4.4.5+hotspare-without_degradable_check
-
- Loading...
| Author | Commit | Message | Date | Builds | ||
|---|---|---|---|---|---|---|
| 250+ commits behind master. | ||||||
|
btrfs: Add 'nohotspare' mount option to disable autoreplacement of failed device
In multi-RAID configuration we may want to disable autoreplacement of
failed devices for some filesystems. So, define mount options
'nohotspare' and 'hotspare' for this.
Signed-off-by: Yauhen Kharuzhy <yauhen.kharuzhy@zavadatar.com>
|
|
||||
|
|
btrfs: Fix race in atoreplacement thread stopping code
Race between close_ctree() and casualty_kthread():
close_ctree():
if (fs_info->casualty_kthread)
kthread_stop(fs_info->casualty_kthread);
casualty_kthread():
out:
fs_info->casualty_kthread = NULL;
At SMP system, kthread_stop() argument can be changed to NULL after
check in if (). Some kind of synchronization is needed.
Oops:
[48878.674314] BUG: unable to handl…
|
|
||||
|
|
btrfs: Don't report (null) as autoreplacement source drive name
When replacing missing device, report drive name as <missing disk> for
consistency and to prevent NULL pointer dereferences.
Signed-off-by: Yauhen Kharuzhy <yauhen.kharuzhy@zavadatar.com>
|
|
||||
|
|
btrfs: Use hot spare autoreplacement for missing devices too
Auto-replace missing drives in degraded RAID after mounting using
existing 'global hotspare' functionality.
Signed-off-by: Yauhen Kharuzhy <yauhen.kharuzhy@zavadatar.com>
|
|
||||
|
|
btrfs: Don't start autoreplacement process at mounting at remounting stage
Don't start autoreplace process if filesystem still is not mounted or is in
remounting state. This needed to allow fixing degraded RAID
automatically after mounting.
Signed-off-by: Yauhen Kharuzhy <yauhen.kharuzhy@zavadatar.com>
|
|
||||
|
|
btrfs: Replace: report 'stuck' status if suspended replace cannot be resumed
For monitoring purposes it's useful to know that FS is in suspended
replace status but it cannot be resumed because of missing device. Add
status to REPLACE_CMD_STATUS ioctl() handler.
Signed-off-by: Yauhen Kharuzhy <yauhen.kharuzhy@zavadatar.com>
|
|
||||
|
|
btrfs: Set mutually_exclusive_operation_running flag at auto replace start
At autoreplace start, set a fs_info->mutually_exclusive_operation_running
flag to prevent some race conditions and side effects as this done by
manual replace start routines.
Signed-off-by: Yauhen Kharuzhy <yauhen.kharuzhy@zavadatar.com>
|
|
||||
|
|
btrfs: Export FS state and devices counters in FS_INFO ioctl
For better understanding of current FS state and displaying this to
user, btrfs-progs neeed to know some additional info.
Add FS state and devices counters to the FS_INFO response (by using of
reserved fields, API remains backward compatible).
Signed-off-by: Yauhen Kharuzhy <yauhen.kharuzhy@zavadatar.com>
|
|
||||
|
|
btrfs: Report 'missing' name for missing devices
If device had btrfs FS sometime in past, was scanned and wiped after
this, then, if FS is mounted (as degraded RAID, for instance),
device is shown in 'btfrs filesystem show' output as good device
with its old name, and no missing devices are mentioned.
Pass 'missing' as missing device name to avoiding this.
Signed-off-by: Yauhen Kharuzhy <yauhen.kharuzhy@zavadatar.com>
|
|
||||
|
|
btrfs: Fix kernel crashing at device autoreplace
Don't free block device at btrfs device closing because it is used after
for completing current transaction in btrfs_dev_replace_start_v2().
If bdev is closed at autoreplacing, kernel crashes:
[ 561.554135] NULL pointer dereference at 00000000000003c8
[ 561.567986] IP: [<ffffffff812a2c44>] generic_make_request_checks+0x34/0x500
[ 561.573242] PGD 0
[ 561.575359] Oops: 0000 [#2] SMP
[ 561.578…
|
|
||||
|
|
btrfs: Disable btrfs_check_degradable() check in btrfs_force_device_close() until it will be implemented
Signed-off-by: Yauhen Kharuzhy <yauhen.kharuzhy@zavadatar.com>
|
|
||||
|
|
Make compilable
|
|
||||
Anand Jain
|
btrfs: check for failed device and hot replace
This patch creates casualty_kthread to check for the failed
devices, and triggers device replace.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
|
|
||||
|
Anand Jain
|
btrfs: introduce helper functions to perform hot replace
Hot replace / auto replace is important volume manager feature
and is critical to the data center operations, so that the degraded
volume can be brought back to a healthy state at the earliest and
without manual intervention.
This modifies the existing replace code to suite the need of auto
replace, in the long run I hope both the codes to be merged.
Signed-off-by: Anand Jain <anand.jain@oracle.…
|
|
||||
|
Anand Jain
|
btrfs: provide framework to get and put a spare device
This adds functions to get and put a spare device from the list.
So that hot repace code can pick a spare device when needed.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
|
|
||||
|
Anand Jain
|
btrfs: support btrfs dev scan for spare device
When the user or system calls the BTRFS_IOC_SCAN_DEV,
ioctl this patch will make sure it is added to the device
list and set it as spare.
This operation will be same when BTRFS_IOC_DEVICES_READY
as well since BTRFS_IOC_DEVICES_READY ioctl has been doing
that by legacy.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
|
|
||||
|
Anand Jain
|
btrfs: add check not to mount a spare device
Spare devices can be scanned but shouldn't be mountable.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
|
|
||||
|
Anand Jain
|
btrfs: introduce BTRFS_FEATURE_INCOMPAT_SPARE_DEV
Add BTRFS_FEATURE_INCOMPAT_SPARE_DEV (400) flag to identify
a spare device.
Along with this it checks in the mount context that a spare
device will fail to mount. As spare devices aren't mountable.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
|
|
||||
|
Anand Jain
|
btrfs: block incompatible optional features at scan
For the matter of completeness we need to check if the device
being scanned has features that are known to the kernel. As of
now if it doesn't - the mount will fails, then what is the point
in having those devices added to the btrfs_fs_devices list at
device_list_add().
So block those devices at scan. Which means the original block at
open_ctee() won't reach in case of device with unsupported fea…
|
|
||||
|
Anand Jain
|
btrfs: check device for critical errors and mark failed
Write and Flush errors are considered as critical errors,
upon which the device will be brought offline and marked as
failed. Write and Flush errors are identified using device
error statistics.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
|
|
||||
|
Anand Jain
|
btrfs: introduce device dynamic state transition to offline or failed
Need device forced offline/failed feature for the following reasons,
1) a. it can be reported that device has failed when it does
b. close the device when it goes offline so that blocklayer can
cleanup
2) identify the candidate for the auto replace
3) avoid further commit error reported against the failing device and
4) a device in the multi device btrfs may go offline from the system
…
|
|
||||
|
Anand Jain
|
Btrfs: create a framework to create pool attributes
We need fsid kobject to hold pool attributes however
its created only when fs is mounted. So, this patch
changes the life cycle of the fsid and devices kobjects
/sys/fs/btrfs/<fsid> and /sys/fs/btrfs/<fsid>/devices,
from created and destroyed by mount and unmount event
to created and destroyed by scanned and module-unload
events respectively.
However this does not alter life cycle of fs attribute…
|
|
||||
|
Anand Jain
|
Btrfs: sysfs: support seed devices in the sysfs layout
This adds an enhancement to show the seed fsid and its devices
on the btrfs sysfs.
The way sprouting handles fs_devices:
clone seed fs_devices and add to the fs_uuids
mem copy seed fs_devices and assign to fs_devices->seed (move dev_list)
evacuate seed fs_devices contents to hold sprout fs devices contents
So to be inline with this fs_devices changes during seeding,
represe…
|
|
||||
|
Anand Jain
|
btrfs: create a helper function to read the disk super
A part of code from btrfs_scan_one_device() is moved to a new function
btrfs_read_disk_super(), so that former function looks cleaner. (In this
process it also moves the code which ensures null terminating label). So
this creates easy opportunity to merge various duplicate codes on read
disk super. Earlier attempt to merge duplicate codes highlighted that
there were some issues for which there are…
|
|
||||
|
Greg Kroah-Hartman
|
Linux 4.4.5
|
|
||||
|
Alex Deucher
|
drm/amdgpu: fix topaz/tonga gmc assignment in 4.4 stable
When upstream commit 429c45deae6e57f1bb91bfb05b671063fb0cef60
was applied to 4.4 as d60703ca942e8d044d61360bc9792fcab54b95d0
it applied incorrectly to the tonga_ip_blocks array rather than
the topaz_ip_blocks array. Fix that up here.
Bug:
https://bugzilla.kernel.org/show_bug.cgi?id=113951
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoun…
|
|
||||
|
Rusty Russell
|
modules: fix longstanding /proc/kallsyms vs module insertion race.
commit 8244062ef1e54502ef55f54cced659913f244c3e upstream.
For CONFIG_KALLSYMS, we keep two symbol tables and two string tables.
There's one full copy, marked SHF_ALLOC and laid out at the end of the
module's init section. There's also a cut-down version that only
contains core symbols and strings, and lives in the module's core
section.
After module init (and before we free the module memory), …
|
|
||||
|
Gerd Hoffmann
|
drm/i915: refine qemu south bridge detection
commit f2e305108faba0c85eb4ba4066599decb675117e upstream.
The test for the qemu q35 south bridge added by commit
"39bfcd52 drm/i915: more virtual south bridge detection"
also matches on real hardware. Having the check for
virtual systems last in the list is not enough to avoid
that ...
Refine the check by additionally verifying the pci
subsystem id to see whenever it *really* is qemu.
[ v2: fi…
|
|
||||
|
Gerd Hoffmann
|
drm/i915: more virtual south bridge detection
commit 39bfcd5235e07e95ad3e70eab8e0b85db181de9e upstream.
Commit "30c964a drm/i915: Detect virtual south bridge" detects and
handles the southbridge emulated by vmware esx. Add the ich9 south
bridge emulated by 'qemu -M q35'.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
||||
|
Ming Lei
|
block: get the 1st and last bvec via helpers
commit 25e71a99f10e444cd00bb2ebccb11e1c9fb672b1 upstream.
This patch applies the two introduced helpers to
figure out the 1st and last bvec, and fixes the
original way after bio splitting.
Reported-by: Sagi Grimberg <sagig@dev.mellanox.co.il>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by:…
|
|
||||
|
Ming Lei
|
block: check virt boundary in bio_will_gap()
commit e0af29171aa8912e1ca95023b75ef336cd70d661 upstream.
In the following patch, the way for figuring out
the last bvec will be changed with a bit cost introduced,
so return immediately if the queue doesn't have virt
boundary limit. Actually most of devices have not
this limit.
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <m…
|
|
||||
|
Michel Dänzer
|
drm/amdgpu: Use drm_calloc_large for VM page_tables array
commit 9571e1d84042f5670df9fabdcbe7dd5da3abe43e upstream.
It can be big, depending on the VM address space size, which is tunable
via the vm_size module parameter.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93721
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-…
|
|
||||
|
Javi Merino
|
thermal: cpu_cooling: fix out of bounds access in time_in_idle
commit a53b8394ec3c67255928df6ee9cc99dd1cd452e3 upstream.
In __cpufreq_cooling_register() we allocate the arrays for time_in_idle
and time_in_idle_timestamp to be as big as the number of cpus in this
cpufreq device. However, in get_load() we access this array using the
cpu number as index, which can result in an out of bound access.
Index time_in_idle{,_timestamp} using the index in the cpufreq…
|
|
||||
|
Wolfram Sang
|
i2c: brcmstb: allocate correct amount of memory for regmap
commit 7314d22a2f5bd40468d57768be368c3d9b4bd726 upstream.
We want the size of the struct, not of a pointer to it. To be future
proof, just dereference the pointer to get the desired type.
Fixes: dd1aa2524bc5 ("i2c: brcmstb: Add Broadcom settop SoC i2c controller driver")
Acked-by: Gregory Fong <gregory.0xf0@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Kamal Dasu <kda…
|
|
||||
|
Richard Weinberger
|
ubi: Fix out of bounds write in volume update code
commit e4f6daac20332448529b11f09388f1d55ef2084c upstream.
ubi_start_leb_change() allocates too few bytes.
ubi_more_leb_change_data() will write up to req->upd_bytes +
ubi->min_io_size bytes.
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
||||
|
Frederic Barrat
|
cxl: Fix PSL timebase synchronization detection
commit 923adb1646d5ba739d2a1e63ee20d60574d9da8e upstream.
The PSL timebase synchronization is seemingly failing for
configuration not including VIRT_CPU_ACCOUNTING_NATIVE. The driver
shows the following trace in dmesg:
PSL: Timebase sync: giving up!
The PSL timebase register is actually syncing correctly, but the cxl
driver is not detecting it. Fix is to use the proper timebase-to-time
conversio…
|
|
||||
|
Maciej W. Rozycki
|
MIPS: traps: Fix SIGFPE information leak from `do_ov' and `do_trap_or_bp'
commit e723e3f7f9591b79e8c56b3d7c5a204a9c571b55 upstream.
Avoid sending a partially initialised `siginfo_t' structure along SIGFPE
signals issued from `do_ov' and `do_trap_or_bp', leading to information
leaking from the kernel stack.
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
||||
|
Govindraj Raja
|
MIPS: scache: Fix scache init with invalid line size.
commit 56fa81fc9a5445938f3aa2e63d15ab63dc938ad6 upstream.
In current scache init cache line_size is determined from
cpu config register, however if there there no scache
then mips_sc_probe_cm3 function populates a invalid line_size of 2.
