Peter Polidoro avatar Peter Polidoro committed c2b1b56

Added BOM

Comments (0)

Files changed (8)

+syntax: glob
+*.pyc
+*~
+*.o
+*.egg-info
+*.swp
+*.scad
+*.stl
+*.pkl
+*.dxf
+*.komodo*
+*.egg-info
+.DS_Store
+build
+dist
+.komodo*
+deb_dist
+-*- mode:org -*-
+
+# panels_controller_nano.lst
+| ref | value           |
+|-----+-----------------|
+| J1  | DB9_FEMALE_PINS |
+| K1  | PD3             |
+| K2  | PB1             |
+| P2  | CONN_1          |
+| P3  | CONN_1          |
+| P4  | CONN_1          |
+| P5  | CONN_1          |
+| R1  | 1k              |
+| R2  | 1k              |
+| U1  | ARDUINO_NANO    |
+
+# Bill of Materials
+| ! | part  | description                      | vendor       | part number   | quantity |   cost |
+|---+-------+----------------------------------+--------------+---------------+----------+--------|
+|   | PCB   | panels_controller_nano 2.0       | protoexpress | 193507-iNTJ   |        1 |  56.45 |
+|   | J1    | CONN D-SUB RCPT R/A 9POS GOLD/FL | digikey      | A35107-ND     |        1 |   1.87 |
+|   | K1-2  | CONN TERM BLOCK 2.54MM 3POS      | digikey      | 277-1274-ND   |        2 |   1.67 |
+|   | P2-5  | STANDOFF HEX 4-40THR ALUM .500"L | digikey      | 2203K-ND      |        4 |   0.45 |
+|   | P2-5  | SCREW MACHINE PHIL 4-40X3/8 SS   | digikey      | H782-ND       |        4 |   0.05 |
+|   | R1-2  | RES 1.00K OHM 1/4W 1% METAL FILM | digikey      | 1.00KXBK-ND   |        2 |   0.11 |
+|   | U1    | Arduino Nano 3.0                 | gravitech    | ARD-NANO30    |        1 |  34.99 |
+|   | U1    | CONN RCPT .100" 15POS SNGL TIN   | digikey      | SAM1222-15-ND |        2 |   2.09 |
+|---+-------+----------------------------------+--------------+---------------+----------+--------|
+| # | total |                                  |              |               |          | 103.05 |
+#+TBLFM: @10$7=(@I$quantity..@II$quantity)*(@I$cost..@II$cost);N
+                                 Apache License
+                           Version 2.0, January 2004
+                        http://www.apache.org/licenses/
+
+   TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
+
+   1. Definitions.
+
+      "License" shall mean the terms and conditions for use, reproduction,
+      and distribution as defined by Sections 1 through 9 of this document.
+
+      "Licensor" shall mean the copyright owner or entity authorized by
+      the copyright owner that is granting the License.
+
+      "Legal Entity" shall mean the union of the acting entity and all
+      other entities that control, are controlled by, or are under common
+      control with that entity. For the purposes of this definition,
+      "control" means (i) the power, direct or indirect, to cause the
+      direction or management of such entity, whether by contract or
+      otherwise, or (ii) ownership of fifty percent (50%) or more of the
+      outstanding shares, or (iii) beneficial ownership of such entity.
+
+      "You" (or "Your") shall mean an individual or Legal Entity
+      exercising permissions granted by this License.
+
+      "Source" form shall mean the preferred form for making modifications,
+      including but not limited to software source code, documentation
+      source, and configuration files.
+
+      "Object" form shall mean any form resulting from mechanical
+      transformation or translation of a Source form, including but
+      not limited to compiled object code, generated documentation,
+      and conversions to other media types.
+
+      "Work" shall mean the work of authorship, whether in Source or
+      Object form, made available under the License, as indicated by a
+      copyright notice that is included in or attached to the work
+      (an example is provided in the Appendix below).
+
+      "Derivative Works" shall mean any work, whether in Source or Object
+      form, that is based on (or derived from) the Work and for which the
+      editorial revisions, annotations, elaborations, or other modifications
+      represent, as a whole, an original work of authorship. For the purposes
+      of this License, Derivative Works shall not include works that remain
+      separable from, or merely link (or bind by name) to the interfaces of,
+      the Work and Derivative Works thereof.
+
+      "Contribution" shall mean any work of authorship, including
+      the original version of the Work and any modifications or additions
+      to that Work or Derivative Works thereof, that is intentionally
+      submitted to Licensor for inclusion in the Work by the copyright owner
+      or by an individual or Legal Entity authorized to submit on behalf of
+      the copyright owner. For the purposes of this definition, "submitted"
+      means any form of electronic, verbal, or written communication sent
+      to the Licensor or its representatives, including but not limited to
+      communication on electronic mailing lists, source code control systems,
+      and issue tracking systems that are managed by, or on behalf of, the
+      Licensor for the purpose of discussing and improving the Work, but
+      excluding communication that is conspicuously marked or otherwise
+      designated in writing by the copyright owner as "Not a Contribution."
+
+      "Contributor" shall mean Licensor and any individual or Legal Entity
+      on behalf of whom a Contribution has been received by Licensor and
+      subsequently incorporated within the Work.
+
+   2. Grant of Copyright License. Subject to the terms and conditions of
+      this License, each Contributor hereby grants to You a perpetual,
+      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
+      copyright license to reproduce, prepare Derivative Works of,
+      publicly display, publicly perform, sublicense, and distribute the
+      Work and such Derivative Works in Source or Object form.
+
+   3. Grant of Patent License. Subject to the terms and conditions of
+      this License, each Contributor hereby grants to You a perpetual,
+      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
+      (except as stated in this section) patent license to make, have made,
+      use, offer to sell, sell, import, and otherwise transfer the Work,
+      where such license applies only to those patent claims licensable
+      by such Contributor that are necessarily infringed by their
+      Contribution(s) alone or by combination of their Contribution(s)
+      with the Work to which such Contribution(s) was submitted. If You
+      institute patent litigation against any entity (including a
+      cross-claim or counterclaim in a lawsuit) alleging that the Work
+      or a Contribution incorporated within the Work constitutes direct
+      or contributory patent infringement, then any patent licenses
+      granted to You under this License for that Work shall terminate
+      as of the date such litigation is filed.
