600D - No Power / Boot at all

Issue #2280 new
Former user created an issue


i've been using ML for about 6 month and just a day ago i was traveling taking pictures and then the Canon 600D with firmware 1.0.2 and Magic Lantern was dead.

I tried several things, like first changing battery, checking the internal contacts. Then i tried the LED blink test, didnt work. I formatted the SD-card, make it bootable again using EOScard, copied ML again on SD, but nothing worked. Autofocus also don't work (changed lenses)....

Is there anything, i can do about this camera now?

Thank You

Comments (3)

  1. Alex

    If you can get the LED blinking test to work, we can look into it. Make sure the card is bootable, and after a failed startup attempt, remove the battery.

    Otherwise, there's nothing we can do, and it's very likely a hardware issue.

  2. Former user Account Deleted

    I only have to copy the autoexec.bin file of the LED Test on the bootable SD-Card right?

    This is what i've done yet, but still no reaction at all.

    (i had to create an account to reply)

  3. Carlos Martín Carrasco

    If you extract the SD and turn on the camera. ¿The camera work? ¿What version of ML? Check the SD door. If the door of SD are open, the camera dont work.

  4. Log in to comment