The invalid line_size can cause a NULL pointer deference
during r4k_dma_cache_inv as r4k_blast_scache is populated
based on line_size. Scache line_size of 2 is …
|
|
||||
|
|
USB: serial: option: add support for Quectel UC20
commit c0992d0f54847d0d1d85c60fcaa054f175ab1ccd upstream.
Add support for Quectel UC20 and blacklist the QMI interface.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
[johan: amend commit message ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
||||
|
|
USB: serial: option: add support for Telit LE922 PID 0x1045
commit 5deef5551c77e488922cc4bf4bc76df63be650d0 upstream.
This patch adds support for 0x1045 PID of Telit LE922.
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
||||
|
Bjørn Mork
|
USB: qcserial: add Sierra Wireless EM74xx device ID
commit 04fdbc825ffc02fb098964b92de802fff44e73fd upstream.
The MC74xx and EM74xx modules use different IDs by default, according
to the Lenovo EM7455 driver for Windows.
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
||||
|
Patrik Halfar
|
USB: qcserial: add Dell Wireless 5809e Gobi 4G HSPA+ (rev3)
commit 013dd239d6220a4e0dfdf0d45a82c34f1fd73deb upstream.
New revision of Dell Wireless 5809e Gobi 4G HSPA+ Mobile Broadband Card
has new idProduct.
Bus 002 Device 006: ID 413c:81b3 Dell Computer Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPac…
|
|
||||
|
|
USB: cp210x: Add ID for Parrot NMEA GPS Flight Recorder
commit 3c4c615d70c8cbdc8ba8c79ed702640930652a79 upstream.
The Parrot NMEA GPS Flight Recorder is a USB composite device
consisting of hub, flash storage, and cp210x usb to serial chip.
It is an accessory to the mass-produced Parrot AR Drone 2.
The device emits standard NMEA messages which make the it compatible
with NMEA compatible software. It was tested using gpsd version 3.11-3
as an NMEA inte…
|
|
||||
|
Peter Chen
|
usb: chipidea: otg: change workqueue ci_otg as freezable
commit d144dfea8af7108f613139623e63952ed7e69c0c upstream.
If we use USB ID pin as wakeup source, and there is a USB block
device on this USB OTG (ID) cable, the system will be deadlock
after system resume.
The root cause for this problem is: the workqueue ci_otg may try
to remove hcd before the driver resume has finished, and hcd will
disconnect the device on it, then, it will call device_releas…
|
|
||||
|
Takashi Iwai
|
ALSA: timer: Fix broken compat timer user status ioctl
commit 3a72494ac2a3bd229db941d51e7efe2f6ccd947b upstream.
The timer user status compat ioctl returned the bogus struct used for
64bit architectures instead of the 32bit one. This patch addresses
it to return the proper struct.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
||||
|
Takashi Iwai
|
ALSA: hdspm: Fix zero-division
commit c1099c3294c2344110085a38c50e478a5992b368 upstream.
HDSPM driver contains a code issuing zero-division potentially in
system sample rate ctl code. This patch fixes it by not processing
a zero or invalid rate value as a divisor, as well as excluding the
invalid value to be passed via the given ctl element.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregk…
|
|
||||
|
Takashi Iwai
|
ALSA: hdsp: Fix wrong boolean ctl value accesses
commit eab3c4db193f5fcccf70e884de9a922ca2c63d80 upstream.
snd-hdsp driver accesses enum item values (int) instead of boolean
values (long) wrongly for some ctl elements. This patch fixes them.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
||||
|
Takashi Iwai
|
ALSA: hdspm: Fix wrong boolean ctl value accesses
commit 537e48136295c5860a92138c5ea3959b9542868b upstream.
snd-hdspm driver accesses enum item values (int) instead of boolean
values (long) wrongly for some ctl elements. This patch fixes them.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
||||
|
Takashi Iwai
|
ALSA: seq: oss: Don't drain at closing a client
commit 197b958c1e76a575d77038cc98b4bebc2134279f upstream.
The OSS sequencer client tries to drain the pending events at
releasing. Unfortunately, as spotted by syzkaller fuzzer, this may
lead to an unkillable process state when the event has been queued at
the far future. Since the process being released can't be signaled
any longer, it remains and waits for the echo-back event in that far
futu…
|
|
||||
|
Takashi Iwai
|
ALSA: pcm: Fix ioctls for X32 ABI
commit 513ace79b657e2022a592e77f24074e088681ecc upstream.
X32 ABI uses the 64bit timespec in addition to 64bit alignment of
64bit values. This leads to incompatibilities in some PCM ioctls
involved with snd_pcm_channel_info, snd_pcm_status and
snd_pcm_sync_ptr structs. Fix the PCM compat ABI for these ioctls
like the previous commit for ctl API.
Reported-by: Steven Newbury <steve@snewbury.org.…
|
|
||||
|
Takashi Iwai
|
ALSA: timer: Fix ioctls for X32 ABI
commit b24e7ad1fdc22177eb3e51584e1cfcb45d818488 upstream.
X32 ABI takes the 64bit timespec, thus the timer user status ioctl becomes
incompatible with IA32. This results in NOTTY error when the ioctl is
issued.
Meanwhile, this struct in X32 is essentially identical with the one in
X86-64, so we can just bypassing to the existing code for this
specific compat ioctl.
Signed-off-by: Takashi Iwai …
|
|
||||
|
Takashi Iwai
|
ALSA: rawmidi: Fix ioctls X32 ABI
commit 2251fbbc1539f05b0b206b37a602d5776be37252 upstream.
Like the previous fixes for ctl and PCM, we need a fix for
incompatible X32 ABI regarding the rawmidi: namely, struct
snd_rawmidi_status has the timespec, and the size and the alignment on
X32 differ from IA32.
This patch fixes the incompatible ioctl for X32.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <…
|
|
||||
|
Simon South
|
ALSA: hda - Fix mic issues on Acer Aspire E1-472
commit 02322ac9dee9aff8d8862e8d6660ebe102f492ea upstream.
This patch applies the microphone-related fix created for the Acer
Aspire E1-572 to the E1-472 as well, as it uses the same Realtek ALC282
CODEC and demonstrates the same issues.
This patch allows an external, headset microphone to be used and limits
the gain on the (quite noisy) internal microphone.
Signed-off-by: Simon South <simon@sim…
|
|
||||
|
Takashi Iwai
|
ALSA: ctl: Fix ioctls for X32 ABI
commit 6236d8bb2afcfe71b88ecea554e0dc638090a45f upstream.
The X32 ABI takes the same alignment like x86-64, and this may result
in the incompatible struct size from ia32. Unfortunately, we hit this
in some control ABI: struct snd_ctl_elem_value differs between them
due to the position of 64bit variable array. This ends up with the
unknown ioctl (ENOTTY) error.
The fix is to add the compat entr…
|
|
||||
|
Dennis Kadioglu
|
ALSA: usb-audio: Add a quirk for Plantronics DA45
commit 17e2df4613be57d0fab68df749f6b8114e453152 upstream.
Plantronics DA45 does not support reading the sample rate which leads
to many lines of "cannot get freq at ep 0x4" and "cannot get freq at
ep 0x84". This patch adds the USB ID of the DA45 to quirks.c and
avoids those error messages.
Signed-off-by: Dennis Kadioglu <denk@post.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: G…
|
|
||||
|
Hans Verkuil
|
adv7604: fix tx 5v detect regression
commit 0ba4581c84cfb39fd527f6b3457f1c97f6356c04 upstream.
The 5 volt detect functionality broke in 3.14: the code reads IO register 0x70
again after it has already been cleared. Instead it should use the cached
irq_reg_0x70 value and the io_write to 0x71 to clear 0x70 can be dropped since
this has already been done.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carval…
|
|
||||
|
Robert Jarzmik
|
dmaengine: pxa_dma: fix cyclic transfers
commit f16921275cc3c2442d0b95225785a601603b990f upstream.
While testing audio with pxa2xx-ac97, underrun were happening while the
user application was correctly feeding the music. Debug proved that the
cyclic transfer is not cyclic, ie. the last descriptor did not loop on
the first.
Another issue is that the descriptor length was always set to 8192,
because of an trivial operator issue.
This wa…
|
|
||||
|
David Woodhouse
|
Fix directory hardlinks from deleted directories
commit be629c62a603e5935f8177fd8a19e014100a259e upstream.
When a directory is deleted, we don't take too much care about killing off
all the dirents that belong to it — on the basis that on remount, the scan
will conclude that the directory is dead anyway.
This doesn't work though, when the deleted directory contained a child
directory which was moved *out*. In the early stages of the fs build
w…
|
|
||||
|
David Woodhouse
|
jffs2: Fix page lock / f->sem deadlock
commit 49e91e7079febe59a20ca885a87dd1c54240d0f1 upstream.
With this fix, all code paths should now be obtaining the page lock before
f->sem.
Reported-by: Szabó Tamás <sztomi89@gmail.com>
Tested-by: Thomas Betker <thomas.betker@rohde-schwarz.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
||||
|
Thomas Betker
|
Revert "jffs2: Fix lock acquisition order bug in jffs2_write_begin"
commit 157078f64b8a9cd7011b6b900b2f2498df850748 upstream.
This reverts commit 5ffd3412ae55
("jffs2: Fix lock acquisition order bug in jffs2_write_begin").
The commit modified jffs2_write_begin() to remove a deadlock with
jffs2_garbage_collect_live(), but this introduced new deadlocks found
by multiple users. page_lock() actually has to be called before
mutex_lock(&c->alloc_sem) or mutex_lock(&f-…
|
|
||||
|
Filipe Manana
|
Btrfs: fix loading of orphan roots leading to BUG_ON
commit 909c3a22da3b8d2cfd3505ca5658f0176859d400 upstream.
When looking for orphan roots during mount we can end up hitting a
BUG_ON() (at root-item.c:btrfs_find_orphan_roots()) if a log tree is
replayed and qgroups are enabled. This is because after a log tree is
replayed, a transaction commit is made, which triggers qgroup extent
accounting which in turn does backref walking which ends up readin…
|
|
||||
|
|
pata-rb532-cf: get rid of the irq_to_gpio() call
commit 018361767a21fb2d5ebd3ac182c04baf8a8b4e08 upstream.
The RB532 platform specific irq_to_gpio() implementation has been
removed with commit 832f5dacfa0b ("MIPS: Remove all the uses of
custom gpio.h"). Now the platform uses the generic stub which causes
the following error:
pata-rb532-cf pata-rb532-cf: no GPIO found for irq149
pata-rb532-cf: probe of pata-rb532-cf failed with error -2
Dr…
|
|
||||
|
Steven Rostedt (Red Hat)
|
tracing: Do not have 'comm' filter override event 'comm' field
commit e57cbaf0eb006eaa207395f3bfd7ce52c1b5539c upstream.
Commit 9f61668073a8d "tracing: Allow triggers to filter for CPU ids and
process names" added a 'comm' filter that will filter events based on the
current tasks struct 'comm'. But this now hides the ability to filter events
that have a 'comm' field too. For example, sched_migrate_task trace event.
That has a 'comm' field of the task to be m…
|
|
||||
|
Manuel Lauss
|
ata: ahci: don't mark HotPlugCapable Ports as external/removable
commit dc8b4afc4a04fac8ee55a19b59f2356a25e7e778 upstream.
The HPCP bit is set by bioses for on-board sata ports either because
they think sata is hotplug capable in general or to allow Windows
to display a "device eject" icon on ports which are routed to an
external connector bracket.
However in Redhat Bugzilla #1310682, users report that with kernel 4.4,
where this bit test first appeared, a lo…
|
|
||||
|
Todd E Brandt
|
PM / sleep / x86: Fix crash on graph trace through x86 suspend
commit 92f9e179a702a6adbc11e2fedc76ecd6ffc9e3f7 upstream.
Pause/unpause graph tracing around do_suspend_lowlevel as it has
inconsistent call/return info after it jumps to the wakeup vector.
The graph trace buffer will otherwise become misaligned and
may eventually crash and hang on suspend.
To reproduce the issue and test the fix:
Run a function_graph trace over suspend/resume and set the graph
…
|
|
||||
|
Ard Biesheuvel
|
arm64: vmemmap: use virtual projection of linear region
commit dfd55ad85e4a7fbaa82df12467515ac3c81e8a3e upstream.
Commit dd006da21646 ("arm64: mm: increase VA range of identity map") made
some changes to the memory mapping code to allow physical memory to reside
at an offset that exceeds the size of the virtual mapping.
However, since the size of the vmemmap area is proportional to the size of
the VA area, but it is populated relative to the physical…
|
|
||||
|
Alexandra Yates
|
Adding Intel Lewisburg device IDs for SATA
commit f5bdd66c705484b4bc77eb914be15c1b7881fae7 upstream.
This patch complements the list of device IDs previously
added for lewisburg sata.
Signed-off-by: Alexandra Yates <alexandra.yates@linux.intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
||||
|
Tejun Heo
|
writeback: flush inode cgroup wb switches instead of pinning super_block
commit a1a0e23e49037c23ea84bc8cc146a03584d13577 upstream.
If cgroup writeback is in use, inodes can be scheduled for
asynchronous wb switching. Before 5ff8eaac1636 ("writeback: keep
superblock pinned during cgroup writeback association switches"), this
could race with umount leading to super_block being destroyed while
inodes are pinned for wb switching. 5ff8eaac1636 fixed it by bumping
s_activ…
|
|
||||
|
Ming Lei
|
block: bio: introduce helpers to get the 1st and last bvec
commit 7bcd79ac50d9d83350a835bdb91c04ac9e098412 upstream.
The bio passed to bio_will_gap() may be fast cloned from upper
layer(dm, md, bcache, fs, ...), or from bio splitting in block
core.
Unfortunately bio_will_gap() just figures out the last bvec via
'bi_io_vec[prev->bi_vcnt - 1]' directly, and this way is obviously
wrong.
