Commits

iorodeo  committed 2bccd38 Draft

Minor word smithing.

  • Participants
  • Parent commits 7430912

Comments (0)

Files changed (6)

File _build/doctrees/environment.pickle

Binary file modified.

File _build/doctrees/index.doctree

Binary file modified.

File _build/html/_sources/index.txt

 display for designed for insect vision research. The G4 design is largely inspired
 by the earlier Panels G3 design, however there are a few key differences: 
 
-* smaller 20mm x 20mm LED matrices vs the 32mm x 32mm matrices for the G3 Panels.
+* smaller 20mm x 20mm LED matrices vs the larger 32mm x 32mm matrices used with the G3 Panels.
 * SPI vs I2C for communications between the controller and panels for higher pattern transfer speeds. 
-* the G4 panels display update is driven by and synchronous with the controller
+* synchronous controller driven dislay updates (patterns are only shown when the controller is sending pattern data).
 
 Table of Contents
 =====================================

File _build/html/index.html

 display for designed for insect vision research. The G4 design is largely inspired
 by the earlier Panels G3 design, however there are a few key differences:</p>
 <ul class="simple">
-<li>smaller 20mm x 20mm LED matrices vs the 32mm x 32mm matrices for the G3 Panels.</li>
+<li>smaller 20mm x 20mm LED matrices vs the larger 32mm x 32mm matrices used with the G3 Panels.</li>
 <li>SPI vs I2C for communications between the controller and panels for higher pattern transfer speeds.</li>
-<li>the G4 panels display update is driven by and synchronous with the controller</li>
+<li>synchronous controller driven dislay updates (patterns are only shown when the controller is sending pattern data).</li>
 </ul>
 </div>
 <div class="section" id="table-of-contents">

