Snippets
Created by
hiromitu
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 | %3456Booo1ScC$.....................................................%
ProcessMonitor:100de -> 3005e
NFE Driver : Read default device info.
NFE Driver : Read default device info.
NFE Driver : Search CIS Block. Found
NFE Driver : Set ECC Mode. 4bits
NFE Driver : Device number. 1
NFE Driver : Device module. Single die
NFE Driver : Total size. 980MB
Find valid CFG in SPI ROM
Uncompressing...Done.
Starting from 8000050c
+
enrolled successfuly:ACTIVEKEY[65292] RESOURCE ATTR:[2]
enrolled successfuly:ACTIVEKEY[65299] RESOURCE ATTR:[1]
enrolled successfuly:ACTIVEKEY[65296] RESOURCE ATTR:[1]
enrolled successfuly:ACTIVEKEY[65282] RESOURCE ATTR:[514]
enrolled successfuly:ACTIVEKEY[65305] RESOURCE ATTR:[1]
enrolled successfuly:ACTIVEKEY[65281] RESOURCE ATTR:[1]
enrolled successfuly:ACTIVEKEY[65316] RESOURCE ATTR:[1]
FATFS v0.5c 2005/06/22
GPIO v0.3 2007/03/22 Released
USB_HOST v1.2 2005/07/01
USB_DEVICE v1.02 2005/06/10Yuwen,add flash rom manager
nandflash_driver v1.0 2005/11/16 Coree
NAND_Disk v1.00 2006/01/03
MemoryStick_driver v0.9 2005/09/20 Yuwen
SD_Card_Reader v1.0 2006/01/05 Kevin
Ata_driver v1.1 2005/06/22 Yuwen
APMP_Hal v1.01 2005/05/23
OSAL v1.01 2005/05/31
SystemExplorer v0.9 2005/04/22
I2C_MASTER v1.0 2005/06/01
NLS_Unicode v1.01 2005/06/06
spiee v0.3 2005/09/21 Release
System_Shell v1.00 2005/1/1 Yuwen
rscmgr v1.0 2006/11/7 Jonas; Support miniRAM version
Gdi_Components v0.81 2005/06/27 Release
vout v0.6 2006/07/11 Eric62
AUDECODE v2.4a 2007/10/22 Kidd
APMP_Lradc v0.7 2005/07/07 Yuwen
VOCOLORLCD v1.0 2005/08/19
IMAGEBASE v1.1 2005/08/16 Andrew
PIC_VIEW v1.0 2005/08/16 Andrew
JPEG v1.01 2005/07/14 Andrew
BMP v1.01 2005/07/14 Andrew
TIFF v1.01 2005/09/21 Andrew
pwm v0.2 2007/02/14
AVI v1.01 2005/08/09 Andrew
MOV v1.01 2005/07/14 Andrew
VIDEO_VIEW v1.0 2005/08/16 Andrew
MENU_AP v1.0 2006/8/15 Asen Huang
MEDIAPLAY v1.03 2005/08/04 Singer Add playlist
PHOTO_APP v1.00 2005/10/30 Andrew
THUMBPHOTO_APP v1.00 2005/10/30 Andrew
spihx v0.2 2007/03/15
gdi v0.7 2005/05/31 Release
FM v1.1 2006/04/04
FileCopy_Dialog v1.7 2005/06/22 Release
AUDIO_LIB v3.2e 2008/01/28 Kidd
AUENCODE v0.6d 2007/04/04 Kidd
CConfig constructor!
Check sum ok
System shell init!
InitPMU()
Init PMU: Create IdeSem:1
PLL set to job:0x9
index:12
PMU Jumps to SRAM
change CPU freq ok
PMU Set default Job OK!(HYPER_JOB)
AUD: Malloc Audio DRAM Pool 102400 Bytes.
AUD: Total API/APO Byte Size = 265472
AUD: Malloc Audio DRAM Pool 102400 Bytes.
AUD: Total API/APO Byte Size = 265472
System::Init() , rtn = 0, m_MsgQueID=0
Global Spiee Obj = 0x8015CF4C
Enable Write Protect...
Enable Power Save Mode...
CStorMgr Disks: 0 1 2 3 4 5 6 7 8
STM: Find the dev: /dev/hda/
STM: Find the dev: /dev/hda/
STM: Find the dev: /dev/cfa/
STM: Find the dev: /dev/csda/
STM: Find the dev: /dev/csda/
STM: Find the dev: /dev/msa/
STM: Find the dev: /dev/sda/
STM: Find the dev: /dev/sda/
ATA_Init();
ASYNSEM: 7
Create FLAG OK
OK
NFE Driver : Read default device info.