This patch introduces two helpers for getting the first and last
bvec…
|
|
||||
|
Harvey Hunt
|
libata: Align ata_device's id on a cacheline
commit 4ee34ea3a12396f35b26d90a094c75db95080baa upstream.
The id buffer in ata_device is a DMA target, but it isn't explicitly
cacheline aligned. Due to this, adjacent fields can be overwritten with
stale data from memory on non coherent architectures. As a result, the
kernel is sometimes unable to communicate with an ATA device.
Fix this by ensuring that the id buffer is cacheline aligned.
Thi…
|
|
||||
|
Arnd Bergmann
|
libata: fix HDIO_GET_32BIT ioctl
commit 287e6611ab1eac76c2c5ebf6e345e04c80ca9c61 upstream.
As reported by Soohoon Lee, the HDIO_GET_32BIT ioctl does not
work correctly in compat mode with libata.
I have investigated the issue further and found multiple problems
that all appeared with the same commit that originally introduced
HDIO_GET_32BIT handling in libata back in linux-2.6.8 and presumably
also linux-2.4, as the code uses "…
|
|
||||
|
Arindam Nath
|
drm/amdgpu: return from atombios_dp_get_dpcd only when error
commit 0b39c531cfa12dad54eac238c2e303b994df1ef7 upstream.
In amdgpu_connector_hotplug(), we need to start DP link
training only after we have received DPCD. The function
amdgpu_atombios_dp_get_dpcd() returns non-zero value only
when an error condition is met, otherwise returns zero.
So in case the function encounters an error, we need to
skip rest of the code and return from amdgpu_connector_hotp…
|
|
||||
|
Chunming Zhou
|
drm/amdgpu/gfx8: specify which engine to wait before vm flush
commit 9cac537332f5502c103415b25609548c276a09f8 upstream.
Select between me and pfp properly.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
||||
|
Christian König
|
drm/amdgpu: apply gfx_v8 fixes to gfx_v7 as well
commit feebe91aa9a9d99d9ec157612a614fadb79beb99 upstream.
We never ported that back to CIK, so we could run into VM faults here.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
||||
|
Alex Deucher
|
drm/amdgpu/pm: update current crtc info after setting the powerstate
commit eda1d1cf8d18383f19cd2b752f786120efa4768f upstream.
On CI, we need to see if the number of crtcs changes to determine
whether or not we need to upload the mclk table again. In practice
we don't currently upload the mclk table again after the initial load.
The only reason you would would be to add new states, e.g., for
arbitrary mclk setting which is not currently supported.
Acked-by: Jord…
|
|
||||
|
Alex Deucher
|
drm/radeon/pm: update current crtc info after setting the powerstate
commit 5e031d9fe8b0741f11d49667dfc3ebf5454121fd upstream.
On CI, we need to see if the number of crtcs changes to determine
whether or not we need to upload the mclk table again. In practice
we don't currently upload the mclk table again after the initial load.
The only reason you would would be to add new states, e.g., for
arbitrary mclk setting which is not currently supported.
Acked-by: Chri…
|
|
||||
|
Timothy Pearson
|
drm/ast: Fix incorrect register check for DRAM width
commit 2d02b8bdba322b527c5f5168ce1ca10c2d982a78 upstream.
During DRAM initialization on certain ASpeed devices, an incorrect
bit (bit 10) was checked in the "SDRAM Bus Width Status" register
to determine DRAM width.
Query bit 6 instead in accordance with the Aspeed AST2050 datasheet v1.05.
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Signed-off-by: Dave Airlie <airlied@red…
|
|
||||
|
Mike Christie
|
target: Fix WRITE_SAME/DISCARD conversion to linux 512b sectors
commit 8a9ebe717a133ba7bc90b06047f43cc6b8bcb8b3 upstream.
In a couple places we are not converting to/from the Linux
block layer 512 bytes sectors.
1.
The request queue values and what we do are a mismatch of
things:
max_discard_sectors - This is in linux block layer 512 byte
sectors. We are just copying this to max_unmap_lba_count.
discard_granularity - This is in bytes. We are converting it…
|
|
||||
|
Joerg Roedel
|
iommu/vt-d: Use BUS_NOTIFY_REMOVED_DEVICE in hotplug path
commit e6a8c9b337eed56eb481e1b4dd2180c25a1e5310 upstream.
In the PCI hotplug path of the Intel IOMMU driver, replace
the usage of the BUS_NOTIFY_DEL_DEVICE notifier, which is
executed before the driver is unbound from the device, with
BUS_NOTIFY_REMOVED_DEVICE, which runs after that.
This fixes a kernel BUG being triggered in the VT-d code
when the device driver tries to unmap DMA buffers and th…
|
|
||||
|
Suravee Suthikulpanit
|
iommu/amd: Fix boot warning when device 00:00.0 is not iommu covered
commit 38e45d02ea9f194b89d6bf41e52ccafc8e2c2b47 upstream.
The setup code for the performance counters in the AMD IOMMU driver
tests whether the counters can be written. It tests to setup a counter
for device 00:00.0, which fails on systems where this particular device
is not covered by the IOMMU.
Fix this by not relying on device 00:00.0 but only on the IOMMU being
present.
Signed-off-by: Surav…
|
|
||||
|
Jay Cornwall
|
iommu/amd: Apply workaround for ATS write permission check
commit 358875fd52ab8f00f66328cbf1a1d2486f265829 upstream.
The AMD Family 15h Models 30h-3Fh (Kaveri) BIOS and Kernel Developer's
Guide omitted part of the BIOS IOMMU L2 register setup specification.
Without this setup the IOMMU L2 does not fully respect write permissions
when handling an ATS translation request.
The IOMMU L2 will set PTE dirty bit when handling an ATS translation with
write perm…
|
|
||||
|
Michael S. Tsirkin
|
arm/arm64: KVM: Fix ioctl error handling
commit 4cad67fca3fc952d6f2ed9e799621f07666a560f upstream.
Calling return copy_to_user(...) in an ioctl will not
do the right thing if there's a pagefault:
copy_to_user returns the number of bytes not copied
in this case.
Fix up kvm to do
return copy_to_user(...)) ? -EFAULT : 0;
everywhere.
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.…
|
|
||||
|
Paolo Bonzini
|
KVM: x86: fix root cause for missed hardware breakpoints
commit 70e4da7a8ff62f2775337b705f45c804bb450454 upstream.
Commit 172b2386ed16 ("KVM: x86: fix missed hardware breakpoints",
2016-02-10) worked around a case where the debug registers are not loaded
correctly on preemption and on the first entry to KVM_RUN.
However, Xiao Guangrong pointed out that the root cause must be that
KVM_DEBUGREG_BP_ENABLED is not being set correctly. This can indeed
hap…
|
|
||||
|
Michael S. Tsirkin
|
vfio: fix ioctl error handling
commit 8160c4e455820d5008a1116d2dca35f0363bb062 upstream.
Calling return copy_to_user(...) in an ioctl will not
do the right thing if there's a pagefault:
copy_to_user returns the number of bytes not copied
in this case.
Fix up vfio to do
return copy_to_user(...)) ?
-EFAULT : 0;
everywhere.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@re…
|
|
||||
|
Yadan Fan
|
Fix cifs_uniqueid_to_ino_t() function for s390x
commit 1ee9f4bd1a97026a7b2d7ae9f1f74b45680d0003 upstream.
This issue is caused by commit 02323db17e3a7 ("cifs: fix
cifs_uniqueid_to_ino_t not to ever return 0"), when BITS_PER_LONG
is 64 on s390x, the corresponding cifs_uniqueid_to_ino_t()
function will cast 64-bit fileid to 32-bit by using (ino_t)fileid,
because ino_t (typdefed __kernel_ino_t) is int type.
It's defined in arch/s390/include/uapi…
|
|
||||
|
Pavel Shilovsky
|
CIFS: Fix SMB2+ interim response processing for read requests
commit 6cc3b24235929b54acd5ecc987ef11a425bd209e upstream.
For interim responses we only need to parse a header and update
a number credits. Now it is done for all SMB2+ command except
SMB2_READ which is wrong. Fix this by adding such processing.
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Tested-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <smfrench@…
|
|
||||
|
Justin Maggard
|
cifs: fix out-of-bounds access in lease parsing
commit deb7deff2f00bdbbcb3d560dad2a89ef37df837d upstream.
When opening a file, SMB2_open() attempts to parse the lease state from the
SMB2 CREATE Response. However, the parsing code was not careful to ensure
that the create contexts are not empty or invalid, which can lead to out-
of-bounds memory access. This can be seen easily by trying
to read a file from a OSX 10.11 SMB3 server. Here is sa…
|
|
||||
|
Jean-Philippe Brucker
|
fbcon: set a default value to blink interval
commit a1e533ec07d583d01349ef13c0c965b8633e1b91 upstream.
Since commit 27a4c827c34ac4256a190cc9d24607f953c1c459
fbcon: use the cursor blink interval provided by vt
two attempts have been made at fixing a possible hang caused by
cursor_timer_handler. That function registers a timer to be triggered at
"jiffies + fbcon_ops.cur_blink_jiffies".
A new case had been encountered during initialisation …
|
|
||||
|
Owen Hofmann
|
kvm: x86: Update tsc multiplier on change.
commit 2680d6da455b636dd006636780c0f235c6561d70 upstream.
vmx.c writes the TSC_MULTIPLIER field in vmx_vcpu_load, but only when a
vcpu has migrated physical cpus. Record the last value written and
update in vmx_vcpu_load on any change, otherwise a cpu migration must
occur for TSC frequency scaling to take effect.
Fixes: ff2c3a1803775cc72dc6f624b59554956396b0ee
Signed-off-by: Owen Hofmann <osh@go…
|
|
||||
|
Michael S. Tsirkin
|
mips/kvm: fix ioctl error handling
commit 0178fd7dcc4451fcb90bec5e91226586962478d2 upstream.
Returning directly whatever copy_to_user(...) or copy_from_user(...)
returns may not do the right thing if there's a pagefault:
copy_to_user/copy_from_user return the number of bytes not copied in
this case, but ioctls need to return -EFAULT instead.
Fix up kvm on mips to do
return copy_to_user(...)) ? -EFAULT : 0;
and
return copy_from…
|
|
||||
|
Helge Deller
|
parisc: Fix ptrace syscall number and return value modification
commit 98e8b6c9ac9d1b1e9d1122dfa6783d5d566bb8f7 upstream.
Mike Frysinger reported that his ptrace testcase showed strange
behaviour on parisc: It was not possible to avoid a syscall and the
return value of a syscall couldn't be changed.
To modify a syscall number, we were missing to save the new syscall
number to gr20 which is then picked up later in assembly again.
The effect that the return v…
|
|
||||
|
Murali Karicheri
|
PCI: keystone: Fix MSI code that retrieves struct pcie_port pointer
commit 79e3f4a853ed161cd4c06d84b50beebf961a47c6 upstream.
Commit cbce7900598c ("PCI: designware: Make driver arch-agnostic") changed
the host bridge sysdata pointer from the ARM pci_sys_data to the DesignWare
pcie_port structure, and changed pcie-designware.c to reflect that. But it
did not change the corresponding code in pci-keystone-dw.c, so it caused
crashes on Keystone:
Unable to handle …
|
|
||||
|
Keith Busch
|
block: Initialize max_dev_sectors to 0
commit 5f009d3f8e6685fe8c6215082c1696a08b411220 upstream.
The new queue limit is not used by the majority of block drivers, and
should be initialized to 0 for the driver's requested settings to be used.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@ls…
|
|
||||
|
|
drm/amdgpu: mask out WC from BO on unsupported arches
commit a187f17f0e15a046aa5d7263b35df55230d92779 upstream.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
||||
|
Qu Wenruo
|
btrfs: async-thread: Fix a use-after-free error for trace
commit 0a95b851370b84a4b9d92ee6d1fa0926901d0454 upstream.
Parameter of trace_btrfs_work_queued() can be freed in its workqueue.
So no one use use that pointer after queue_work().
Fix the user-after-free bug by move the trace line before queue_work().
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
…
|
|
||||
|
Zhao Lei
|
btrfs: Fix no_space in write and rm loop
commit e1746e8381cd2af421f75557b5cae3604fc18b35 upstream.
I see no_space in v4.4-rc1 again in xfstests generic/102.
It happened randomly in some node only.
(one of 4 phy-node, and a kvm with non-virtio block driver)
By bisect, we can found the first-bad is:
commit bdced438acd8 ("block: setup bi_phys_segments after splitting")'
But above patch only triggered the bug by making bio operation
faste…
|
|
||||
|
Filipe Manana
|
Btrfs: fix deadlock running delayed iputs at transaction commit time
commit c2d6cb1636d235257086f939a8194ef0bf93af6e upstream.
While running a stress test I ran into a deadlock when running the delayed
iputs at transaction time, which produced the following report and trace:
[ 886.399989] =============================================
[ 886.400871] [ INFO: possible recursive locking detected ]
[ 886.401663] 4.4.0-rc6-btrfs-next-18+ #1 Not tainted
[ 886.402384]…
|
|
||||
|
Geert Uytterhoeven
|
drivers: sh: Restore legacy clock domain on SuperH platforms
commit 0378ba4899d5fbd8494ed6580cbc81d7b44dbac6 upstream.
CONFIG_ARCH_SHMOBILE is not only enabled for Renesas ARM platforms
(which are DT based and multi-platform), but also on a select set of
Renesas SuperH platforms (SH7722/SH7723/SH7724/SH7343/SH7366). Hence
since commit 0ba58de231066e47 ("drivers: sh: Get rid of
CONFIG_ARCH_SHMOBILE_MULTI"), the legacy clock domain is no longer
installed on …
|
|
||||
|
Al Viro
|
use ->d_seq to get coherency between ->d_inode and ->d_flags
commit a528aca7f359f4b0b1d72ae406097e491a5ba9ea upstream.
