Wiki

[1.2.x firmware]

There are also global settings associated with all Horizontal Sliders. Global values are in the JSON as HSliders→property. In the sysex, global parameters for all sensor sections are clustered together in a single QuNeo Sysex Global Block.

For the Horizontal slider sensors, the following values are added to the sysex. JSON property is in the presets file at HSliders→HSliderX→property.

Value	JSON property	Note
Bank 1 Channel	hB1Channel
Bank 1 Location	hB1outLocation
Bank 1 Note	hB1outNote
Bank 1 Pressure Mode	hB1outNotePressMode	0=Normal, 1=Toggle
Bank 1 Pressure CC	hB1outPress	-1=Off
Bank 1 Pressure Value	hB1outPressValue	0=Continuous
Bank 1 Velocity	hB1outVelocityValue	0=Variable
Bank 1 Location Pass Thru Range	hB1outLocPassThruRange

Bank 2 Channel	hB2Channel
Bank 2 Location	hB2outLocation
Bank 2 Note	hB2outNote
Bank 2 Pressure Mode	hB2outNotePressMode	0=Normal, 1=Toggle
Bank 2 Pressure CC	hB2outPress	-1=Off
Bank 2 Pressure Value	hB2outPressValue	0=Continuous
Bank 2 Velocity	hB2outVelocityValue	0=Variable
Bank 2 Location Pass Thru Range	hB2outLocPassThruRange

Bank 3 Channel	hB3Channel
Bank 3 Location	hB3outLocation
Bank 3 Note	hB3outNote
Bank 3 Pressure Mode	hB3outNotePressMode	0=Normal, 1=Toggle
Bank 3 Pressure CC	hB3outPress	-1=Off
Bank 3 Pressure Value	hB3outPressValue	0=Continuous
Bank 3 Velocity	hB3outVelocityValue	0=Variable
Bank 3 Location Pass Thru Range	hB3outLocPassThruRange

Bank 4 Channel	hB4Channel
Bank 4 Location	hB4outLocation
Bank 4 Note	hB4outNote
Bank 4 Pressure Mode	hB4outNotePressMode	0=Normal, 1=Toggle
Bank 4 Pressure CC	hB4outPress	-1=Off
Bank 4 Pressure Value	hB4outPressValue	0=Continuous
Bank 4 Velocity	hB4outVelocityValue	0=Variable
Bank 4 Location Pass Thru Range	hB4outLocPassThruRange