+
+   4. Redistribution. You may reproduce and distribute copies of the
+      Work or Derivative Works thereof in any medium, with or without
+      modifications, and in Source or Object form, provided that You
+      meet the following conditions:
+
+      (a) You must give any other recipients of the Work or
+          Derivative Works a copy of this License; and
+
+      (b) You must cause any modified files to carry prominent notices
+          stating that You changed the files; and
+
+      (c) You must retain, in the Source form of any Derivative Works
+          that You distribute, all copyright, patent, trademark, and
+          attribution notices from the Source form of the Work,
+          excluding those notices that do not pertain to any part of
+          the Derivative Works; and
+
+      (d) If the Work includes a "NOTICE" text file as part of its
+          distribution, then any Derivative Works that You distribute must
+          include a readable copy of the attribution notices contained
+          within such NOTICE file, excluding those notices that do not
+          pertain to any part of the Derivative Works, in at least one
+          of the following places: within a NOTICE text file distributed
+          as part of the Derivative Works; within the Source form or
+          documentation, if provided along with the Derivative Works; or,
+          within a display generated by the Derivative Works, if and
+          wherever such third-party notices normally appear. The contents
+          of the NOTICE file are for informational purposes only and
+          do not modify the License. You may add Your own attribution
+          notices within Derivative Works that You distribute, alongside
+          or as an addendum to the NOTICE text from the Work, provided
+          that such additional attribution notices cannot be construed
+          as modifying the License.
+
+      You may add Your own copyright statement to Your modifications and
+      may provide additional or different license terms and conditions
+      for use, reproduction, or distribution of Your modifications, or
+      for any such Derivative Works as a whole, provided Your use,
+      reproduction, and distribution of the Work otherwise complies with
+      the conditions stated in this License.
+
+   5. Submission of Contributions. Unless You explicitly state otherwise,
+      any Contribution intentionally submitted for inclusion in the Work
+      by You to the Licensor shall be under the terms and conditions of
+      this License, without any additional terms or conditions.
+      Notwithstanding the above, nothing herein shall supersede or modify
+      the terms of any separate license agreement you may have executed
+      with Licensor regarding such Contributions.
+
+   6. Trademarks. This License does not grant permission to use the trade
+      names, trademarks, service marks, or product names of the Licensor,
+      except as required for reasonable and customary use in describing the
+      origin of the Work and reproducing the content of the NOTICE file.
+
+   7. Disclaimer of Warranty. Unless required by applicable law or
+      agreed to in writing, Licensor provides the Work (and each
+      Contributor provides its Contributions) on an "AS IS" BASIS,
+      WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
+      implied, including, without limitation, any warranties or conditions
+      of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A
+      PARTICULAR PURPOSE. You are solely responsible for determining the
+      appropriateness of using or redistributing the Work and assume any
+      risks associated with Your exercise of permissions under this License.
+
+   8. Limitation of Liability. In no event and under no legal theory,
+      whether in tort (including negligence), contract, or otherwise,
+      unless required by applicable law (such as deliberate and grossly
+      negligent acts) or agreed to in writing, shall any Contributor be
+      liable to You for damages, including any direct, indirect, special,
+      incidental, or consequential damages of any character arising as a
+      result of this License or out of the use or inability to use the
+      Work (including but not limited to damages for loss of goodwill,
+      work stoppage, computer failure or malfunction, or any and all
+      other commercial damages or losses), even if such Contributor
+      has been advised of the possibility of such damages.
+
+   9. Accepting Warranty or Additional Liability. While redistributing
+      the Work or Derivative Works thereof, You may choose to offer,
+      and charge a fee for, acceptance of support, warranty, indemnity,
+      or other liability obligations and/or rights consistent with this
+      License. However, in accepting such obligations, You may act only
+      on Your own behalf and on Your sole responsibility, not on behalf
+      of any other Contributor, and only if You agree to indemnify,
+      defend, and hold each Contributor harmless for any liability
+      incurred by, or claims asserted against, such Contributor by reason
+      of your accepting any such warranty or additional liability.
+
+   END OF TERMS AND CONDITIONS
+
+   APPENDIX: How to apply the Apache License to your work.
+
+      To apply the Apache License to your work, attach the following
+      boilerplate notice, with the fields enclosed by brackets "[]"
+      replaced with your own identifying information. (Don't include
+      the brackets!)  The text should be enclosed in the appropriate
+      comment syntax for the file format. We also recommend that a
+      file or class name and description of purpose be included on the
+      same "printed page" as the copyright notice for easier
+      identification within third-party archives.
+
+   Copyright [yyyy] [name of copyright owner]
+
+   Licensed under the Apache License, Version 2.0 (the "License");
+   you may not use this file except in compliance with the License.
+   You may obtain a copy of the License at
+
+       http://www.apache.org/licenses/LICENSE-2.0
+
+   Unless required by applicable law or agreed to in writing, software
+   distributed under the License is distributed on an "AS IS" BASIS,
+   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+   See the License for the specific language governing permissions and
+   limitations under the License.
+
+
+

panels_controller_nano-cache.bak

-EESchema-LIBRARY Version 2.3  Date: Wed 16 Feb 2011 03:30:56 PM PST
+EESchema-LIBRARY Version 2.3  Date: Wed 16 Feb 2011 03:37:27 PM PST
 #
 # +5V
 #
 ENDDRAW
 ENDDEF
 #
-# C
-#
-DEF C C 0 10 N Y 1 F N
-F0 "C" 50 100 50 H V L CNN
-F1 "C" 50 -100 50 H V L CNN
-$FPLIST
- SM*
- C?