Games with ordering and barriers are way too brittle. Just
bump ->d_seq before and after updating ->d_inode and ->d_flags
type bits, so that verifying ->d_seq would guarantee they are
coherent.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
||||
|
Greg Kroah-Hartman
|
Linux 4.4.4
|
|
||||
|
Luca Coelho
|
iwlwifi: mvm: don't allow sched scans without matches to be started
commit 5e56276e7555b34550d51459a801ff75eca8b907 upstream.
The firmware can perform a scheduled scan with not matchsets passed,
but it can't send notification that results were found. Since the
userspace then cannot know when we got new results and the firmware
wouldn't trigger a wake in case we are sleeping, it's better not to
allow scans without matchsets.
This fixes https://bugzilla.kernel.or…
|
|
||||
|
Oren Givon
|
iwlwifi: update and fix 7265 series PCI IDs
commit 006bda75d81fd27a583a3b310e9444fea2aa6ef2 upstream.
Update and fix some 7265 PCI IDs entries.
Signed-off-by: Oren Givon <oren.givon@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
||||
|
Emmanuel Grumbach
|
iwlwifi: pcie: properly configure the debug buffer size for 8000
commit 62d7476d958ce06d7a10b02bdb30006870286fe2 upstream.
8000 device family has a new debug engine that needs to be
configured differently than 7000's.
The debug engine's DMA works in chunks of memory and the
size of the buffer really means the start of the last
chunk. Since one chunk is 256-byte long, we should
configure the device to write to buffer_size - 256.
This fixes a situation were the …
|
|
||||
|
Emmanuel Grumbach
|
iwlwifi: dvm: fix WoWLAN
commit a1cdb1c59c8c203de2731fc6910598ed19c97e41 upstream.
My commit below introduced a mutex in the transport to
prevent concurrent operations. To do so, it added a flag
(is_down) to make sure the transport is in the right state.
This uncoverred an bug that didn't cause any harm until
now: iwldvm calls stop_device and then starts the firmware
without calling start_hw in between. While this flow i…
|
|
||||
|
|
security: let security modules use PTRACE_MODE_* with bitmasks
commit 3dfb7d8cdbc7ea0c2970450e60818bb3eefbad69 upstream.
It looks like smack and yama weren't aware that the ptrace mode
can have flags ORed into it - PTRACE_MODE_NOAUDIT until now, but
only for /proc/$pid/stat, and with the PTRACE_MODE_*CREDS patch,
all modes have flags ORed into them.
Signed-off-by: Jann Horn <jann@thejh.net>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Casey Schaufl…
|
|
||||
|
Matan Barak
|
IB/cma: Fix RDMA port validation for iWarp
commit 649367735ee5dedb128d9fac0b86ba7e0fe7ae3b upstream.
cma_validate_port wrongly assumed that Ethernet devices are RoCE
devices and thus their ndev should be matched in the GID table.
This broke the iWarp support. Fixing that matching the ndev only if
we work on a RoCE port.
Cc: <stable@vger.kernel.org> # 4.4.x-
Fixes: abae1b71dd37 ('IB/cma: cma_validate_port should verify the port
and…
|
|
||||
|
Thomas Gleixner
|
x86/irq: Plug vector cleanup race
commit 98229aa36caa9c769b13565523de9b813013c703 upstream.
We still can end up with a stale vector due to the following:
CPU0 CPU1 CPU2
lock_vector()
data->move_in_progress=0
sendIPI()
unlock_vector()
set_affinity()
assign_irq_vector()
lock_vector() h…
|
|
||||
|
Thomas Gleixner
|
x86/irq: Call irq_force_move_complete with irq descriptor
commit 90a2282e23f0522e4b3f797ad447c5e91bf7fe32 upstream.
First of all there is no point in looking up the irq descriptor again, but we
also need the descriptor for the final cleanup race fix in the next
patch. Make that change seperate. No functional difference.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Borislav Petkov <bp@alien8.de>
Tested-by: Joe Lawrence <joe.lawrence@st…
|
|
||||
|
Thomas Gleixner
|
x86/irq: Remove outgoing CPU from vector cleanup mask
commit 56d7d2f4bbd00fb198b7907cb3ab657d06115a42 upstream.
We want to synchronize new vector assignments with a pending cleanup. Remove a
dying cpu from a pending cleanup mask.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Borislav Petkov <bp@alien8.de>
Tested-by: Joe Lawrence <joe.lawrence@stratus.com>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Jeremiah Mahler <jmmahler@gmail…
|
|
||||
|
Thomas Gleixner
|
x86/irq: Remove the cpumask allocation from send_cleanup_vector()
commit 5da0c1217f05d2ccc9a8ed6e6e5c23a8a1d24dd6 upstream.
There is no need to allocate a new cpumask for sending the cleanup vector. The
old_domain mask is now protected by the vector_lock, so we can safely remove
the offline cpus from it and send the IPI with the resulting mask.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Borislav Petkov <bp@alien8.de>
Tested-by: Joe Lawrence…
|
|
||||
|
Thomas Gleixner
|
x86/irq: Clear move_in_progress before sending cleanup IPI
commit c1684f5035b60e9f98566493e869496fb5de1d89 upstream.
send_cleanup_vector() fiddles with the old_domain mask unprotected because it
relies on the protection by the move_in_progress flag. But this is fatal, as
the flag is reset after the IPI has been sent. So a cpu which receives the IPI
can still see the flag set and therefor ignores the cleanup request. If no
other cleanup request happens th…
|
|
||||
|
Thomas Gleixner
|
x86/irq: Remove offline cpus from vector cleanup
commit 847667ef10356b824a11c853fc8a8b1b437b6a8d upstream.
No point of keeping offline cpus in the cleanup mask.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Borislav Petkov <bp@alien8.de>
Tested-by: Joe Lawrence <joe.lawrence@stratus.com>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Jeremiah Mahler <jmmahler@gmail.com>
Cc: andy.shevchenko@gmail.com
Cc: Guenter Roeck <linux@roe…
|
|
||||
|
Thomas Gleixner
|
x86/irq: Get rid of code duplication
commit ab25ac02148b600e645f77cfb8b8ea415ed75bb4 upstream.
Reusing an existing vector and assigning a new vector has duplicated
code. Consolidate it.
This is also a preparatory patch for finally plugging the cleanup race.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Borislav Petkov <bp@alien8.de>
Tested-by: Joe Lawrence <joe.lawrence@stratus.com>
Cc: Jiang Liu <jiang.liu@linux.…
|
|
||||
|
Thomas Gleixner
|
x86/irq: Copy vectormask instead of an AND operation
commit 9ac15b7a8af4cf3337a101498c0ed690d23ade75 upstream.
In the case that the new vector mask is a subset of the existing mask there is
no point to do a AND operation of currentmask & newmask. The result is
newmask. So we can simply copy the new mask to the current mask and be done
with it. Preparatory patch for further consolidation.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-b…
|
|
||||
|
Thomas Gleixner
|
x86/irq: Check vector allocation early
commit 3716fd27a604d61a91cda47083504971486b80f1 upstream.
__assign_irq_vector() uses the vector_cpumask which is assigned by
apic->vector_allocation_domain() without doing basic sanity checks. That can
result in a situation where the final assignement of a newly found vector
fails in apic->cpu_mask_to_apicid_and(). So we have to do rollbacks for no
reason.
apic->cpu_mask_to_apicid_and() only fai…
|
|
||||
|
Thomas Gleixner
|
x86/irq: Reorganize the search in assign_irq_vector
commit 95ffeb4b5baca266e1d0d2bc90f1513e6f419cdd upstream.
Split out the code which advances the target cpu for the search so we can
reuse it for the next patch which adds an early validation check for the
vectormask which we get from the apic.
Add comments while at it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Borislav Petkov <bp@alien8.de>
Tested-by: Joe Lawrence <joe.lawr…
|
|
||||
|
Thomas Gleixner
|
x86/irq: Reorganize the return path in assign_irq_vector
commit 433cbd57d190a1cdd02f243df41c3d7f55ec4b94 upstream.
Use an explicit goto for the cases where we have success in the search/update
and return -ENOSPC if the search loop ends due to no space.
Preparatory patch for fixes. No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Borislav Petkov <bp@alien8.de>
Tested-by: Joe Lawrence <joe.lawrence@stratus.com>
Cc: J…
|
|
||||
|
Jiang Liu
|
x86/irq: Do not use apic_chip_data.old_domain as temporary buffer
commit 8a580f70f6936ec095da217018cdeeb5835c0207 upstream.
Function __assign_irq_vector() makes use of apic_chip_data.old_domain as a
temporary buffer, which is in the way of using apic_chip_data.old_domain for
synchronizing the vector cleanup with the vector assignement code.
Use a proper temporary cpumask for this.
[ tglx: Renamed the mask to searched_cpumask for clarity ]
Signed-off-by: Jian…
|
|
||||
|
Thomas Gleixner
|
x86/irq: Validate that irq descriptor is still active
commit 36f34c8c63da3e272fd66f91089228c22d2b6e8b upstream.
In fixup_irqs() we unconditionally dereference the irq chip of an irq
descriptor. The descriptor might still be valid, but already cleaned up,
i.e. the chip removed. Add a check for this condition.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Joe Lawrence <joe.lawrence@stratus.com>
Cc: …
|
|
||||
|
Jiang Liu
|
x86/irq: Fix a race in x86_vector_free_irqs()
commit 111abeba67e0dbdc26537429de9155e4f1d807d8 upstream.
There's a race condition between
x86_vector_free_irqs()
{
free_apic_chip_data(irq_data->chip_data);
xxxxx //irq_data->chip_data has been freed, but the pointer
//hasn't been reset yet
irq_domain_reset_irq_data(irq_data);
}
and
smp_irq_move_cleanup_interrupt()
{
raw_spin_lock(&vector_lock);
data = apic_chip_data(irq_desc_get_irq_d…
|
|
||||
|
Thomas Gleixner
|
x86/irq: Call chip->irq_set_affinity in proper context
commit e23b257c293ce4bcc8cabb2aa3097b6ed8a8261a upstream.
setup_ioapic_dest() calls irqchip->irq_set_affinity() completely
unprotected. That's wrong in several aspects:
- it opens a race window where irq_set_affinity() can be interrupted and the
irq chip left in unconsistent state.
- it triggers a lockdep splat when we fix the vector race for 4.3+ because
vector lock is taken with inter…
|
|
||||
|
Andy Lutomirski
|
x86/entry/compat: Add missing CLAC to entry_INT80_32
commit 3d44d51bd339766f0178f0cf2e8d048b4a4872aa upstream.
This doesn't seem to fix a regression -- I don't think the CLAC was
ever there.
I double-checked in a debugger: entries through the int80 gate do
not automatically clear AC.
Stable maintainers: I can provide a backport to 4.3 and earlier if
needed. This needs to be backported all the way to 3.10.
Reported-by: Brian Gerst <brgerst@gmail…
|
|
||||
|
|
x86/mpx: Fix off-by-one comparison with nr_registers
commit 9bf148cb0812595bfdf5100bd2c07e9bec9c6ef5 upstream.
In the unlikely event that regno == nr_registers then we get an array
overrun on regoff because the invalid register check is currently
off-by-one. Fix this with a check that regno is >= nr_registers instead.
Detected with static analysis using CoverityScan.
Fixes: fcc7ffd67991 "x86, mpx: Decode MPX instruction to get bound violation inf…
|
|
||||
|
Mikulas Patocka
|
hpfs: don't truncate the file when delete fails
commit b6853f78e763d42c7a158d8de3549c9827c604ab upstream.
The delete opration can allocate additional space on the HPFS filesystem
due to btree split. The HPFS driver checks in advance if there is
available space, so that it won't corrupt the btree if we run out of space
during splitting.
If there is not enough available space, the HPFS driver attempted to
truncate the file, but this results in …
|
|
||||
|
Al Viro
|
do_last(): ELOOP failure exit should be done after leaving RCU mode
commit 5129fa482b16615fd4464d2f5d23acb1b7056c66 upstream.
... or we risk seeing a bogus value of d_is_symlink() there.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
||||
|
Al Viro
|
should_follow_link(): validate ->d_seq after having decided to follow
commit a7f775428b8f5808815c0e3004020cedb94cbe3b upstream.
... otherwise d_is_symlink() above might have nothing to do with
the inode value we've got.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
||||
|
Konrad Rzeszutek Wilk
|
xen/pcifront: Fix mysterious crashes when NUMA locality information was extracted.
commit 4d8c8bd6f2062c9988817183a91fe2e623c8aa5e upstream.
Occasionaly PV guests would crash with:
pciback 0000:00:00.1: Xen PCI mapped GSI0 to IRQ16
BUG: unable to handle kernel paging request at 0000000d1a8c0be0
.. snip..
<ffffffff8139ce1b>] find_next_bit+0xb/0x10
[<ffffffff81387f22>] cpumask_next_and+0x22/0x40
[<ffffffff813c1ef8>] pci_device_probe+0xb8/0x120
[<ffffffff81529097>] ? driv…
|
|
||||
|
Konrad Rzeszutek Wilk
|
xen/pciback: Save the number of MSI-X entries to be copied later.
commit d159457b84395927b5a52adb72f748dd089ad5e5 upstream.
Commit 8135cf8b092723dbfcc611fe6fdcb3a36c9951c5 (xen/pciback: Save
xen_pci_op commands before processing it) broke enabling MSI-X because
it would never copy the resulting vectors into the response. The
number of vectors requested was being overwritten by the return value
(typically zero for success).
Save the number of vectors before pr…
|
|
||||
|
Konrad Rzeszutek Wilk
|
xen/pciback: Check PF instead of VF for PCI_COMMAND_MEMORY
commit 8d47065f7d1980dde52abb874b301054f3013602 upstream.