NFE Driver : Read default device info.
NFE Driver : Search CIS Block. Found
NFE Driver : Set ECC Mode. 4bits
NFE Driver : Device number. 1
NFE Driver : Device module. Single die
NFE Driver : Total size. 980MB
No valid partitions defined in MBR
CRscMgr::Init(Bpp:0x18)
Send FM chip to suspend!
Init Software Timer ok
: starting CPE EHCI USB Controller
ehci_hcd (CPE_AMBA) at 0x0xc2000000, irq 40
Product: CPE_AMBA EHCI
Manufacturer: Non-OS 1.0 ehci_hcd
SerialNumber: cpe_ehci
FOTG200 OTGD Initialization
fotg200_driver (CPE_AMBA) at 0x0xc2000080, irq 40
CfgTableSize: 131Config table checksum:51->51
VID:174c
PID:5301
Vendor String:PF710 Photo Frame 1.00シ
Product String:Photo Frame 1.00シ
Revision String:1.00シSearching the dev: /dev/hda/
Find the dev: /dev/hda/, Share: 0
Searching the dev: /dev/cfa/
Find the dev: /dev/cfa/, Share: 0
Searching the dev: /dev/csda/
Find the dev: /dev/csda/, Share: 0
Searching the dev: /dev/csdb/
Searching the dev: /dev/msa/
Find the dev: /dev/msa/, Share: 0
Searching the dev:
InitLUNDevList Exit, 4 valid devices, 4 LUNs
t_cont reset by 3153 stanely addition
after t_cont reset
SPIHX Init OK
SPIHX_WriteReg 0x00: 0x67
SPIHX_WriteReg 0x01: 0x57
SPIHX_WriteReg 0x02: 0xff
SPIHX_WriteReg 0x03: 0x00
SPIHX_WriteReg 0x04: 0x00
SPIHX_WriteReg 0x05: 0x00
SPIHX_WriteReg 0x06: 0x0f
LCD_FG070060_SetContrast: 5
SPIHX_WriteReg 0x07: 0x06
SPIHX_WriteReg 0x08: 0x13
SPIHX_WriteReg 0x09: 0x1c
SPIHX_WriteReg 0x0a: 0x11
SPIHX_WriteReg 0x0b: 0x15
SPIHX_WriteReg 0x0c: 0x0a
SPIHX_WriteReg 0x0d: 0x0f
SPIHX_WriteReg 0x0e: 0x16
SPIHX_WriteReg 0x0f: 0x44
SPIHX_WriteReg 0x06: 0x4f
GDI_InitBaseComp Init...
CGDICompBase = 16 Bytes
CGDICompWin = 18 Bytes
CGDICompString = 29 Bytes
CGDICompImage = 29 Bytes
CGDICompImageWithText = 37 Bytes
CGDICompList = 39 Bytes
CGDICompMenuBox = 63 Bytes
CGDICompBar = 83 Bytes
_GDI_LOCINFO = 6 Bytes
GetVideoMgrRef().Init()
PWM_Init PWM0 divider 0
GetVideoMgrRef().Init(1)
after GetVideoMgrRef().Init()
LED On
back light on 65535
CBackLight::On()
LCD_FG070060_SetContrast: 3
SPIHX_WriteReg 0x07: 0x06
SPIHX_WriteReg 0x08: 0x12
SPIHX_WriteReg 0x09: 0x1a
SPIHX_WriteReg 0x0a: 0x0e
SPIHX_WriteReg 0x0b: 0x12
SPIHX_WriteReg 0x0c: 0x06
SPIHX_WriteReg 0x0d: 0x0b
SPIHX_WriteReg 0x0e: 0x11
Set PWM0 Duty 50
Usb Vbus off
UnmountLun: DiskID: 0, LUN: 0, Async: 1
ProcessLun: MsgID: 2, DiskID: 0, LUN: 0, Async: 1
Send Msg: ModuleID: 0, uDPara: 0x80000002, uWPara: 0x0
ProcessLun Sleep
StorMsg: 0, 80000002, 0
uDisk: 0, uLun: 0 bAsync: 1
GetLunItem: 0x0
GetPartItem: 0x0
Wakeup caller task
ProcessLun Wakeup
MountLun: DiskID: 0, LUN: 0, Async: 1
ProcessLun: MsgID: 1, DiskID: 0, LUN: 0, Async: 1