- C1-1
-$ENDFPLIST
-DRAW
-P 2 0 1 10  -100 -30  100 -30 N
-P 2 0 1 10  -100 30  100 30 N
-X ~ 1 0 200 170 D 40 40 1 1 P
-X ~ 2 0 -200 170 U 40 40 1 1 P
-ENDDRAW
-ENDDEF
-#
 # CONN_1
 #
 DEF ~CONN_1 P 0 30 N N 1 F N
 ENDDRAW
 ENDDEF
 #
-# CP
-#
-DEF CP C 0 10 N N 1 F N
-F0 "C" 50 100 50 H V L CNN
-F1 "CP" 50 -100 50 H V L CNN
-ALIAS CAPAPOL
-$FPLIST
- CP*
- SM*
-$ENDFPLIST
-DRAW
-P 4 0 1 8  -100 50  -100 -50  100 -50  100 50 N
-P 4 0 1 0  -50 50  -50 -20  50 -20  50 50 F
-X ~ 1 0 200 150 D 40 40 1 1 P
-X ~ 2 0 -200 150 U 40 40 1 1 P
-ENDDRAW
-ENDDEF
-#
 # DB9
 #
 DEF DB9 J 0 40 Y N 1 F N

panels_controller_nano-cache.lib

-EESchema-LIBRARY Version 2.3  Date: Wed 16 Feb 2011 03:37:27 PM PST
+EESchema-LIBRARY Version 2.3  Date: Thu 10 Mar 2011 10:54:14 AM PST
 #
 # +5V
 #

panels_controller_nano.bak

-PCBNEW-LibModule-V1  Tue 08 Feb 2011 03:12:00 PM PST
-$INDEX
-CP2
-CONNBLOCK3
-DCJACK_3PIN
-CONNBLOCK4
-CONNBLOCK2
-BNC
-DC_TO_DC
-arduino_nano
-MOUNT_HOLE_4_40
-DB9_90DEG_FEMALE_PINS
-SCREW_TERMINAL_3
-Mounting_Hole
-$EndINDEX
-$MODULE CP2
-Po 0 0 0 15 4D226FDF 00000000 ~~
-Li CP2
-Cd Condensateur = 2 pas
-Kw C
-Sc 00000000
-AR
-Op 0 0 0
-T0 0 0 400 400 0 80 N V 21 N"CP2"
-T1 0 0 400 400 0 80 N I 21 N"C***"
-T2 1850 -50 600 600 0 120 N V 21 N"-"
-T2 -1650 -50 600 600 0 120 N V 21 N"+"
-DS -1400 -400 1400 -400 120 21
-DS 1400 -400 1400 400 120 21
-DS 1400 400 -1400 400 120 21
-DS -1400 400 -1400 -400 120 21
-DS -1400 -200 -1200 -400 120 21
-$PAD
-Sh "1" C 550 550 0 0 0
-Dr 320 0 0
-At STD N 00E0FFFF
-Ne 0 ""
-Po -1000 0
-$EndPAD
-$PAD
-Sh "2" C 550 550 0 0 0
-Dr 320 0 0
-At STD N 00E0FFFF
-Ne 0 ""
-Po 1000 0
-$EndPAD
-$SHAPE3D
-Na "discret/capa_2pas_5x5mm.wrl"
-Sc 1.000000 1.000000 1.000000
-Of 0.000000 0.000000 0.000000
-Ro 0.000000 0.000000 0.000000
-$EndSHAPE3D
-$EndMODULE  CP2
-$MODULE DCJACK_3PIN
-Po 0 0 0 15 4CFEFD60 00000000 ~~
-Li DCJACK_3PIN
-Cd module 1 pin (ou trou mecanique de percage)
-Kw CONN JACK
-Sc 00000000
-AR
-Op 0 0 0
-T0 100 -2200 400 400 0 100 N V 21 N"DCJACK_3PIN"
-T1 -2000 2200 400 400 0 100 N I 21 N"VAL**"
-DS -3100 -1700 -3100 1700 150 21
-DS -2800 -1700 -3100 -1700 150 21
-DS -3100 1700 -2800 1700 150 21
-DS -1600 -1700 -1600 1700 150 21
-DS 2200 -1700 2200 1700 150 21
-DS -2800 1700 2200 1700 150 21
-DS -2800 -1700 2200 -1700 150 21
-$PAD
-Sh "2" C 1890 1890 0 0 0
-Dr 1100 0 0
-At STD N 00E0FFFF
-Ne 0 ""
-Po 0 0
-$EndPAD
-$PAD
-Sh "1" R 1890 1890 0 0 0
-Dr 1200 0 0
-At STD N 00E0FFFF
-Ne 0 ""
-Po 2480 0
-$EndPAD
-$PAD
-Sh "3" C 1890 1890 0 0 0
-Dr 1100 0 0
-At STD N 00E0FFFF
-Ne 0 ""
-Po 900 1969
-$EndPAD
-$SHAPE3D
-Na "connectors/POWER_21.wrl"
-Sc 0.800000 0.800000 0.800000
-Of 0.000000 0.000000 0.000000
-Ro 0.000000 0.000000 0.000000
-$EndSHAPE3D
-$EndMODULE  DCJACK_3PIN
-$MODULE CONNBLOCK2
-Po 0 0 0 15 4D295592 00000000 ~~
-Li CONNBLOCK2
-Sc 00000000
-AR /4CF06ED5
-Op 0 0 0
-T0 200 1900 600 600 0 120 N V 21 N"P12"
-T1 200 -2200 600 600 0 120 N I 21 N"CONNBLOCK2"
-DS -1600 -1350 -1600 1350 150 21
-DS -1600 1350 1600 1350 150 21
-DS 1600 1350 1600 -1350 150 21
-DS 1600 -1350 -1600 -1350 150 21
-$PAD
-Sh "1" R 630 630 0 0 0
-Dr 394 0 0
-At STD N 00E0FFFF
-Ne 58 "N-000029"
-Po -689 0
-$EndPAD
-$PAD
-Sh "2" C 630 630 0 0 0
-Dr 394 0 0
-At STD N 00E0FFFF
-Ne 59 "N-000055"
-Po 689 0
-$EndPAD
-$EndMODULE  CONNBLOCK2
-$MODULE BNC
-Po 0 0 0 15 4CF57F9F 00000000 ~~
-Li BNC
-Sc 00000000
-AR /4CF33ABB
-Op 0 0 0
-T0 100 5500 600 600 0 120 N V 21 N"P5"
-T1 100 1100 600 600 0 120 N I 21 N"CONN_2"
-DS 3000 -1000 3000 5000 150 21