Commit 408fb0e5aa7fda0059db282ff58c3b2a4278baa0 (xen/pciback: Don't
allow MSI-X ops if PCI_COMMAND_MEMORY is not set) prevented enabling
MSI-X on passed-through virtual functions, because it checked the VF
for PCI_COMMAND_MEMORY but this is not a valid bit for VFs.
Instead, check the physical function for PCI_COMMAND_MEMORY.
Signed-off-b…
|
|
||||
|
Juergen Gross
|
xen/scsiback: correct frontend counting
commit f285aa8db7cc4432c1a03f8b55ff34fe96317c11 upstream.
When adding a new frontend to xen-scsiback don't decrement the number
of active frontends in case of no error. Doing so results in a failure
when trying to remove the xen-pvscsi nexus even if no domain is using
it.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: David…
|
|
||||
|
Ian Campbell
|
xen/arm: correctly handle DMA mapping of compound pages
commit 52ba0746b3b44c86aee121babf3b2fd9b8f84090 upstream.
Currently xen_dma_map_page concludes that DMA to anything other than
the head page of a compound page must be foreign, since the PFN of the
page is that of the head.
Fix the check to instead consider the whole of a compound page to be
local if the PFN of the head passes the 1:1 check.
We can never see a compound page which is a mixture o…
|
|
||||
|
Ludovic Desroches
|
ARM: at91/dt: fix typo in sama5d2 pinmux descriptions
commit 5e45a2589d24573c564630990c88ac93659f8fe4 upstream.
PIN_PA15 macro has the same value as PIN_PA14 so we were overriding PA14
mux/configuration.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Reported-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Fixes: 7f16cb676c00 ("ARM: at91/dt: add sama5d2 pinmux")
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>…
|
|
||||
|
Ivaylo Dimitrov
|
ARM: OMAP2+: Fix onenand initialization to avoid filesystem corruption
commit 3f315c5b850fa7aff73f50de8e316b98f611a32b upstream.
Commit e7b11dc7b77b ("ARM: OMAP2+: Fix onenand rate detection to avoid
filesystem corruption") partially fixed onenand configuration when GPMC
module is reset. Finish the job by also providing the correct values in
ONENAND_REG_SYS_CFG1 register.
Fixes: e7b11dc7b77b ("ARM: OMAP2+: Fix onenand rate detection to avoid
filesystem corruption")…
|
|
||||
|
Al Viro
|
do_last(): don't let a bogus return value from ->open() et.al. to confuse us
commit c80567c82ae4814a41287618e315a60ecf513be6 upstream.
... into returning a positive to path_openat(), which would interpret that
as "symlink had been encountered" and proceed to corrupt memory, etc.
It can only happen due to a bug in some ->open() instance or in some LSM
hook, etc., so we report any such event *and* make sure it doesn't trick
us into further unpleasantness.
Signed-off-by: Al…
|
|
||||
|
Simon Guinot
|
kernel/resource.c: fix muxed resource handling in __request_region()
commit 59ceeaaf355fa0fb16558ef7c24413c804932ada upstream.
In __request_region, if a conflict with a BUSY and MUXED resource is
detected, then the caller goes to sleep and waits for the resource to be
released. A pointer on the conflicting resource is kept. At wake-up
this pointer is used as a parent to retry to request the region.
A first problem is that this pointer might well be invalid (if …
|
|
||||
|
Stefan Hajnoczi
|
sunrpc/cache: fix off-by-one in qword_get()
commit b7052cd7bcf3c1478796e93e3dff2b44c9e82943 upstream.
The qword_get() function NUL-terminates its output buffer. If the input
string is in hex format \xXXXX... and the same length as the output
buffer, there is an off-by-one:
int qword_get(char **bpp, char *dest, int bufsize)
{
...
while (len < bufsize) {
...
*dest++ = (h << 4) | l;
len++;
…
|
|
||||
|
Steven Rostedt (Red Hat)
|
tracing: Fix showing function event in available_events
commit d045437a169f899dfb0f6f7ede24cc042543ced9 upstream.
The ftrace:function event is only displayed for parsing the function tracer
data. It is not used to enable function tracing, and does not include an
"enable" file in its event directory.
Originally, this event was kept separate from other events because it did
not have a ->reg parameter. But perf added a "reg" parameter for its use
which …
|
|
||||
|
Gavin Shan
|
powerpc/eeh: Fix partial hotplug criterion
commit f6bf0fa14cf848ae770e0b7842c9b11ce2f01645 upstream.
During error recovery, the device could be removed as part of the
partial hotplug. The criterion used to come with partial hotplug
is: if the device driver provides error_detected(), slot_reset()
and resume() callbacks, it's immune from hotplug. Otherwise,
it's going to experience partial hotplug during EEH recovery. But
the criterion isn'…
|
|
||||
|
|
KVM: x86: MMU: fix ubsan index-out-of-range warning
commit 17e4bce0ae63c7e03f3c7fa8d80890e7af3d4971 upstream.
Ubsan reports the following warning due to a typo in
update_accessed_dirty_bits template, the patch fixes
the typo:
[ 168.791851] ================================================================================
[ 168.791862] UBSAN: Undefined behaviour in arch/x86/kvm/paging_tmpl.h:252:15
[ 168.791866] index 4 is out of range for type '…
|
|
||||
|
Paolo Bonzini
|
KVM: x86: fix conversion of addresses to linear in 32-bit protected mode
commit 0c1d77f4ba5cc9c05a29adca3d6466cdf4969b70 upstream.
Commit e8dd2d2d641c ("Silence compiler warning in arch/x86/kvm/emulate.c",
2015-09-06) broke boot of the Hurd. The bug is that the "default:"
case actually could modify "la", but after the patch this change is
not reflected in *linear.
The bug is visible whenever a non-zero segment base causes the linear
address to wrap around the 4GB ma…
|
|
||||
|
Paolo Bonzini
|
KVM: x86: fix missed hardware breakpoints
commit 172b2386ed16a9143d9a456aae5ec87275c61489 upstream.
Sometimes when setting a breakpoint a process doesn't stop on it.
This is because the debug registers are not loaded correctly on
VCPU load.
The following simple reproducer from Oleg Nesterov tries using debug
registers in two threads. To see the bug, run a 2-VCPU guest with
"taskset -c 0" and run "./bp 0 1" inside the guest.
#inclu…
|
|
||||
|
Mark Rutland
|
KVM: arm/arm64: vgic: Ensure bitmaps are long enough
commit 236cf17c2502007a9d2dda3c39fb0d9a6bd03cc2 upstream.
When we allocate bitmaps in vgic_vcpu_init_maps, we divide the number of
bits we need by 8 to figure out how many bytes to allocate. However,
bitmap elements are always accessed as unsigned longs, and if we didn't
happen to allocate a size such that size % sizeof(unsigned long) == 0,
bitmap accesses may go past the end of the allocation.
…
|
|
||||
|
Christian Borntraeger
|
KVM: async_pf: do not warn on page allocation failures
commit d7444794a02ff655eda87e3cc54e86b940e7736f upstream.
In async_pf we try to allocate with NOWAIT to get an element quickly
or fail. This code also handle failures gracefully. Lets silence
potential page allocation failures under load.
qemu-system-s39: page allocation failure: order:0,mode:0x2200000
[...]
Call Trace:
([<00000000001146b8>] show_trace+0xf8/0x148)
[<000000000011476a>] show_stack…
|
|
||||
|
Robin Murphy
|
of/irq: Fix msi-map calculation for nonzero rid-base
commit 5d589d81acf974d23af98044aac56c6339d659f8 upstream.
The existing msi-map code is fine for shifting the entire RID space
upwards, but attempting finer-grained remapping reveals a bug. It turns
out that we are mistakenly treating the msi-base part as an offset, not
as a new base to remap onto, so things get squiffy when rid-base is
nonzero. Fix this, and at the same time add a sanity check ag…
|
|
||||
|
Benjamin Coddington
|
NFSv4: Fix a dentry leak on alias use
commit d9dfd8d741683347ee159d25f5b50c346a0df557 upstream.
In the case where d_add_unique() finds an appropriate alias to use it will
have already incremented the reference count. An additional dget() to swap
the open context's dentry is unnecessary and will leak a reference.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Fixes: 275bb307865a3 ("NFSv4: Move dentry instantiation into the…
|
|
||||
|
|
nfs: fix nfs_size_to_loff_t
commit 50ab8ec74a153eb30db26529088bc57dd700b24c upstream.
See http: //www.infradead.org/rpr.html
X-Evolution-Source: 1451162204.2173.11@leira.trondhjem.org
Content-Transfer-Encoding: 8bit
Mime-Version: 1.0
We support OFFSET_MAX just fine, so don't round down below it. Also
switch to using min_t to make the helper more readable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Fixes: 433c92379d9c …
|
|
||||
|
|
block: fix use-after-free in dio_bio_complete
commit 7ddc971f86aa0a4cee9f6886c356a052461957ae upstream.
kasan reported the following error when i ran xfstest:
[ 701.826854] ==================================================================
[ 701.826864] BUG: KASAN: use-after-free in dio_bio_complete+0x41a/0x600 at addr ffff880080b95f94
[ 701.826870] Read of size 4 by task loop2/3874
[ 701.826879] page:ffffea000202e540 count:0 mapcount:0…
|
|
||||
|
Hannes Reinecke
|
bio: return EINTR if copying to user space got interrupted
commit 2d99b55d378c996b9692a0c93dd25f4ed5d58934 upstream.
Commit 35dc248383bbab0a7203fca4d722875bc81ef091 introduced a check for
current->mm to see if we have a user space context and only copies data
if we do. Now if an IO gets interrupted by a signal data isn't copied
into user space any more (as we don't have a user space context) but
user space isn't notified about it.
This patch modifies th…
|
|
||||
|
Alexandra Yates
|
i2c: i801: Adding Intel Lewisburg support for iTCO
commit 1a1503c5396eb7f2edf4b8ef6067853014478c0c upstream.
Starting from Intel Sunrisepoint (Skylake PCH) the iTCO watchdog
resources have been moved to reside under the i801 SMBus host
controller whereas previously they were under the LPC device.
This patch adds Intel lewisburg SMBus support for iTCO device.
It allows to load watchdog dynamically when the hardware is
present.
Fixes: cdc5a3110e7…
|
|
||||
|
Shawn Lin
|
phy: core: fix wrong err handle for phy_power_on
commit b82fcabe212a11698fd4b3e604d2f81d929d22f6 upstream.
If phy_pm_runtime_get_sync failed but we already
enable regulator, current code return directly without
doing regulator_disable. This patch fix this problem
and cleanup err handle of phy_power_on to be more readable.
Fixes: 3be88125d85d ("phy: core: Support regulator ...")
Cc: Roger Quadros <rogerq@ti.com>
Cc: Axel Lin <axel.lin@ingics.co…
|
|
||||
|
Tejun Heo
|
writeback: keep superblock pinned during cgroup writeback association switches
commit 5ff8eaac1636bf6deae86491f4818c4c69d1a9ac upstream.
If cgroup writeback is in use, an inode is associated with a cgroup
for writeback. If the inode's main dirtier changes to another cgroup,
the association gets updated asynchronously. Nothing was pinning the
superblock while such switches are in progress and superblock could go
away while async switching is pending or in progress leading …
|
|
||||
|
Tejun Heo
|
cgroup: make sure a parent css isn't offlined before its children
commit aa226ff4a1ce79f229c6b7a4c0a14e17fececd01 upstream.
There are three subsystem callbacks in css shutdown path -
css_offline(), css_released() and css_free(). Except for
css_released(), cgroup core didn't guarantee the order of invocation.
css_offline() or css_free() could be called on a parent css before its
children. This behavior is unexpected and led to bugs in cpu and
memory controller…
|
|
||||
|
Tejun Heo
|
cpuset: make mm migration asynchronous
commit e93ad19d05648397ef3bcb838d26aec06c245dc0 upstream.
If "cpuset.memory_migrate" is set, when a process is moved from one
cpuset to another with a different memory node mask, pages in used by
the process are migrated to the new set of nodes. This was performed
synchronously in the ->attach() callback, which is synchronized
against process management. Recently, the synchronization was change…
|
|
||||
|
Sebastian Andrzej Siewior
|
PCI/AER: Flush workqueue on device remove to avoid use-after-free
commit 4ae2182b1e3407de369f8c5d799543b7db74221b upstream.
A Root Port's AER structure (rpc) contains a queue of events. aer_irq()
enqueues AER status information and schedules aer_isr() to dequeue and
process it. When we remove a device, aer_remove() waits for the queue to
be empty, then frees the rpc struct.
But aer_isr() references the rpc struct after dequeueing and possibly
emptying the qu…
|
|
||||
|
Vineet Gupta
|
ARCv2: SMP: Emulate IPI to self using software triggered interrupt
commit bb143f814ea488769ca2e79e0b376139cb5f134b upstream.
ARConnect/MCIP Inter-Core-Interrupt module can't send interrupt to
local core. So use core intc capability to trigger software
interrupt to self, using an unsued IRQ #21.
This showed up as csd deadlock with LTP trace_sched on a dual core
system. This test acts as scheduler fuzzer, triggering all sorts of
schedulting activity. Trouble star…
|
|
||||
|
Vineet Gupta
|
ARCv2: STAR 9000950267: Handle return from intr to Delay Slot #2
commit cbfe74a753e877b49dc54e9b04d5d42230ca0aed upstream.
Returning to delay slot, riding an interrupti, had one loose end.
AUX_USER_SP used for restoring user mode SP upon RTIE was not being
setup from orig task's saved value, causing task to use wrong SP,
leading to ProtV errors.
The reason being:
- INTERRUPT_EPILOGUE returns to a kernel trampoline, thus not expected to restore it
- EXCEPTIO…
|
|
||||
|
Tejun Heo
|
libata: fix sff host state machine locking while polling
commit 8eee1d3ed5b6fc8e14389567c9a6f53f82bb7224 upstream.