File _build/html/searchindex.js

-Search.setIndex({envversion:42,terms:{"default":2,code:1,shot:2,cener:[],show:1,when:[2,1],over:1,move:1,four:[2,1],bright:2,eda:1,higher:[0,1],follow:2,speed:0,line:1,uno_control:[],paramet:[],content:[],"1500hz":2,depend:2,just:[],arduino:1,byte0:[],fix:2,configur:1,selen:[],enough:1,send:1,should:[2,1],pcb:1,main:[],pixel:2,sent:2,first:2,earli:[],thi:[0,1,2],sourc:[0,1],fourth:0,format:2,"8x8":1,piec:1,initi:2,displi:[],jack:1,bit:2,now:1,exact:2,requir:1,pdf:[],like:[2,1],level:[],protyp:[],correpsond:[],grai:[],roughi:[],adjust:2,common:1,"_static":[],each:[2,1],found:[0,1],refer:1,page:0,vision:0,www:[],set:1,iorodeo:[],continu:2,tack:[],budget:1,rate:2,design:[0,1],spimessg:2,p23:1,respons:1,run:1,special:2,after:2,even:[],index:0,shown:1,scale:[],matrix:[2,1],accommod:1,pattern:[0,1,2],section:2,crucial:2,"32mm":0,identifi:2,research:0,current:[0,1],below:1,figur:[],larg:0,between:0,hardwar:1,size:2,order:[2,1],matric:[0,1,2],jumper:1,i2c:[],reci:[],led:[0,1,2],kei:0,panels_g4_firmwar:[],gener:0,deisplai:[],given:2,here:[0,1],modular:0,base:1,dislai:[],repositori:1,intiat:[],p30:1,"2x20":1,shortest:2,stage:0,arena:[],src:[],search:0,contol:[],column:[2,1],frequenc:2,howev:[0,2],larger:2,synchron:0,equal:2,kicad:1,length:2,intens:2,"20mm":[0,1],action:[],comm:[],chang:2,com:[],spimessag:2,oper:[2,1],softwar:1,via:[2,1],simpli:2,can:[0,1,2],onc:2,modul:0,inspir:0,encod:2,number:2,system:[],duti:2,header:1,smaller:0,messag:[],suppli:[],diplai:[],earlier:0,total:2,"byte":2,select:1,"2x30":1,reciev:[],compon:[],differ:0,from:[2,1],usb:1,suffici:1,commun:[],stretch:2,transfer:0,support:2,two:[2,1],"long":2,next:2,mercuri:1,few:0,valu:2,suit:1,forward:2,i2cmessag:2,addit:[],contro:[],lenght:[],imag:1,copi:[],bitbucket:[],specifi:2,provid:1,visual:2,part:2,"1mm":1,prototyp:[0,1],paenl:[],here_stat:[],exactli:2,than:[2,1],must:2,also:2,either:[],subsequ:2,commpon:[],describ:2,consist:[2,1],possibl:2,whether:2,align:[],displai:[],durat:2,"60_pin":1,garbl:2,remain:2,three:1,abov:2,posit:1,"static":2,purpos:[],stretch_paramet:2,bit0:[],control:[],"function":1,planar:1,constant:2,pin:1,msbfirst:2,demo:[],chip:1,p22:1,jpg:[],mode:[2,1],"4mhz":2,spi:[],inform:2,decreas:2,file:1,our:[],schemat:1,attach:1,"25a":1,stretch_param:[],end:[],etc:2,perform:2,allow:[],six:1,video:1,maximum:2,data:[2,1],note:[2,1],how:2,other:2,split:[2,1],which:[2,1],advis:2,test:[],simpl:1,singl:1,updat:[0,2],polar:1,panels_g4_doc:[],http:[],firmwar:1,see:[],atmega328:[2,1],org:[],previou:[],driver:[],effect:2,cycl:2,driven:0,insect:0,"4th":[],power:[],stripe:1,micro:[2,1],mai:2,contain:2,associ:[2,1],stack:2,demonstr:1,sub:[],connect:1,demonstrol:[],"500hz":2,receiv:[2,1],center:1,thu:2,clock:2,correspond:2,connector:1,more:1,gray_scale_id:2,determin:2,dipslai:[],connnect:[],uno:1,roughli:1,longest:2},objtypes:{},objnames:{},filenames:["index","components","communications"],titles:["Introduction","System Components","SPI and I2C Communications"],objects:{},titleterms:{control:1,set:[],demo:1,tabl:0,indic:0,spi:2,suppli:1,paramet:2,compon:1,scale:2,sub:1,commun:2,system:1,messag:2,content:0,overview:2,test:1,document:[],power:1,welcom:[],driver:1,comm:1,panel:1,arena:1,level:2,displai:1,grai:2,introduct:0,i2c:2}})