-DS -3000 -1000 -3000 5000 150 21
-DS -2000 -1000 -2000 -1300 150 21
-DS -2000 -1300 2000 -1300 150 21
-DS 2000 -1300 2000 -1000 150 21
-DS -3000 3000 3000 3000 150 21
-DS -3000 -1000 3000 -1000 150 21
-DS -3000 5000 3000 5000 150 21
-$PAD
-Sh "" C 1200 1200 0 0 0
-Dr 791 0 0
-At STD N 00C0FFFF
-Ne 0 ""
-Po -2000 0
-$EndPAD
-$PAD
-Sh "" C 1200 1200 0 0 0
-Dr 791 0 0
-At STD N 00C0FFFF
-Ne 0 ""
-Po 2000 0
-$EndPAD
-$PAD
-Sh "1" R 650 650 0 0 0
-Dr 350 0 0
-At STD N 00C0FFFF
-Ne 11 "/ADC0"
-Po 0 2000
-$EndPAD
-$PAD
-Sh "2" C 650 650 0 0 0
-Dr 350 0 0
-At STD N 00C0FFFF
-Ne 2 "/GND"
-Po -1000 2000
-$EndPAD
-$PAD
-Sh "" C 1200 1200 0 0 0
-Dr 791 0 0
-At STD N 00C0FFFF
-Ne 0 ""
-Po -2000 4000
-$EndPAD
-$EndMODULE  BNC
-$MODULE DC_TO_DC
-Po 0 0 0 15 4CFC5B1C 00000000 ~~
-Li DC_TO_DC
-Sc 00000000
-AR
-Op 0 0 0
-T0 -6750 -5500 600 600 0 120 N V 21 N"DC_TO_DC"
-T1 0 -750 600 600 900 120 N V 21 N"VAL**"
-DS 10000 -5000 -10000 -5000 150 21
-DS -10000 -5000 -10000 5000 150 21
-DS -10000 5000 10000 5000 150 21
-DS 10000 5000 10000 -5000 150 21
-$PAD
-Sh "2" C 800 800 0 0 0
-Dr 450 0 0
-At STD N 00E0FFFF
-Ne 0 ""
-Po -3976 -1000
-$EndPAD
-$PAD
-Sh "1" C 800 800 0 0 0
-Dr 450 0 0
-At STD N 00E0FFFF
-Ne 0 ""
-Po -3976 1000
-$EndPAD
-$PAD
-Sh "5" C 800 800 0 0 0
-Dr 450 0 0
-At STD N 00E0FFFF
-Ne 0 ""
-Po 4016 -4016
-$EndPAD
-$PAD
-Sh "4" C 800 800 0 0 0
-Dr 450 0 0
-At STD N 00E0FFFF
-Ne 0 ""
-Po 4016 0
-$EndPAD
-$PAD
-Sh "3" C 800 800 0 0 0
-Dr 450 0 0
-At STD N 00E0FFFF
-Ne 0 ""
-Po 4016 4016
-$EndPAD
-$EndMODULE  DC_TO_DC
-$MODULE arduino_nano
-Po 0 0 0 15 4CF19021 00000000 ~~
-Li arduino_nano
-Sc 00000000
-AR
-Op 0 0 0
-T0 -1000 250 600 600 900 120 N V 21 N"arduino_nano"
-T1 1000 -250 600 600 900 120 N V 21 N"VAL**"
-DA 0 -7500 0 -7000 900 150 21
-DA 0 -7500 500 -7500 900 150 21
-DS 2500 -7500 500 -7500 150 21
-DS -2500 -7500 -500 -7500 150 21
-DS -2500 -7500 -2500 7500 150 21
-DS -2500 7500 2500 7500 150 21
-DS 2500 7500 2500 -7500 150 21
-$PAD
-Sh "1" R 690 600 0 0 0
-Dr 390 0 0
-At STD N 00E0FFFF
-Ne 0 ""
-Po -3000 -7000
-$EndPAD
-$PAD
-Sh "2" C 690 690 0 0 0
-Dr 390 0 0
-At STD N 00E0FFFF
-Ne 0 ""
-Po -3000 -6000
-$EndPAD
-$PAD
-Sh "3" C 690 690 0 0 0
-Dr 390 0 0
-At STD N 00E0FFFF
-Ne 0 ""
-Po -3000 -5000
-$EndPAD
-$PAD
-Sh "4" C 690 690 0 0 0
-Dr 390 0 0
-At STD N 00E0FFFF
-Ne 0 ""
-Po -3000 -4000
-$EndPAD
-$PAD
-Sh "5" C 690 690 0 0 0
-Dr 390 0 0
-At STD N 00E0FFFF
-Ne 0 ""
-Po -3000 -3000
-$EndPAD
-$PAD
-Sh "6" C 690 690 0 0 0
-Dr 390 0 0
-At STD N 00E0FFFF
-Ne 0 ""
-Po -3000 -2000
-$EndPAD
-$PAD
-Sh "7" C 690 690 0 0 0
-Dr 390 0 0
-At STD N 00E0FFFF
-Ne 0 ""
-Po -3000 -1000
-$EndPAD
-$PAD
-Sh "8" C 690 690 0 0 0
-Dr 390 0 0
-At STD N 00E0FFFF
-Ne 0 ""
-Po -3000 0
-$EndPAD
-$PAD
-Sh "9" C 690 690 0 0 0
-Dr 390 0 0
-At STD N 00E0FFFF
-Ne 0 ""
-Po -3000 1000
-$EndPAD
-$PAD
-Sh "10" C 690 690 0 0 0
-Dr 390 0 0
-At STD N 00E0FFFF
-Ne 0 ""
-Po -3000 2000
-$EndPAD
-$PAD
-Sh "11" C 690 690 0 0 0
-Dr 390 0 0
-At STD N 00E0FFFF
-Ne 0 ""
-Po -3000 3000
-$EndPAD
-$PAD
-Sh "12" C 690 690 0 0 0
-Dr 390 0 0
-At STD N 00E0FFFF
-Ne 0 ""
-Po -3000 4000
-$EndPAD
-$PAD
-Sh "13" C 690 690 0 0 0
-Dr 390 0 0
-At STD N 00E0FFFF
-Ne 0 ""
-Po -3000 5000
-$EndPAD
-$PAD
-Sh "14" C 690 690 0 0 0
-Dr 390 0 0
-At STD N 00E0FFFF
-Ne 0 ""
-Po -3000 6000
-$EndPAD
-$PAD
-Sh "15" C 690 690 0 0 0
-Dr 390 0 0
-At STD N 00E0FFFF
-Ne 0 ""
-Po -3000 7000
-$EndPAD
-$PAD
-Sh "16" C 690 690 0 0 0
-Dr 390 0 0
-At STD N 00E0FFFF
-Ne 0 ""
-Po 3000 7000
-$EndPAD
-$PAD
-Sh "17" C 690 690 0 0 0
-Dr 390 0 0
-At STD N 00E0FFFF