The bulk of ATA host state machine is implemented by
ata_sff_hsm_move(). The function is called from either the interrupt
handler or, if polling, a work item. Unlike from the interrupt path,
the polling path calls the function without holding the host lock and
ata_sff_hsm_move() selectively grabs the lock.
This is completely broken. If…
|
|
||||
|
Quinn Tran
|
qla2xxx: Fix stale pointer access.
commit cb43285ff7039fe3c4b0bc476e6d6569c31104f3 upstream.
[ Upstream Commit 84e32a06f4f8756ce9ec3c8dc7e97896575f0771 ]
Commit 84e32a0 ("qla2xxx: Use pci_enable_msix_range() instead of
pci_enable_msix()") introduced a regression when target mode is enabled.
In qla24xx_enable_msix(), ha->max_rsp_queues was incorrectly set
to a value higher than the number of response queues allocated causing
an in…
|
|
||||
|
Cyrille Pitchen
|
spi: atmel: fix gpio chip-select in case of non-DT platform
commit 70f340df24518d36eeaefb6652d492f250115c19 upstream.
The non-DT platform that uses this driver (actually the AVR32) was taking a bad
branch for determining if the IP would use gpio for CS.
Adding the presence of DT as a condition fixes this issue.
Fixes: 4820303480a1 ("spi: atmel: add support for the internal chip-select of the spi controller")
Reported-by: Mans Rullgard <mans@mansr.com>
Si…
|
|
||||
|
Nicholas Bellinger
|
target: Fix race with SCF_SEND_DELAYED_TAS handling
commit 310d3d314be7f0a84011ebdc4bdccbcae9755a87 upstream.
This patch fixes a race between setting of SCF_SEND_DELAYED_TAS
in transport_send_task_abort(), and check of the same bit in
transport_check_aborted_status().
It adds a __transport_check_aborted_status() version that is
used by target_execute_cmd() when se_cmd->t_state_lock is
held, and a transport_check_aborted_status() wrapper for
all o…
|
|
||||
|
Nicholas Bellinger
|
target: Fix remote-port TMR ABORT + se_cmd fabric stop
commit 0f4a943168f31d29a1701908931acaba518b131a upstream.
To address the bug where fabric driver level shutdown
of se_cmd occurs at the same time when TMR CMD_T_ABORTED
is happening resulting in a -1 ->cmd_kref, this patch
adds a CMD_T_FABRIC_STOP bit that is used to determine
when TMR + driver I_T nexus shutdown is happening
concurrently.
It changes target_sess_cmd_list_set_waiting() to obtain
…
|
|
||||
|
Nicholas Bellinger
|
target: Fix TAS handling for multi-session se_node_acls
commit ebde1ca5a908b10312db4ecd7553e3ba039319ab upstream.
This patch fixes a bug in TMR task aborted status (TAS)
handling when multiple sessions are connected to the
same target WWPN endpoint and se_node_acl descriptor,
resulting in TASK_ABORTED status to not be generated
for aborted se_cmds on the remote port.
This is due to core_tmr_handle_tas_abort() incorrectly
comparing se_node_acl instead…
|
|
||||
|
Nicholas Bellinger
|
target: Fix LUN_RESET active TMR descriptor handling
commit a6d9bb1c9605cd4f44e2d8290dc4d0e88f20292d upstream.
This patch fixes a NULL pointer se_cmd->cmd_kref < 0
refcount bug during TMR LUN_RESET with active TMRs,
triggered during se_cmd + se_tmr_req descriptor
shutdown + release via core_tmr_drain_tmr_list().
To address this bug, go ahead and obtain a local
kref_get_unless_zero(&se_cmd->cmd_kref) for active I/O
to set CMD_T_ABORTED, and transpo…
|
|
||||
|
Nicholas Bellinger
|
target: Fix LUN_RESET active I/O handling for ACK_KREF
commit febe562c20dfa8f33bee7d419c6b517986a5aa33 upstream.
This patch fixes a NULL pointer se_cmd->cmd_kref < 0
refcount bug during TMR LUN_RESET with active se_cmd
I/O, that can be triggered during se_cmd descriptor
shutdown + release via core_tmr_drain_state_list() code.
To address this bug, add common __target_check_io_state()
helper for ABORT_TASK + LUN_RESET w/ CMD_T_COMPLETE
checking, and s…
|
|
||||
|
|
ALSA: hda - Fixing background noise on Dell Inspiron 3162
commit 3b43b71f05d3ecd01c4116254666d9492301697d upstream.
After login to the desktop on Dell Inspiron 3162,
there's a very loud background noise comes from the builtin speaker.
The noise does not go away even if the speaker is muted.
The noise disappears after using the aamix fixup.
Codec: Realtek ALC3234
Address: 0
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x10ec0255
Subsystem Id: 0x10…
|
|
||||
|
Takashi Iwai
|
ALSA: hda - Apply clock gate workaround to Skylake, too
commit 7e31a0159461818a1bda49662921b98a29c1187b upstream.
Some Skylake machines show the codec probe errors in certain
situations, e.g. HP Z240 desktop fails to probe the onboard Realtek
codec at reloading the snd-hda-intel module like:
snd_hda_intel 0000:00:1f.3: spurious response 0x200:0x2, last cmd=0x000000
snd_hda_intel 0000:00:1f.3: azx_get_response timeout, switching to polling mode: la…
|
|
||||
|
Tejun Heo
|
Revert "workqueue: make sure delayed work run in local cpu"
commit 041bd12e272c53a35c54c13875839bcb98c999ce upstream.
This reverts commit 874bbfe600a660cba9c776b3957b1ce393151b76.
Workqueue used to implicity guarantee that work items queued without
explicit CPU specified are put on the local CPU. Recent changes in
timer broke the guarantee and led to vmstat breakage which was fixed
by 176bed1de5bf ("vmstat: explicitly schedule per-cpu work on the CPU
we…
|
|
||||
|
Tejun Heo
|
workqueue: handle NUMA_NO_NODE for unbound pool_workqueue lookup
commit d6e022f1d207a161cd88e08ef0371554680ffc46 upstream.
When looking up the pool_workqueue to use for an unbound workqueue,
workqueue assumes that the target CPU is always bound to a valid NUMA
node. However, currently, when a CPU goes offline, the mapping is
destroyed and cpu_to_node() returns NUMA_NO_NODE.
This has always been broken but hasn't triggered often enough before
874bbfe600a6 ("w…
|
|
||||
|
Sachin Kulkarni
|
mac80211: Requeue work after scan complete for all VIF types.
commit 4fa11ec726a32ea6dd768dbb2e2af3453a98ec0a upstream.
During a sw scan ieee80211_iface_work ignores work items for all vifs.
However after the scan complete work is requeued only for STA, ADHOC
and MESH iftypes.
This occasionally results in event processing getting delayed/not
processed for iftype AP when it coexists with a STA. This can result
in data halt and eventually disconnection on th…
|
|
||||
|
Johannes Berg
|
rfkill: fix rfkill_fop_read wait_event usage
commit 6736fde9672ff6717ac576e9bba2fd5f3dfec822 upstream.
The code within wait_event_interruptible() is called with
!TASK_RUNNING, so mustn't call any functions that can sleep,
like mutex_lock().
Since we re-check the list_empty() in a loop after the wait,
it's safe to simply use list_empty() without locking.
This bug has existed forever, but was only discovered now
because all userspace implem…
|
|
||||
|
Wanpeng Li
|
tick/nohz: Set the correct expiry when switching to nohz/lowres mode
commit 1ca8ec532fc2d986f1f4a319857bb18e0c9739b4 upstream.
commit 0ff53d096422 sets the next tick interrupt to the last jiffies update,
i.e. in the past, because the forward operation is invoked before the set
operation. There is no resulting damage (yet), but we get an extra pointless
tick interrupt.
Revert the order so we get the next tick interrupt in the future.
Fixes: commit 0ff53d096422 "t…
|
|
||||
|
Jiri Olsa
|
perf stat: Do not clean event's private stats
commit 3f416f22d1e21709a631189ba169f76fd267b374 upstream.
Mel reported stddev reporting was broken due to following commit:
106a94a0f8c2 ("perf stat: Introduce read_counters function")
This commit merged interval and overall counters reading into single
read_counters function.
The old interval code cleaned the stddev data for some reason (it's
never displayed in interval mode) and the mention…
|
|
||||
|
Oliver Neukum
|
cdc-acm:exclude Samsung phone 04e8:685d
commit e912e685f372ab62a2405a1acd923597f524e94a upstream.
This phone needs to be handled by a specialised firmware tool
and is reported to crash irrevocably if cdc-acm takes it.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
||||
|
Sudip Mukherjee
|
Revert "Staging: panel: usleep_range is preferred over udelay"
commit b64a1cbef6df47c986ad622b5b2e4d3d1940070c upstream.
This reverts commit ebd43516d3879f882a403836bba8bc5791f26a28.
We should not be sleeping inside spin_lock.
Fixes: ebd43516d387 ("Staging: panel: usleep_range is preferred over udelay")
Cc: Sirnam Swetha <theonly.ultimate@gmail.com>
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Reported-by: Huang, Ying <ying.huang@intel.com>
Teste…
|
|
||||
|
Samuel Thibault
|
Staging: speakup: Fix getting port information
commit 327b882d3bcc1fba82dbd39b5cf5a838c81218e2 upstream.
Commit f79b0d9c223c ("staging: speakup: Fixed warning <linux/serial.h>
instead of <asm/serial.h>") broke the port information in the speakup
driver: SERIAL_PORT_DFNS only gets defined if asm/serial.h is included,
and no other header includes asm/serial.h.
We here make sure serialio.c does get the arch-specific definition of
SERIAL_PORT_DF…
|
|
||||
|
Martin K. Petersen
|
sd: Optimal I/O size is in bytes, not sectors
commit d0eb20a863ba7dc1d3f4b841639671f134560be2 upstream.
Commit ca369d51b3e1 ("block/sd: Fix device-imposed transfer length
limits") accidentally switched optimal I/O size reporting from bytes to
block layer sectors.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>…
|
|
||||
|
Ilya Dryomov
|
libceph: don't spam dmesg with stray reply warnings
commit cd8140c673d9ba9be3591220e1b2226d9e1e40d3 upstream.
Commit d15f9d694b77 ("libceph: check data_len in ->alloc_msg()")
mistakenly bumped the log level on the "tid %llu unknown, skipping"
message. Turn it back into a dout() - stray replies are perfectly
normal when OSDs flap, crash, get killed for testing purposes, etc.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Elder…
|
|
||||
|
Ilya Dryomov
|
libceph: use the right footer size when skipping a message
commit dbc0d3caff5b7591e0cf8e34ca686ca6f4479ee1 upstream.
ceph_msg_footer is 21 bytes long, while ceph_msg_footer_old is only 13.
Don't skip too much when CEPH_FEATURE_MSG_AUTH isn't negotiated.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
||||
|
Ilya Dryomov
|
libceph: don't bail early from try_read() when skipping a message
commit e7a88e82fe380459b864e05b372638aeacb0f52d upstream.
The contract between try_read() and try_write() is that when called
each processes as much data as possible. When instructed by osd_client
to skip a message, try_read() is violating this contract by returning
after receiving and discarding a single message instead of checking for
more. try_write() then gets a chance to write out more req…
|
|
||||
|
Ilya Dryomov
|
libceph: fix ceph_msg_revoke()
commit 67645d7619738e51c668ca69f097cb90b5470422 upstream.
There are a number of problems with revoking a "was sending" message:
(1) We never make any attempt to revoke data - only kvecs contibute to
con->out_skip. However, once the header (envelope) is written to the
socket, our peer learns data_len and sets itself to expect at least
data_len bytes to follow front or front+middle. If ceph_msg_…
|
|
||||
|
|
seccomp: always propagate NO_NEW_PRIVS on tsync
commit 103502a35cfce0710909da874f092cb44823ca03 upstream.
Before this patch, a process with some permissive seccomp filter
that was applied by root without NO_NEW_PRIVS was able to add
more filters to itself without setting NO_NEW_PRIVS by setting
the new filter from a throwaway thread with NO_NEW_PRIVS.
Signed-off-by: Jann Horn <jann@thejh.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
S…
|
|
||||
|
Viresh Kumar
|
cpufreq: Fix NULL reference crash while accessing policy->governor_data
commit e4b133cc4b30b48d488e4e4fffb132f173ce4358 upstream.
There is a race discovered by Juri, where we are able to:
- create and read a sysfs file before policy->governor_data is being set
to a non NULL value.
OR
- set policy->governor_data to NULL, and reading a file before being
destroyed.
And so such a crash is reported:
Unable to handle kernel NULL pointer dereference at virtual addre…
|
|
||||
|
Arnd Bergmann
|
cpufreq: pxa2xx: fix pxa_cpufreq_change_voltage prototype
commit fb2a24a1c6457d21df9fae0dd66b20c63ba56077 upstream.
There are two definitions of pxa_cpufreq_change_voltage, with slightly
different prototypes after one of them had its argument marked 'const'.
Now the other one (for !CONFIG_REGULATOR) produces a harmless warning:
drivers/cpufreq/pxa2xx-cpufreq.c: In function 'pxa_set_target':
drivers/cpufreq/pxa2xx-cpufreq.c:291:36: warning: passing argu…
|
|
||||
|
Peter Rosin
|
hwmon: (ads1015) Handle negative conversion values correctly
commit acc146943957d7418a6846f06e029b2c5e87e0d5 upstream.
Make the divisor signed as DIV_ROUND_CLOSEST is undefined for negative
dividends when the divisor is unsigned.
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
||||
|
Nishanth Menon
|
hwmon: (gpio-fan) Remove un-necessary speed_index lookup for thermal hook
commit 000e0949148382c4962489593a2f05504c2a6771 upstream.