Send Msg: ModuleID: 0, uDPara: 0x80000001, uWPara: 0x0
ProcessLun Sleep
StorMsg: 0, 80000001, 0
uDisk: 0, uLun: 0 bAsync: 1
MountPart:: Enter
ProcessPart:: Enter
AllocPartItem: 0x804C8110
DevName:: /dev/hda/1
MntPath:: /HD1
AddPartItem: Enter
GetLunItem: 0x0
AddLunItem: Enter
AddLunItem: OK pLunItem: 0x804C8140
GetLunItem: 0x804C8140
AddPartItem: 0x804C8110, DiskID: 0, Lun: 0, PartItem: 0x804C8110
ProcessPart:: Exit 0
MountPart:: Exit
MountPart:: Enter
ProcessPart:: Enter
AllocPartItem: 0x806ADD80
DevName:: /dev/hda/2
MntPath:: /HD2
mount errProcessPart:: Exit -1
MountPart:: Exit
MountPart:: Enter
ProcessPart:: Enter
AllocPartItem: 0x806ADD80
DevName:: /dev/hda/3
MntPath:: /HD3
mount errProcessPart:: Exit -1
MountPart:: Exit
MountPart:: Enter
ProcessPart:: Enter
AllocPartItem: 0x806ADD80
DevName:: /dev/hda/4
MntPath:: /HD4
mount errProcessPart:: Exit -1
MountPart:: Exit
MountPart:: Enter
ProcessPart:: Enter
AllocPartItem: 0x806ADD80
DevName:: /dev/hda/5
MntPath:: /HD5
mount errProcessPart:: Exit -1
MountPart:: Exit
MountPart:: Enter
ProcessPart:: Enter
AllocPartItem: 0x806ADD80
DevName:: /dev/hda/6
MntPath:: /HD6
mount errProcessPart:: Exit -1
MountPart:: Exit
MountPart:: Enter
ProcessPart:: Enter
AllocPartItem: 0x806ADD80
DevName:: /dev/hda/7
MntPath:: /HD7
mount errProcessPart:: Exit -1
MountPart:: Exit
MountPart:: Enter
ProcessPart:: Enter
AllocPartItem: 0x806ADD80
DevName:: /dev/hda/8
MntPath:: /HD8
mount errProcessPart:: Exit -1
MountPart:: Exit
MountPart:: Enter
ProcessPart:: Enter
AllocPartItem: 0x806ADD80
DevName:: /dev/hda/9
MntPath:: /HD9
mount errProcessPart:: Exit -1
MountPart:: Exit
MountPart:: Enter
ProcessPart:: Enter
AllocPartItem: 0x806ADD80
DevName:: /dev/hda/10
MntPath:: /HD10
mount errProcessPart:: Exit -1
MountPart:: Exit
MountPart:: Enter
ProcessPart:: Enter
AllocPartItem: 0x806ADD80
DevName:: /dev/hda/11
MntPath:: /HD11
mount errProcessPart:: Exit -1
MountPart:: Exit
Wakeup caller task
ProcessLun Wakeup
GetLunItem: 0x804C8140
GetPartItem: 0x804C8110
GetPartMntPath: /HD1
AUD: Vol = 90
AUD: EQ mode = 11
AUD: Vol = 0
AUD: Balance = 0
GetLunItem: 0x804C8140
GetPartItem: 0x804C8110
GetPartMntPath: /HD1
CalibrationLRADC() END..val:35
TO SET activeMedia CF CARD 0..
SetMediaActive::SetMeida->2
devstatus is 3,iSize is 5
find the dev toset active!
SetMediaActive::SetMeida->5
devstatus is 3,iSize is 5
find the dev toset active!
TO SET activeMedia sd CARD 0..
SetMediaActive::SetMeida->3
devstatus is 3,iSize is 5
find the dev toset active!
GetLunItem: 0x804C8140
GetPartItem: 0x804C8110
GetPartMntPath: /HD1
SetMediaActive::SetMeida->0
devstatus is 2,iSize is 5
find the dev toset active!