-Ne 0 ""
-Po 3000 6000
-$EndPAD
-$PAD
-Sh "18" C 690 690 0 0 0
-Dr 390 0 0
-At STD N 00E0FFFF
-Ne 0 ""
-Po 3000 5000
-$EndPAD
-$PAD
-Sh "19" C 690 690 0 0 0
-Dr 390 0 0
-At STD N 00E0FFFF
-Ne 0 ""
-Po 3000 4000
-$EndPAD
-$PAD
-Sh "20" C 690 690 0 0 0
-Dr 390 0 0
-At STD N 00E0FFFF
-Ne 0 ""
-Po 3000 3000
-$EndPAD
-$PAD
-Sh "21" C 690 690 0 0 0
-Dr 390 0 0
-At STD N 00E0FFFF
-Ne 0 ""
-Po 3000 2000
-$EndPAD
-$PAD
-Sh "22" C 690 690 0 0 0
-Dr 390 0 0
-At STD N 00E0FFFF
-Ne 0 ""
-Po 3000 1000
-$EndPAD
-$PAD
-Sh "23" C 690 690 0 0 0
-Dr 390 0 0
-At STD N 00E0FFFF
-Ne 0 ""
-Po 3000 0
-$EndPAD
-$PAD
-Sh "24" C 690 690 0 0 0
-Dr 390 0 0
-At STD N 00E0FFFF
-Ne 0 ""
-Po 3000 -1000
-$EndPAD
-$PAD
-Sh "25" C 690 690 0 0 0
-Dr 390 0 0
-At STD N 00E0FFFF
-Ne 0 ""
-Po 3000 -2000
-$EndPAD
-$PAD
-Sh "26" C 690 690 0 0 0
-Dr 390 0 0
-At STD N 00E0FFFF
-Ne 0 ""
-Po 3000 -3000
-$EndPAD
-$PAD
-Sh "27" C 690 690 0 0 0
-Dr 390 0 0
-At STD N 00E0FFFF
-Ne 0 ""
-Po 3000 -4000
-$EndPAD
-$PAD
-Sh "28" C 690 690 0 0 0
-Dr 390 0 0
-At STD N 00E0FFFF
-Ne 0 ""
-Po 3000 -5000
-$EndPAD
-$PAD
-Sh "29" C 690 690 0 0 0
-Dr 390 0 0
-At STD N 00E0FFFF
-Ne 0 ""
-Po 3000 -6000
-$EndPAD
-$PAD
-Sh "30" C 690 690 0 0 0
-Dr 390 0 0
-At STD N 00E0FFFF
-Ne 0 ""
-Po 3000 -7000
-$EndPAD
-$EndMODULE  arduino_nano
-$MODULE CONNBLOCK4
-Po 0 0 0 15 4D2B89F0 00000000 ~~
-Li CONNBLOCK4
-Sc 00000000
-AR
-Op 0 0 0
-T0 394 -2283 600 600 0 120 N V 21 N"CONNBLOCK4"
-T1 315 2283 600 600 0 120 N I 21 N"VAL**"
-DS -2992 -1339 -2992 1339 150 21
-DS -2992 1339 2992 1339 150 21
-DS 2992 1339 2992 -1339 150 21
-DS 2992 -1339 -2992 -1339 150 21
-$PAD
-Sh "2" C 709 709 0 0 0
-Dr 472 0 0
-At STD N 00E0FFFF
-Ne 0 ""
-Po -689 0
-$EndPAD
-$PAD
-Sh "1" R 709 709 0 0 0
-Dr 472 0 0
-At STD N 00E0FFFF
-Ne 0 ""
-Po -2067 0
-$EndPAD
-$PAD
-Sh "3" C 709 709 0 0 0
-Dr 472 0 0
-At STD N 00E0FFFF
-Ne 0 ""
-Po 689 0
-$EndPAD
-$PAD
-Sh "4" C 709 709 0 0 0
-Dr 472 0 0
-At STD N 00E0FFFF
-Ne 0 ""
-Po 2264 0
-$EndPAD
-$EndMODULE  CONNBLOCK4
-$MODULE CONNBLOCK3
-Po 0 0 0 15 4D3748F9 00000000 ~~
-Li CONNBLOCK3
-Sc 00000000
-AR
-Op 0 0 0
-T0 315 2047 600 600 0 120 N V 21 N"CONNBLOCK3"
-T1 -79 -2126 600 600 0 120 N I 21 N"VAL**"
-DS -2283 -1339 -2283 1339 150 21
-DS -2283 1339 2283 1339 150 21
-DS 2283 1339 2283 -1339 150 21
-DS 2283 -1339 -2283 -1339 150 21
-$PAD
-Sh "2" C 709 709 0 0 0
-Dr 472 0 0
-At STD N 00E0FFFF
-Ne 0 ""
-Po 0 0
-$EndPAD
-$PAD
-Sh "1" R 709 709 0 0 0
-Dr 472 0 0
-At STD N 00E0FFFF
-Ne 0 ""
-Po -1378 0
-$EndPAD
-$PAD
-Sh "3" C 709 709 0 0 0
-Dr 472 0 0
-At STD N 00E0FFFF
-Ne 0 ""
-Po 1378 0
-$EndPAD
-$EndMODULE  CONNBLOCK3
-$MODULE DB9_90DEG_FEMALE_PINS
-Po 0 0 0 15 4A78CE08 00000000 ~~
-Li DB9_90DEG_FEMALE_PINS
-Sc 00000000
-AR
-Op 0 0 0
-T0 -6600 3200 600 600 900 120 N V 21 N"DB9_90DEG_MALE_PINS"
-T1 0 -1300 600 600 0 120 N V 21 N"VAL**"
-DS 6000 0 6000 -750 150 21
-DS 6000 -750 -6000 -750 150 21
-DS -6000 -750 -6000 0 150 21
-DS -6000 0 -6000 4250 150 21
-DS -6000 4250 6000 4250 150 21
-DS 6000 4250 6000 0 150 21
-$PAD
-Sh "3" C 730 730 0 0 0
-Dr 430 0 0
-At STD N 00C0FFFF
-Ne 0 ""
-Po 0 0
-$EndPAD
-$PAD
-Sh "4" C 730 730 0 0 0
-Dr 430 0 0
-At STD N 00C0FFFF
-Ne 0 ""
-Po -1090 0
-$EndPAD
-$PAD
-Sh "5" C 730 730 0 0 0
-Dr 430 0 0
-At STD N 00C0FFFF
-Ne 0 ""
-Po -2180 0
-$EndPAD
-$PAD
-Sh "2" C 730 730 0 0 0
-Dr 430 0 0
-At STD N 00C0FFFF
-Ne 0 ""
-Po 1090 0
-$EndPAD
-$PAD
-Sh "1" R 730 730 0 0 0
-Dr 430 0 0
-At STD N 00C0FFFF
-Ne 0 ""
-Po 2180 0
-$EndPAD
-$PAD
-Sh "6" C 730 730 0 0 0
-Dr 430 0 0
-At STD N 00C0FFFF