Thermal hook gpio_fan_get_cur_state is only interested in knowing
the current speed index that was setup in the system, this is
already available as part of fan_data->speed_index which is always
set by set_fan_speed. Using get_fan_speed_index is useful when we
have no idea about the fan speed configuration (for example during
fan_ctrl_init…
|
|
||||
|
Thorsten Leemhuis
|
hwmon: (dell-smm) Blacklist Dell Studio XPS 8000
commit 6220f4ebd7b4db499238c2dc91268a9c473fd01c upstream.
Since Linux 4.0 the CPU fan speed is going up and down on Dell Studio
XPS 8000 and 8100 for unknown reasons. The 8100 was already
blacklisted in commit a4b45b25f18d ("hwmon: (dell-smm) Blacklist
Dell Studio XPS 8100"). This patch blacklists the XPS 8000.
Without further debugging on the affected machine, it is not possible
to find the pro…
|
|
||||
|
Chen Yu
|
Thermal: do thermal zone update after a cooling device registered
commit 4511f7166a2deb5f7a578cf87fd2fe1ae83527e3 upstream.
When a new cooling device is registered, we need to update the
thermal zone to set the new registered cooling device to a proper
state.
This fixes a problem that the system is cool, while the fan devices
are left running on full speed after boot, if fan device is registered
after thermal zone device.
Here is the history of why current pa…
|
|
||||
|
Zhang Rui
|
Thermal: handle thermal zone device properly during system sleep
commit ff140fea847e1c2002a220571ab106c2456ed252 upstream.
Current thermal code does not handle system sleep well because
1. the cooling device cooling state may be changed during suspend
2. the previous temperature reading becomes invalid after resumed because
it is got before system sleep
3. updating thermal zone device during suspending/resuming
is wrong because some devices may have alre…
|
|
||||
|
Zhang Rui
|
Thermal: initialize thermal zone device correctly
commit bb431ba26c5cd0a17c941ca6c3a195a3a6d5d461 upstream.
After thermal zone device registered, as we have not read any
temperature before, thus tz->temperature should not be 0,
which actually means 0C, and thermal trend is not available.
In this case, we need specially handling for the first
thermal_zone_device_update().
Both thermal core framework and step_wise governor is
enhanced to handle t…
|
|
||||
|
Leon Romanovsky
|
IB/mlx5: Expose correct maximum number of CQE capacity
commit 9f17768611ebf81dfac69948dd12622b6f2e45fc upstream.
Maximum number of EQE capacity per CQ was mistakenly exposed
as CQE. Fix that.
Fixes: 938fe83c8dcb ("net/mlx5_core: New device capabilities handling")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gre…
|
|
||||
|
Vinit Agnihotri
|
IB/qib: Support creating qps with GFP_NOIO flag
commit fbbeb8632bf0b46ab44cfcedc4654cd7831b7161 upstream.
The current code is problematic when the QP creation and ipoib is used to
support NFS and NFS desires to do IO for paging purposes. In that case, the
GFP_KERNEL allocation in qib_qp.c causes a deadlock in tight memory
situations.
This fix adds support to create queue pair with GFP_NOIO flag for connected
mode only to cleanly fail the crea…
|
|
||||
|
Mike Marciniszyn
|
IB/qib: fix mcast detach when qp not attached
commit 09dc9cd6528f5b52bcbd3292a6312e762c85260f upstream.
The code produces the following trace:
[1750924.419007] general protection fault: 0000 [#3] SMP
[1750924.420364] Modules linked in: nfnetlink autofs4 rpcsec_gss_krb5 nfsv4
dcdbas rfcomm bnep bluetooth nfsd auth_rpcgss nfs_acl dm_multipath nfs lockd
scsi_dh sunrpc fscache radeon ttm drm_kms_helper drm serio_raw parport_pc
ppdev i2c_algo_bi…
|
|
||||
|
Bart Van Assche
|
IB/cm: Fix a recently introduced deadlock
commit 4bfdf635c668869c69fd18ece37ec66fb6f38fcf upstream.
ib_send_cm_drep() calls cm_enter_timewait() while holding a spinlock
that can be locked from inside an interrupt handler. Hence do not
enable interrupts inside cm_enter_timewait() if called with interrupts
disabled.
This patch fixes e.g. the following deadlock:
Acked-by: Erez Shitrit <erezsh@mellanox.com>
================================…
|
|
||||
|
|
dmaengine: dw: disable BLOCK IRQs for non-cyclic xfer
commit ee1cdcdae59563535485a5f56ee72c894ab7d7ad upstream.
The commit 2895b2cad6e7 ("dmaengine: dw: fix cyclic transfer callbacks")
re-enabled BLOCK interrupts with regard to make cyclic transfers work. However,
this change becomes a regression for non-cyclic transfers as interrupt counters
under stress test had been grown enormously (approximately per 4-5 bytes in the
UART loop back test).
Takin…
|
|
||||
|
Songjun Wu
|
dmaengine: at_xdmac: fix resume for cyclic transfers
commit 611dcadb01c89d1d3521450c05a4ded332e5a32d upstream.
When having cyclic transfers, the channel was paused when performing
suspend but was not correctly resumed.
Signed-off-by: Songjun Wu <songjun.wu@atmel.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Vinod K…
|
|
||||
|
|
dmaengine: dw: fix cyclic transfer callbacks
commit 2895b2cad6e7a95104cf396e5330054453382ae1 upstream.
Cyclic transfer callbacks rely on block completion interrupts which were
disabled in commit ff7b05f29fd4 ("dmaengine/dw_dmac: Don't handle block
interrupts"). This re-enables block interrupts so the cyclic callbacks
can work. Other transfer types are not affected as they set the INT_EN
bit only on the last block.
Fixes: ff7b05f29fd4 ("d…
|
|
||||
|
|
dmaengine: dw: fix cyclic transfer setup
commit df3bb8a0e619d501cd13334c3e0586edcdcbc716 upstream.
Commit 61e183f83069 ("dmaengine/dw_dmac: Reconfigure interrupt and
chan_cfg register on resume") moved some channel initialisation to
a new function which must be called before starting a transfer.
This updates dw_dma_cyclic_start() to use dwc_dostart() like the other
modes, thus ensuring dwc_initialize() gets called and removing some cod…
|
|
||||
|
Dan Williams
|
nfit: fix multi-interface dimm handling, acpi6.1 compatibility
commit 6697b2cf69d4363266ca47eaebc49ef13dabc1c9 upstream.
ACPI 6.1 clarified that multi-interface dimms require multiple control
region entries (DCRs) per dimm. Previously we were assuming that a
control region is only present when block-data-windows are present.
This implementation was done with an eye to be compatibility with the
looser ACPI 6.0 interpretation of this table.
1/ When coalescin…
|
|
||||
|
|
ACPI / PCI / hotplug: unlock in error path in acpiphp_enable_slot()
commit 2c3033a0664dfae91e1dee7fabac10f24354b958 upstream.
In acpiphp_enable_slot(), there is a missing unlock path
when error occurred. It needs to be unlocked before returning
an error.
Signed-off-by: Insu Yun <wuninsu@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
||||
|
Hans de Goede
|
ACPI: Revert "ACPI / video: Add Dell Inspiron 5737 to the blacklist"
commit b186b4dcb79b1914c3dadb27ac72dafaa4267998 upstream.
The quirk to get "acpi_backlight=vendor" behavior by default on the
Dell Inspiron 5737 was added before we started doing
"acpi_backlight=native" by default on Win8 ready machines.
Since we now avoid using acpi-video as backlight driver on these machines
by default (using the native driver instead) we no longer need this quirk.
Moreover t…
|
|
||||
|
Hans de Goede
|
ACPI / video: Add disable_backlight_sysfs_if quirk for the Toshiba Satellite R830
commit b21f2e81bd3fd8ed260590e72901254bca2193cd upstream.
The Toshiba Satellite R830 needs disable_backlight_sysfs_if=1, just like
the Toshiba Portege R830. Add a quirk for this.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=21012
Tested-by: To Do <entodoays@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-…
|
|
||||
|
Hans de Goede
|
ACPI / video: Add disable_backlight_sysfs_if quirk for the Toshiba Portege R700
commit de588b8ff057d4de0751f337b930f90ca522bab2 upstream.
The Toshiba Portege R700 needs disable_backlight_sysfs_if=1, just like
the Toshiba Portege R830. Add a quirk for this.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=21012
Tested-by: Emma Reisz <emmareisz@outlook.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed…
|
|
||||
|
Arnd Bergmann
|
lib: sw842: select crc32
commit 5b57167749274961baf15ed1f05a4996b3ab0487 upstream.
The sw842 library code was merged in linux-4.1 and causes a very rare randconfig
failure when CONFIG_CRC32 is not set:
lib/built-in.o: In function `sw842_compress':
oid_registry.c:(.text+0x12ddc): undefined reference to `crc32_be'
lib/built-in.o: In function `sw842_decompress':
oid_registry.c:(.text+0x137e4): undefined ref…
|
|
||||
|
|
uapi: update install list after nvme.h rename
commit a9cf8284b45110a4d98aea180a89c857e53bf850 upstream.
Commit 9d99a8dda154 ("nvme: move hardware structures out of the uapi
version of nvme.h") renamed nvme.h to nvme_ioctl.h, but the uapi list
still refers to nvme.h. People trying to install the headers hit a
failure as the header no longer exists.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>…
|
|
||||
|
Josh Boyer
|
ideapad-laptop: Add Lenovo Yoga 700 to no_hw_rfkill dmi list
commit 6b31de3e698582fe0b8f7f4bab15831b73204800 upstream.
Like the Yoga 900 models the Lenovo Yoga 700 does not have a
hw rfkill switch, and trying to read the hw rfkill switch through the
ideapad module causes it to always reported blocking breaking wifi.
This commit adds the Lenovo Yoga 700 to the no_hw_rfkill dmi list, fixing
the wifi breakage.
BugLink: https://bugzilla.redhat.com/show_bug.c…
|
|
||||
|
Josh Boyer
|
ideapad-laptop: Add Lenovo ideapad Y700-17ISK to no_hw_rfkill dmi list
commit edde316acb5f07c04abf09a92f59db5d2efd14e2 upstream.
One of the newest ideapad models also lacks a physical hw rfkill switch,
and trying to read the hw rfkill switch through the ideapad module
causes it to always reported blocking breaking wifi.
Fix it by adding this model to the DMI list.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1286293
Signed-off-by: Josh Boyer <jwboyer@fedor…
|
|
||||
|
Azael Avalos
|
toshiba_acpi: Fix blank screen at boot if transflective backlight is supported
commit bae5336f0aaedffa115dab9cb3d8a4e4aed3a26a upstream.
If transflective backlight is supported and the brightness is zero
(lowest brightness level), the set_lcd_brightness function will activate
the transflective backlight, making the LCD appear to be turned off.
This patch fixes the issue by incrementing the brightness level, and
by doing so, avoiding the activation of the tranflective backl…
|
|
||||
|
Al Viro
|
make sure that freeing shmem fast symlinks is RCU-delayed
commit 3ed47db34f480df7caf44436e3e63e555351ae9a upstream.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
||||
|
Alex Deucher
|
drm/radeon/pm: adjust display configuration after powerstate
commit 39d4275058baf53e89203407bf3841ff2c74fa32 upstream.
set_power_state defaults to no displays, so we need to update
the display configuration after setting up the powerstate on the
first call. In most cases this is not an issue since ends up
getting called multiple times at any given modeset and the proper
order is achieved in the display changed handling at the top of
the function.
Reviewed…
|
|
||||
|
Mario Kleiner
|
drm/radeon: Don't hang in radeon_flip_work_func on disabled crtc. (v2)
commit 2b8341b3f917c108b47f6a8a771a40d226c57883 upstream.
This fixes a regression introduced in Linux 4.4.
Limit the amount of time radeon_flip_work_func can
delay programming a page flip, by both limiting the
maximum amount of time per wait cycle and the maximum
number of wait cycles. Continue the flip if the limit
is exceeded, even if that may result in a visual or
timing glitch.
This is to p…
|
|
||||
|
Mario Kleiner
|
drm: Fix treatment of drm_vblank_offdelay in drm_vblank_on() (v2)
commit bb74fc1bf3072bd3ab4ed5f43afd287a63baf2d7 upstream.
drm_vblank_offdelay can have three different types of values:
< 0 is to be always treated the same as dev->vblank_disable_immediate
= 0 is to be treated as "never disable vblanks"
> 0 is to be treated as disable immediate if kms driver wants it
that way via dev->vblank_disable_immediate. Otherwise it is
a disable timeout in msecs.…
|
|
||||
|
Mario Kleiner
|
drm: Fix drm_vblank_pre/post_modeset regression from Linux 4.4
commit c61934ed9a0e3911a9935df26858726a7ec35ec0 upstream.
Changes to drm_update_vblank_count() in Linux 4.4 broke the
behaviour of the pre/post modeset functions as the new update
code doesn't deal with hw vblank counter resets inbetween calls
to drm_vblank_pre_modeset an drm_vblank_post_modeset, as it
should.
This causes mistreatment of such hw counter resets as counter
wraparound, and thereby …
|
|
||||
|
Mario Kleiner
|
drm: Prevent vblank counter bumps > 1 with active vblank clients. (v2)
commit 99b8e71597fadd6b2ac85e6e10f221f79dd9c1c1 upstream.
This fixes a regression introduced by the new drm_update_vblank_count()
implementation in Linux 4.4:
Restrict the bump of the software vblank counter in drm_update_vblank_count()
to a safe maximum value of +1 whenever there is the possibility that
concurrent readers of vblank timestamps could be active at the moment,
as the current implem…
|
|
||||
|
Mario Kleiner
|
drm: No-Op redundant calls to drm_vblank_off() (v2)
commit e8235891b33799d597ff4ab5e45afe173a65da30 upstream.