GetLunItem: 0x804C8140
GetPartItem: 0x804C8110
GetPartMntPath: /HD1
GetLunCount: 1
GetLunNum: 0
GetLunItem: 0x804C8140
GetPartCount: 1
GetLunItem: 0x804C8140
GetPartItem: 0x804C8110
GetPartMntPath: /HD1
GetLunCount: 1
GetLunNum: 0
GetLunItem: 0x804C8140
GetPartCount: 1
GetMediaIsInit:: Media Init is 255
GetActiveMedia:: ActiveMedia is 255
GetMediaIsInit:: Media Init is 255
GetActiveMedia:: ActiveMedia is 255
GetMediaIsInit:: Media Init is 255
GetActiveMedia:: ActiveMedia is 255
GetMediaIsInit:: Media Init is 255
GetActiveMedia:: ActiveMedia is 255
GetMediaIsInit:: Media Init is 255
GetActiveMedia:: ActiveMedia is 255
GetMediaIsInit:: Media Init is 255
GetActiveMedia:: ActiveMedia is 255
GetMediaIsInit:: Media Init is 255
GetActiveMedia:: ActiveMedia is 255
GetMediaIsInit:: Media Init is 255
GetActiveMedia:: ActiveMedia is 255
GetMediaIsInit:: Media Init is 255
GetActiveMedia:: ActiveMedia is 255
GetMediaIsInit:: Media Init is 255
GetActiveMedia:: ActiveMedia is 255
GetMediaIsInit:: Media Init is 255
GetActiveMedia:: ActiveMedia is 255
GetMediaIsInit:: Media Init is 255
GetActiveMedia:: ActiveMedia is 255
GetMediaIsInit:: Media Init is 255
GetActiveMedia:: ActiveMedia is 255
GetMediaIsInit:: Media Init is 255
GetActiveMedia:: ActiveMedia is 255
GetMediaIsInit:: Media Init is 255
GetActiveMedia:: ActiveMedia is 255
SetMediaActive::Init to default value
GetMediaIsInit:: Media Init is 255
GetActiveMedia:: ActiveMedia is 0
LLLLLLLast loop: iCurDevInit = 0, iCurActiveDev = 0
GetActiveMedia:: ActiveMedia is 0
GetActiveMedia:: ActiveMedia is 0
GetActiveMedia:: ActiveMedia is 0
GetActiveMedia:: ActiveMedia is 0
GetActiveMedia:: ActiveMedia is 0
GetActiveMedia:: ActiveMedia is 0
GetLunItem: 0x804C8140
GetPartItem: 0x804C8110
GetPartMntPath: /HD1
pFile is /HD1/SYSTEM/CALENDAR.INI
open file ok!
New[0x806ae8f0]CAppPhoto
LoadApp[adr:0x806ae8f0]...
System::LoadApp( MsgQueID:6 )
System::LoadApp( TASK ID:7 )
LoadApp[adr:0x806ae8f0] successfully
DefAppProcess( 7 )
GetActiveMedia:: ActiveMedia is 0
GetLunItem: 0x804C8140
GetPartItem: 0x804C8110
GetPartMntPath: /HD1
SYS_GetActiveMeida::the path to return is /HD1/.
CPicView :: (0 0) len 480 height 234
iShowModeNum is 2
iShowModeNum is 1
iShowModeNum is 0
*** ___ PLAYRECBASE BuildDirTravelBase Time:: use 510724 ms ___***
New[0x8078ff90]CMPLAYAPP
StopAppsToFreeResource():
LoadApp[adr:0x8078ff90]...
System::LoadApp( MsgQueID:7 )
System::LoadApp( TASK ID:8 )
LoadApp[adr:0x8078ff90] successfully
DefAppProcess( 8 )
GetLunItem: 0x804C8140
GetPartItem: 0x804C8110
GetPartMntPath: /HD1
pFile is /HD1/SYSTEM/MPF.INF
open file ok!
GetLunItem: 0x804C8140
GetPartItem: 0x804C8110
GetPartMntPath: /HD1
TravelDirFromFile: File read open fail /HD1/SYSTEM/HD1-MP.INI ! will create/scan it
GetLunItem: 0x804C8140
GetPartItem: 0x804C8110
GetPartMntPath: /HD1
MP_BuildDirTravelBase: freesize : 0
GetLunItem: 0x804C8140
GetPartItem: 0x804C8110
GetPartMntPath: /HD1
Travel Base fail! Total file account = 0!
NFE Disk : Job 8 done.
|
Comments (0)
You can clone a snippet to your computer for local editing. Learn more.