-Ne 0 ""
-Po 1635 1120
-$EndPAD
-$PAD
-Sh "7" C 730 730 0 0 0
-Dr 430 0 0
-At STD N 00C0FFFF
-Ne 0 ""
-Po 545 1120
-$EndPAD
-$PAD
-Sh "8" C 730 730 0 0 0
-Dr 430 0 0
-At STD N 00C0FFFF
-Ne 0 ""
-Po -545 1120
-$EndPAD
-$PAD
-Sh "9" C 730 730 0 0 0
-Dr 430 0 0
-At STD N 00C0FFFF
-Ne 0 ""
-Po -1635 1120
-$EndPAD
-$PAD
-Sh "" C 1650 1650 0 0 0
-Dr 1250 0 0
-At STD N 00C0FFFF
-Ne 0 ""
-Po -4920 560
-$EndPAD
-$PAD
-Sh "" C 1650 1650 0 0 0
-Dr 1250 0 0
-At STD N 00C0FFFF
-Ne 0 ""
-Po 4920 560
-$EndPAD
-$EndMODULE  DB9_90DEG_FEMALE_PINS
-$MODULE SCREW_TERMINAL_3
-Po 0 0 0 15 4A32BA01 00000000 ~~
-Li SCREW_TERMINAL_3
-Sc 00000000
-AR
-Op 0 0 0
-T0 0 2000 600 600 0 120 N V 21 N"SCREW_TERMINAL_3"
-T1 0 -1750 600 600 0 120 N V 21 N"VAL**"
-DS -1750 1500 -1750 -1250 150 21
-DS -1750 -1250 1750 -1250 150 21
-DS 1750 -1250 1750 1500 150 21
-DS 1750 1500 -1750 1500 150 21
-$PAD
-Sh "2" C 730 730 0 0 0
-Dr 430 0 0
-At STD N 00C0FFFF
-Ne 0 ""
-Po 0 0
-$EndPAD
-$PAD
-Sh "3" C 730 730 0 0 0
-Dr 430 0 0
-At STD N 00C0FFFF
-Ne 0 ""
-Po 1000 0
-$EndPAD
-$PAD
-Sh "1" R 730 730 0 0 0
-Dr 430 0 0
-At STD N 00C0FFFF
-Ne 0 ""
-Po -1000 0
-$EndPAD
-$PAD
-Sh "" C 530 530 0 0 0
-Dr 430 0 0
-At STD N 00C0FFFF
-Ne 0 ""
-Po -1000 1000
-$EndPAD
-$PAD
-Sh "" C 530 530 0 0 0
-Dr 430 0 0
-At STD N 00C0FFFF
-Ne 0 ""
-Po 0 1000
-$EndPAD
-$PAD
-Sh "" C 530 530 0 0 0
-Dr 430 0 0
-At STD N 00C0FFFF
-Ne 0 ""
-Po 1000 1000
-$EndPAD
-$EndMODULE  SCREW_TERMINAL_3
-$MODULE Mounting_Hole
-Po 0 0 0 15 4A79CE3B 00000000 ~~
-Li Mounting_Hole
-Sc 00000000
-AR
-Op 0 0 0
-T0 0 -1300 600 600 0 120 N I 21 N"Mounting_Hole"
-T1 0 1300 600 600 0 120 N I 21 N"VAL**"
-$PAD
-Sh "" C 1500 1500 0 0 0
-Dr 1290 0 0
-At STD N 00C0FFFF
-Ne 0 ""
-Po 0 0
-$EndPAD
-$EndMODULE  Mounting_Hole
-$MODULE MOUNT_HOLE_4_40
-Po 0 0 0 15 4D51CDB9 00000000 ~~
-Li MOUNT_HOLE_4_40
-Sc 00000000
-AR 
-Op 0 0 0
-T0 0 -800 100 100 0 25 N I 21 N"MOUNT_HOLE"
-T1 0 800 100 100 0 25 N I 21 N"VAL**"
-DC 0 0 900 0 150 21
-$PAD
-Sh "1" C 1600 1600 0 0 0
-Dr 1200 0 0
-At STD N 00F0FFFF
-Ne 0 ""
-Po 0 0
-$EndPAD
-$EndMODULE  MOUNT_HOLE_4_40
-$EndLIBRARY
+EESchema Schematic File Version 2  date Wed 16 Feb 2011 03:37:27 PM PST
+LIBS:power
+LIBS:device
+LIBS:transistors
+LIBS:conn
+LIBS:linear
+LIBS:regul
+LIBS:74xx
+LIBS:cmos4000
+LIBS:adc-dac
+LIBS:memory
+LIBS:xilinx
+LIBS:special
+LIBS:microcontrollers
+LIBS:dsp
+LIBS:microchip
+LIBS:analog_switches
+LIBS:motorola
+LIBS:texas
+LIBS:intel
+LIBS:audio
+LIBS:interface
+LIBS:digital-audio
+LIBS:philips
+LIBS:display
+LIBS:cypress
+LIBS:siliconi
+LIBS:opto
+LIBS:atmel
+LIBS:contrib
+LIBS:valves
+LIBS:panels_controller_nano
+LIBS:panels_controller_nano-cache
+EELAYER 24  0
+EELAYER END
+$Descr A4 11700 8267
+Sheet 1 1
+Title "panels_controller_nano"
+Date "16 feb 2011"
+Rev "2.0"
+Comp ""
+Comment1 ""
+Comment2 ""
+Comment3 ""
+Comment4 ""
+$EndDescr
+Connection ~ 3950 4850
+Wire Wire Line
+	4200 5200 3950 5200
+Wire Wire Line
+	3950 5200 3950 4850
+Connection ~ 6150 6000
+Wire Wire Line
+	6150 6000 6250 6000
+Connection ~ 6150 5700
+Wire Wire Line
+	6250 5700 6150 5700
+Wire Wire Line
+	6350 2700 6350 2650
+Wire Wire Line
+	6350 2650 6000 2650
+Wire Wire Line
+	6000 2850 6250 2850
+Wire Wire Line
+	4100 5550 3350 5550
+Wire Wire Line
+	4300 3050 3850 3050
+Wire Wire Line
+	6500 3000 6500 3150
+Wire Wire Line
+	8300 3800 8300 3650
+Wire Wire Line
+	7950 2950 8300 2950
+Wire Wire Line
+	4100 5650 3850 5650
+Wire Wire Line
+	3850 5650 3850 5800
+Wire Wire Line
+	4100 4850 3850 4850
+Wire Wire Line
+	3850 4850 3850 5000