Otherwise if a kms driver calls into drm_vblank_off() more than once
before calling drm_vblank_on() again, the redundant calls to
vblank_disable_and_save() will call drm_update_vblank_count()
while hw vblank counters and vblank timestamping are in a undefined
state during modesets, dpms off etc.
At least with the legacy drm helpers it is …
|
|
||||
|
Rasmus Villemoes
|
drm/radeon: use post-decrement in error handling
commit bc3f5d8c4ca01555820617eb3b6c0857e4df710d upstream.
We need to use post-decrement to get the pci_map_page undone also for
i==0, and to avoid some very unpleasant behaviour if pci_map_page
failed already at i==0.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-of…
|
|
||||
|
Gerd Hoffmann
|
drm/qxl: use kmalloc_array to alloc reloc_info in qxl_process_single_command
commit 34855706c30d52b0a744da44348b5d1cc39fbe51 upstream.
This avoids integer overflows on 32bit machines when calculating
reloc_info size, as reported by Alan Cox.
Cc: gnomes@lxorguk.ukuu.org.uk
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfounda…
|
|
||||
|
Rasmus Villemoes
|
drm/i915: fix error path in intel_setup_gmbus()
commit ed3f9fd1e865975ceefdb2a43b453e090b1fd787 upstream.
This fails to undo the setup for pin==0; moreover, something
interesting happens if the setup failed already at pin==0.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Fixes: f899fc64cda8 ("drm/i915: use GMBUS to manage i2c links")
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/m…
|
|
||||
|
Jani Nikula
|
drm/i915/dsi: don't pass arbitrary data to sideband
commit 26f6f2d301c1fb46acb1138ee155125815239b0d upstream.
Since sequence block v2 the second byte contains flags other than just
pull up/down. Don't pass arbitrary data to the sideband interface.
The rest may or may not work for sequence block v2, but there should be
no harm done.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link:…
|
|
||||
|
Jani Nikula
|
drm/i915/dsi: defend gpio table against out of bounds access
commit 4db3a2448ec8902310acb78de39b6227a9a56ac8 upstream.
Do not blindly trust the VBT data used for indexing.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/cc32d40c2b47f2d2151811855ac2c3dabab1d57d.1454582914.git.jani.nikula@intel.com
(cherry picked from commit 5d2d0a12d3d08bf50434f…
|
|
||||
|
Lyude
|
drm/i915/skl: Don't skip mst encoders in skl_ddi_pll_select()
commit 3d849b02336be103d312c1574d6f7314d5c0bc9f upstream.
We don't actually check for INTEL_OUTPUT_DP_MST at all in here, as a
result we skip assigning a DPLL to any DP MST ports, which makes link
training fail:
[ 1442.933896] [drm:intel_power_well_enable] enabling DDI D power well
[ 1442.933905] [drm:skl_set_power_well] Enabling DDI D power well
[ 1442.933957] [drm:intel_mst_pre_enable_dp] 0
[ …
|
|
||||
|
Ville Syrjälä
|
drm/i915: Don't reject primary plane windowing with color keying enabled on SKL+
commit 6f94b6dd006909a5ef6435cc0af557e945240f48 upstream.
On SKL+ plane scaling is mutually exclusive with color keying. The code
check for this, but during some refactoring the code got changed to
also reject primary plane windowing when color keying is used. There is
no such restriction in the hardware, so restore the original logic.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fi…
|
|
||||
|
Jani Nikula
|
drm/i915/dp: fall back to 18 bpp when sink capability is unknown
commit 5efd407674068dede403551bea3b0b134c32513a upstream.
Per DP spec, the source device should fall back to 18 bpp, VESA range
RGB when the sink capability is unknown. Fix the color depth
clamping. 18 bpp color depth should ensure full color range in automatic
mode.
The clamping has been HDMI specific since its introduction in
commit 996a2239f93b03c5972923f04b097f65565c5bed
Author: Daniel Vett…
|
|
||||
|
Francisco Jerez
|
drm/i915: Make sure DC writes are coherent on flush.
commit 935a0ff0e1ea62a116848c0a187b13838f7b9cee upstream.
We need to set the DC FLUSH PIPE_CONTROL bit on Gen7+ to guarantee
that writes performed via the HDC are visible in memory. Fixes an
intermittent failure in a Piglit test that writes to a BO from a
shader using GL atomic counters (implemented as HDC untyped atomics)
and then expects the memory to read back the same value after mapping
it …
|
|
||||
|
Daniel Vetter
|
drm/i915: Init power domains early in driver load
commit f5949141a21ee16edf1beaf95cbae7e419171ab5 upstream.
Since
commit ac9b8236551d1177fd07b56aef9b565d1864420d
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Fri Nov 27 18:55:26 2015 +0200
drm/i915: Introduce a gmbus power domain
gmbus also needs the power domain infrastructure right from the start,
since as soon as we register the i2c controllers someone can use them.
v2:…
|
|
||||
|
Lyude
|
drm/i915: intel_hpd_init(): Fix suspend/resume reprobing
commit 2dc2f761dea65069485110d24eaa5b0d5d808b07 upstream.
This fixes reprobing of display connectors on resume. After some
talking with danvet on IRC, I learned that calling
drm_helper_hpd_irq_event() does actually trigger a full reprobe of each
connector's status. It turns out this is the actual reason reprobing on
resume hasn't been working (this was observed on a T440s):
- We call hpd_init(…
|
|
||||
|
Chris Wilson
|
drm/i915: Restore inhibiting the load of the default context
commit 06ef83a705a98da63797a5a570220b6ca36febd4 upstream.
Following a GPU reset, we may leave the context in a poorly defined
state, and reloading from that context will leave the GPU flummoxed. For
secondary contexts, this will lead to that context being banned - but
currently it is also causing the default context to become banned,
leading to turmoil in the shared state.
This is a regression f…
|
|
||||
|
|
drm: fix missing reference counting decrease
commit dabe19540af9e563d526113bb102e1b9b9fa73f9 upstream.
In drm_dp_mst_allocate_vcpi, it returns true in two paths,
but in one path, there is no reference couting decrease.
Signed-off-by: Insu Yun <wuninsu@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
||||
|
Nicolai Hähnle
|
drm/radeon: hold reference to fences in radeon_sa_bo_new
commit f6ff4f67cdf8455d0a4226eeeaf5af17c37d05eb upstream.
An arbitrary amount of time can pass between spin_unlock and
radeon_fence_wait_any, so we need to ensure that nobody frees the
fences from under us.
Based on the analogous fix for amdgpu.
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Greg Kroah-Hartman <greg…
|
|
||||
|
|
drm/radeon: mask out WC from BO on unsupported arches
commit c5244987394648913ae1a03879c58058a2fc2cee upstream.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
||||
|
Dave Airlie
|
drm: add helper to check for wc memory support
commit 4b0e4e4af6c6dc8354dcb72182d52c1bc55f12fc upstream.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoun…
|
|
||||
|
Slava Grigorev
|
drm/radeon: fix DP audio support for APU with DCE4.1 display engine
commit fe6fc1f132b4300c1f6defd43a5d673eb60a820d upstream.
Properly setup the DFS divider for DP audio for DCE4.1.
Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
||||
|
Slava Grigorev
|
drm/radeon: Add a common function for DFS handling
commit a64c9dab1c4d05c87ec8a1cb9b48915816462143 upstream.
Move encoding of DFS (digital frequency synthesizer) divider into a
separate function and improve calculation precision.
Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com…
|
|
||||
|
Slava Grigorev
|
drm/radeon: cleaned up VCO output settings for DP audio
commit c9a392eac18409f51a071520cf508c0b4ad990e2 upstream.
This is preparation for the fixes in the following patches.
Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.o…
|
|
||||
|
Alex Deucher
|
drm/radeon: properly byte swap vce firmware setup
commit cc78eb22885bba64445cde438ba098de0104920f upstream.
Firmware is LE. Need to properly byteswap some of the fields
so they are interpreted correctly by the driver on BE systems.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
||||
|
Alex Deucher
|
drm/radeon: clean up fujitsu quirks
commit 0eb1c3d4084eeb6fb3a703f88d6ce1521f8fcdd1 upstream.
Combine the two quirks.
bug:
https://bugzilla.kernel.org/show_bug.cgi?id=109481
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
||||
|
Slava Grigorev
|
drm/radeon: Fix "slow" audio over DP on DCE8+
commit ac4a9350abddc51ccb897abf0d9f3fd592b97e0b upstream.
DP audio is derived from the dfs clock.
Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
||||
|
Alex Deucher
|
drm/radeon: call hpd_irq_event on resume
commit dbb17a21c131eca94eb31136eee9a7fe5aff00d9 upstream.
Need to call this on resume if displays changes during
suspend in order to properly be notified of changes.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
||||
|
Felix Kuehling
|
drm/radeon: Fix off-by-one errors in radeon_vm_bo_set_addr
commit 42ef344c0994cc453477afdc7a8eadc578ed0257 upstream.
eoffset is sometimes treated as the last address inside the address
range, and sometimes as the first address outside the range. This
was resulting in errors when a test filled up the entire address
space. Make it consistent to always be the last address within the
range. Also fixed related errors when checking the VA limit and in
radeon_v…
|
|
||||
|
Mykola Lysenko
|
drm/dp/mst: deallocate payload on port destruction
commit 91a25e463130c8e19bdb42f2d827836c7937992e upstream.
This is needed to properly deallocate port payload
after downstream branch get unplugged.
In order to do this unplugged MST topology should
be preserved, to find first alive port on path to
unplugged MST topology, and send payload deallocation
request to branch device of found port.
For this mstb and port kref's are used in reversed
orde…
|
|
||||
|
Andrey Grodzovsky
|
drm/dp/mst: Reverse order of MST enable and clearing VC payload table.
commit c175cd16df272119534058f28cbd5eeac6ff2d24 upstream.
On DELL U3014 if you clear the table before enabling MST it sometimes
hangs the receiver.
Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gr…
|
|
||||
|
Hersen Wu
|
drm/dp/mst: move GUID storage from mgr, port to only mst branch
commit 5e93b8208d3c419b515fb75e2601931c027e12ab upstream.
Previous implementation does not handle case below: boot up one MST branch
to DP connector of ASIC. After boot up, hot plug 2nd MST branch to DP output
of 1st MST, GUID is not created for 2nd MST branch. When downstream port of
2nd MST branch send upstream request, it fails because 2nd MST branch GUID
is not available.
New Implementation:…
|
|
||||
|
Harry Wentland
|
drm/dp/mst: Calculate MST PBN with 31.32 fixed point
commit a9ebb3e46c7ef6112c0da466ef0954673ad36832 upstream.
Our PBN value overflows the 20 bits integer part of the 20.12
fixed point. We need to use 31.32 fixed point to avoid this.
This happens with display clocks larger than 293122 (at 24 bpp),
which we see with the Sharp (and similar) 4k tiled displays.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Deucher <alexande…
|
|
||||
|
Harry Wentland
|
drm: Add drm_fixp_from_fraction and drm_fixp2int_ceil
commit 64566b5e767f9bc3161055ca1b443a51afb52aad upstream.
drm_fixp_from_fraction allows us to create a fixed point directly
from a fraction, rather than creating fixed point values and dividing
later. This avoids overflow of our 64 bit value for large numbers.
drm_fixp2int_ceil allows us to return the ceiling of our fixed point
value.
[airlied: squash Jordan's fix]
32-bit-build-fix: Jordan Laza…
|
|
||||
|
Mykola Lysenko
|
drm/dp/mst: fix in RAD element access
commit 7a11a334aa6af4c65c6a0d81b60c97fc18673532 upstream.
This is needed to receive correct port
number from RAD, so MSTB could be found
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Mykola Lysenko <Mykola.Lysenko@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
||||
|
Mykola Lysenko
|
drm/dp/mst: fix in MSTB RAD initialization
commit 75af4c8c4c0f60d7ad135419805798f144e9baf9 upstream.
This fix is needed to support more then two
branch displays, so RAD address consist at
least of 2 elements
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Mykola Lysenko <Mykola.Lysenko@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
||||
|
Mykola Lysenko
|
drm/dp/mst: always send reply for UP request
commit 1f16ee7fa13649f4e55aa48ad31c3eb0722a62d3 upstream.
We should always send reply for UP request in order
to make downstream device clean-up resources appropriately.
Issue was that reply for UP request was sent only once.
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Mykola Lysenko <Mykola.Lysenko@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Gre…
|
|
||||
|
Mykola Lysenko
|
drm/dp/mst: process broadcast messages correctly
commit bd9343208704fcc70a5b919f228a7d26ae472727 upstream.
In case broadcast message received in UP request,
RAD cannot be used to identify message originator.
Message should be parsed, originator should be found
by GUID from parsed message.
Also reply with broadcast in case broadcast message
received (for now it is always broadcast)
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Mykol…
|
|
||||
|
Thierry Reding
|
drm/nouveau: platform: Fix deferred probe
commit 870571a5698b2e9d0f4d2e5c6245967b582aab45 upstream.
The error cleanup paths aren't quite correct and will crash upon
deferred probe.
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
||||
|
Ben Skeggs
|
drm/nouveau/disp/dp: ensure sink is powered up before attempting link training
commit 95664e66fad964c3dd7945d6edfb1d0931844664 upstream.
This can happen under some annoying circumstances, and is a quick fix
until more substantial changes can be made.
Fixed eDP mode changes on (at least) the Lenovo P50.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
||||
|
Mario Kleiner
|
drm/nouveau/display: Enable vblank irqs after display engine is on again.
commit ff683df7bf34f90766a50c7e7454e219aef2710e upstream.
In the display resume path, move the calls to drm_vblank_on()
after the point when the display engine is running again.
Since changes were made to drm_update_vblank_count() in Linux 4.4+
to emulate hw vblank counters via vblank timestamping, the function
drm_vblank_on() now needs working high precision vblank timestamping
and therefore wo…
|
|
||||
| 517 commits not shown. | ||||||