="132.08" y1="210.82" x2="139.7" y2="210.82" width="0.1524" layer="91"/>
-<junction x="139.7" y="210.82"/>
-</segment>
-<segment>
+<pinref part="3.3V" gate="G$1" pin="2"/>
 <pinref part="P+2" gate="G$1" pin="3.3V"/>
-<wire x1="142.24" y1="175.26" x2="142.24" y2="167.64" width="0.1524" layer="91"/>
-<wire x1="157.48" y1="167.64" x2="142.24" y2="167.64" width="0.1524" layer="91"/>
-<pinref part="3.3V" gate="1" pin="1"/>
+<wire x1="162.56" y1="175.26" x2="162.56" y2="172.72" width="0.1524" layer="91"/>
 </segment>
 </net>
 <net name="N$1" class="0">
 <wire x1="167.64" y1="167.64" x2="210.82" y2="167.64" width="0.1524" layer="91"/>
 <pinref part="C3" gate="G$1" pin="1"/>
 <wire x1="167.64" y1="139.7" x2="167.64" y2="167.64" width="0.1524" layer="91"/>
-<pinref part="3.3V" gate="1" pin="2"/>
+<pinref part="3.3V" gate="G$1" pin="1"/>
 <junction x="167.64" y="167.64"/>
 </segment>
 </net>
 <junction x="76.2" y="88.9"/>
 </segment>
 </net>
+<net name="N$840" class="0">
+<segment>
+<pinref part="C7" gate="G$1" pin="1"/>
+<pinref part="IC1" gate="G$1" pin="OUT"/>
+<wire x1="139.7" y1="210.82" x2="139.7" y2="208.28" width="0.1524" layer="91"/>
+<wire x1="132.08" y1="210.82" x2="139.7" y2="210.82" width="0.1524" layer="91"/>
+<wire x1="157.48" y1="167.64" x2="152.4" y2="167.64" width="0.1524" layer="91"/>
+<pinref part="3.3V" gate="G$1" pin="3"/>
+<wire x1="139.7" y1="210.82" x2="152.4" y2="210.82" width="0.1524" layer="91"/>
+<wire x1="152.4" y1="210.82" x2="152.4" y2="167.64" width="0.1524" layer="91"/>
+<junction x="139.7" y="210.82"/>
+</segment>
+</net>
 </nets>
 </sheet>
 </sheets>