+Wire Wire Line
+	6700 2400 6700 2500
+Wire Wire Line
+	6500 2400 6500 2500
+Wire Wire Line
+	3850 4500 3850 4650
+Wire Wire Line
+	3850 4650 4100 4650
+Wire Wire Line
+	3850 5300 3850 5450
+Wire Wire Line
+	3850 5450 4100 5450
+Wire Wire Line
+	6500 3150 6000 3150
+Wire Wire Line
+	6000 3250 6700 3250
+Wire Wire Line
+	7950 3350 8300 3350
+Wire Wire Line
+	8300 3650 7950 3650
+Wire Wire Line
+	6700 3250 6700 3000
+Wire Wire Line
+	4300 3650 3850 3650
+Wire Wire Line
+	4100 4750 3350 4750
+Wire Wire Line
+	4300 2850 4150 2850
+Wire Wire Line
+	4150 2850 4150 2900
+Wire Wire Line
+	6250 2850 6250 3000
+Wire Wire Line
+	6250 3000 6350 3000
+Wire Wire Line
+	6350 3000 6350 2900
+Wire Wire Line
+	6250 5550 6150 5550
+Wire Wire Line
+	6150 5550 6150 6200
+Wire Wire Line
+	6250 5850 6150 5850
+Connection ~ 6150 5850
+Wire Wire Line
+	4000 4350 4000 4650
+Connection ~ 4000 4650
+$Comp
+L PWR_FLAG #FLG01
+U 1 1 4D5C5F9C
+P 4200 5200
+F 0 "#FLG01" H 4200 5470 30  0001 C CNN
+F 1 "PWR_FLAG" H 4200 5430 30  0000 C CNN
+	1    4200 5200
+	1    0    0    -1  
+$EndComp
+$Comp
+L PWR_FLAG #FLG02
+U 1 1 4D5C5F88
+P 4000 4350
+F 0 "#FLG02" H 4000 4620 30  0001 C CNN
+F 1 "PWR_FLAG" H 4000 4580 30  0000 C CNN
+	1    4000 4350
+	1    0    0    -1  
+$EndComp
+NoConn ~ 6000 2750
+$Comp
+L GND #PWR03
+U 1 1 4D51C5D1
+P 6150 6200
+F 0 "#PWR03" H 6150 6200 30  0001 C CNN
+F 1 "GND" H 6150 6130 30  0001 C CNN
+	1    6150 6200
+	1    0    0    -1  
+$EndComp
+$Comp
+L CONN_1 P5
+U 1 1 4D51C5CA
+P 6400 6000
+F 0 "P5" H 6480 6000 40  0000 L CNN
+F 1 "CONN_1" H 6400 6055 30  0001 C CNN
+	1    6400 6000
+	1    0    0    -1  
+$EndComp
+$Comp
+L CONN_1 P4
+U 1 1 4D51C5C7
+P 6400 5850
+F 0 "P4" H 6480 5850 40  0000 L CNN
+F 1 "CONN_1" H 6400 5905 30  0001 C CNN
+	1    6400 5850
+	1    0    0    -1  
+$EndComp
+$Comp
+L CONN_1 P3
+U 1 1 4D51C5C4
+P 6400 5700
+F 0 "P3" H 6480 5700 40  0000 L CNN
+F 1 "CONN_1" H 6400 5755 30  0001 C CNN
+	1    6400 5700
+	1    0    0    -1  
+$EndComp
+$Comp
+L CONN_1 P2
+U 1 1 4D51C5BE
+P 6400 5550
+F 0 "P2" H 6480 5550 40  0000 L CNN
+F 1 "CONN_1" H 6400 5605 30  0001 C CNN
+	1    6400 5550
+	1    0    0    -1  
+$EndComp
+$Comp
+L +5V #PWR04
+U 1 1 4D51AA08
+P 6350 2900
+F 0 "#PWR04" H 6350 2990 20  0001 C CNN
+F 1 "+5V" H 6350 2990 30  0000 C CNN
+	1    6350 2900
+	1    0    0    -1  
+$EndComp
+$Comp
+L GND #PWR05
+U 1 1 4D51A9DE
+P 6350 2700
+F 0 "#PWR05" H 6350 2700 30  0001 C CNN
+F 1 "GND" H 6350 2630 30  0001 C CNN
+	1    6350 2700
+	1    0    0    -1  
+$EndComp
+$Comp
+L GND #PWR06
+U 1 1 4D51A9D5
+P 4150 2900
+F 0 "#PWR06" H 4150 2900 30  0001 C CNN
+F 1 "GND" H 4150 2830 30  0001 C CNN
+	1    4150 2900
+	1    0    0    -1  
+$EndComp
+Text Label 3400 5550 0    60   ~ 0
+PB1
+Text Label 3400 4750 0    60   ~ 0
+PD3
+NoConn ~ 6000 2550
+NoConn ~ 6000 3350
+NoConn ~ 6000 3450
+NoConn ~ 6000 3550
+NoConn ~ 6000 3650
+NoConn ~ 6000 3750
+NoConn ~ 6000 3850
+NoConn ~ 4300 3550
+NoConn ~ 4300 3450
+NoConn ~ 4300 3350
+NoConn ~ 4300 3250
+NoConn ~ 4300 3150
+NoConn ~ 4300 2950
+Text Label 3900 3050 0    60   ~ 0
+PD3
+Text Label 3900 3650 0    60   ~ 0
+PB1
+NoConn ~ 4300 3750
+NoConn ~ 4300 3850
+NoConn ~ 4300 3950
+NoConn ~ 6000 3950
+NoConn ~ 6000 3050
+NoConn ~ 6000 2950
+NoConn ~ 4300 2750
+NoConn ~ 4300 2650
+NoConn ~ 4300 2550
+NoConn ~ 7950 3550
+NoConn ~ 7950 3450
+NoConn ~ 7950 3250
+NoConn ~ 7950 3150
+NoConn ~ 7950 3050
+NoConn ~ 7950 2850
+$Comp
+L GND #PWR07
+U 1 1 4D518B19
+P 8300 3800
+F 0 "#PWR07" H 8300 3800 30  0001 C CNN