+Search.setIndex({envversion:42,terms:{code:1,shot:2,cener:[],show:1,when:[0,1,2],over:1,move:1,"4th":[],uno:1,four:[2,1],bright:2,eda:1,follow:2,roughli:1,speed:0,here_stat:[],associ:[2,1],paramet:[],current:[0,1],"1500hz":2,depend:2,just:[],arduino:1,fix:2,configur:1,selen:[],figur:[],send:[0,1],should:[2,1],whether:2,pcb:1,two:[2,1],main:[],pixel:2,sent:2,earli:[],sourc:[0,1],which:[2,1],format:2,"8x8":1,piec:1,initi:2,displi:[],jack:1,bit:2,now:1,exact:2,requir:1,spimessag:2,pdf:[],like:[2,1],level:[],protyp:[],previou:[],correpsond:[],accommod:1,roughi:[],adjust:2,common:1,"_static":[],each:[2,1],found:[0,1],jumper:1,page:0,vision:0,www:[],set:1,iorodeo:[],continu:2,displai:[],rate:2,design:[0,1],spimessg:2,p23:1,respons:1,led:[0,1,2],special:2,firmwar:1,even:[],index:0,shown:[0,1],scale:[],matrix:[2,1],grai:[],pattern:[0,1,2],section:2,crucial:2,"32mm":0,identifi:2,research:0,content:[],below:1,enough:1,larg:0,between:0,hardwar:1,determin:2,how:2,"2x30":1,matric:[0,1,2],refer:1,reci:[],run:1,kei:0,panels_g4_firmwar:[],total:2,gener:0,deisplai:[],differ:0,here:[0,1],thu:2,modular:0,base:1,comm:[],repositori:1,intiat:[],p30:1,"2x20":1,shortest:2,stage:0,arena:[],src:[],search:0,contol:[],column:[2,1],frequenc:2,howev:[0,2],larger:[0,2],synchron:0,equal:2,kicad:1,length:2,intens:2,"20mm":[0,1],action:[],dislai:0,chang:2,com:[],first:2,oper:[2,1],softwar:1,via:[2,1],simpli:2,onc:2,modul:0,inspir:0,encod:2,number:2,system:[],duti:2,header:1,smaller:0,"long":2,suppli:[],diplai:[],earlier:0,byte0:[],"byte":2,select:1,size:2,reciev:[],mercuri:1,given:2,from:[2,1],usb:1,suffici:1,commun:[],stretch:2,transfer:0,support:2,three:1,messag:[],next:2,compon:[],few:0,valu:2,suit:1,forward:2,i2cmessag:2,addit:[],contro:[],lenght:[],panels_g4_doc:[],imag:1,copi:[],"500hz":2,specifi:2,provid:1,visual:2,part:2,"1mm":1,prototyp:[0,1],paenl:[],line:1,exactli:2,than:[2,1],must:2,either:[],subsequ:2,commpon:[],describ:2,consist:[2,1],possibl:2,"default":2,align:[],budget:1,durat:2,"60_pin":1,garbl:2,remain:2,can:[0,1,2],abov:2,posit:1,"static":2,purpos:[],stretch_paramet:2,bit0:[],control:[],"function":1,planar:1,constant:2,pin:1,msbfirst:2,demo:[],chip:1,p22:1,jpg:[],mode:[2,1],spi:[],decreas:2,file:1,our:[],schemat:1,attach:1,stretch_param:[],end:[],etc:2,perform:2,allow:[],six:1,video:1,maximum:2,note:[2,1],also:2,other:2,split:[2,1],fourth:0,advis:2,test:[],more:1,contain:2,simpl:1,singl:1,higher:[0,1],polar:1,"25a":1,http:[],uno_control:[],see:[],atmega328:[2,1],org:[],after:2,driver:[],effect:2,driven:0,insect:0,tack:[],power:[],stripe:1,micro:[2,1],mai:2,"4mhz":2,data:[0,1,2],stack:2,demonstr:1,sub:[],connect:1,demonstrol:[],bitbucket:[],receiv:[2,1],center:1,cycl:2,clock:2,correspond:2,onli:0,connector:1,inform:2,gray_scale_id:2,thi:[0,1,2],dipslai:[],connnect:[],updat:[0,2],i2c:[],order:[2,1],longest:2},objtypes:{},objnames:{},filenames:["index","components","communications"],titles:["Introduction","System Components","SPI and I2C Communications"],objects:{},titleterms:{control:1,set:[],demo:1,tabl:0,indic:0,spi:2,suppli:1,panel:1,paramet:2,compon:1,scale:2,sub:1,commun:2,system:1,messag:2,content:0,overview:2,test:1,document:[],power:1,driver:1,comm:1,welcom:[],arena:1,level:2,displai:1,grai:2,introduct:0,i2c:2}})
 display for designed for insect vision research. The G4 design is largely inspired
 by the earlier Panels G3 design, however there are a few key differences: 
 
-* smaller 20mm x 20mm LED matrices vs the 32mm x 32mm matrices for the G3 Panels.
+* smaller 20mm x 20mm LED matrices vs the larger 32mm x 32mm matrices used with the G3 Panels.
 * SPI vs I2C for communications between the controller and panels for higher pattern transfer speeds. 
-* the G4 panels display update is driven by and synchronous with the controller
+* synchronous controller driven dislay updates (patterns are only shown when the controller is sending pattern data).
 
 Table of Contents
 =====================================