+F 1 "GND" H 8300 3730 30  0001 C CNN
+	1    8300 3800
+	1    0    0    -1  
+$EndComp
+Text Label 8050 3350 0    60   ~ 0
+SDA
+Text Label 8050 2950 0    60   ~ 0
+SCL
+Text Label 6050 3250 0    60   ~ 0
+SDA
+Text Label 6050 3150 0    60   ~ 0
+SCL
+$Comp
+L ARDUINO_NANO U1
+U 1 1 4D3A16DC
+P 5150 3300
+F 0 "U1" H 4700 4250 60  0000 C CNN
+F 1 "ARDUINO_NANO" H 5150 2450 60  0000 C CNN
+	1    5150 3300
+	1    0    0    -1  
+$EndComp
+$Comp
+L GND #PWR08
+U 1 1 4AFA0646
+P 3850 5800
+F 0 "#PWR08" H 3850 5800 30  0001 C CNN
+F 1 "GND" H 3850 5730 30  0001 C CNN
+	1    3850 5800
+	1    0    0    -1  
+$EndComp
+$Comp
+L +5V #PWR09
+U 1 1 4AFA0642
+P 3850 5300
+F 0 "#PWR09" H 3850 5390 20  0001 C CNN
+F 1 "+5V" H 3850 5390 30  0000 C CNN
+	1    3850 5300
+	1    0    0    -1  
+$EndComp
+$Comp
+L GND #PWR010
+U 1 1 4AFA063F
+P 3850 5000
+F 0 "#PWR010" H 3850 5000 30  0001 C CNN
+F 1 "GND" H 3850 4930 30  0001 C CNN
+	1    3850 5000
+	1    0    0    -1  
+$EndComp
+$Comp
+L +5V #PWR011
+U 1 1 4AFA063C
+P 3850 4500
+F 0 "#PWR011" H 3850 4590 20  0001 C CNN
+F 1 "+5V" H 3850 4590 30  0000 C CNN
+	1    3850 4500
+	1    0    0    -1  
+$EndComp
+$Comp
+L CONN_3 K2
+U 1 1 4AFA05C1
+P 4450 5550
+F 0 "K2" V 4400 5550 50  0000 C CNN
+F 1 "PB1" V 4500 5550 40  0000 C CNN
+	1    4450 5550
+	1    0    0    -1  
+$EndComp
+$Comp
+L CONN_3 K1
+U 1 1 4AFA05BB
+P 4450 4750
+F 0 "K1" V 4400 4750 50  0000 C CNN
+F 1 "PD3" V 4500 4750 40  0000 C CNN
+	1    4450 4750
+	1    0    0    -1  
+$EndComp
+$Comp
+L +5V #PWR012
+U 1 1 4AF9BF86
+P 6700 2400
+F 0 "#PWR012" H 6700 2490 20  0001 C CNN
+F 1 "+5V" H 6700 2490 30  0000 C CNN
+	1    6700 2400
+	1    0    0    -1  
+$EndComp
+$Comp
+L +5V #PWR013
+U 1 1 4AF9BF83
+P 6500 2400
+F 0 "#PWR013" H 6500 2490 20  0001 C CNN
+F 1 "+5V" H 6500 2490 30  0000 C CNN
+	1    6500 2400
+	1    0    0    -1  
+$EndComp
+$Comp
+L R R2
+U 1 1 4AF9BF70
+P 6700 2750
+F 0 "R2" V 6780 2750 50  0000 C CNN
+F 1 "1k" V 6700 2750 50  0000 C CNN
+	1    6700 2750
+	1    0    0    -1  
+$EndComp
+$Comp
+L R R1
+U 1 1 4AF9BF68
+P 6500 2750
+F 0 "R1" V 6580 2750 50  0000 C CNN
+F 1 "1k" V 6500 2750 50  0000 C CNN
+	1    6500 2750
+	1    0    0    -1  
+$EndComp
+$Comp
+L DB9 J1
+U 1 1 4AF9BCD8
+P 7500 3250
+F 0 "J1" H 7500 3800 70  0000 C CNN
+F 1 "DB9_FEMALE_PINS" H 7500 2700 70  0000 C CNN
+	1    7500 3250
+	-1   0    0    1   
+$EndComp
+$EndSCHEMATC

panels_controller_nano.lst

+ref,value
+J1,DB9_FEMALE_PINS
+K1,PD3
+K2,PB1
+P2,CONN_1
+P3,CONN_1
+P4,CONN_1
+P5,CONN_1
+R1,1k
+R2,1k
+U1,ARDUINO_NANO

panels_controller_nano.sch

-EESchema Schematic File Version 2  date Wed 16 Feb 2011 03:37:27 PM PST
+EESchema Schematic File Version 2  date Thu 10 Mar 2011 10:54:14 AM PST
 LIBS:power
 LIBS:device
 LIBS:transistors
 $Descr A4 11700 8267
 Sheet 1 1
 Title "panels_controller_nano"
-Date "16 feb 2011"
+Date "10 mar 2011"
 Rev "2.0"
 Comp ""
 Comment1 ""
Tip: Filter by directory path e.g. /media app.js to search for public/media/app.js.
Tip: Use camelCasing e.g. ProjME to search for ProjectModifiedEvent.java.
Tip: Filter by extension type e.g. /repo .js to search for all .js files in the /repo directory.
Tip: Separate your search with spaces e.g. /ssh pom.xml to search for src/ssh/pom.xml.
Tip: Use ↑ and ↓ arrow keys to navigate and return to view the file.
Tip: You can also navigate files with Ctrl+j (next) and Ctrl+k (previous) and view the file with Ctrl+o.
Tip: You can also navigate files with Alt+j (next) and Alt+k (previous) and view the file with Alt+o.