Not detecting loop 2

[Javier Alay]

Hello LotGroup,

After testing the entry and exit stand we get that when a car needs to entry or exit and the stand sends the signal to open the gate and after the loop 1 has detected presence, then the stands wait a while and then send the close signal. It doesn’t matter if the loop 2 has detected presence, the stand sends the close signal anyway. We need that only if the loop 2 has detected presence then the close signal must be sent.

Best regards

[Ihor Bielykh]

Короче нужно что бы сигнал на закрытие ворот отправлялся только если петля 2 обнаруживает присутствие

[Ihor Bielykh]

simulate entry to the parking

Car entering the loop 1. Stand get the card. The barrier is open. Then car get away. Not to loop 2. The barrier is still open?

and

Car entering the loop 1. Stand get the card. The barrier is open. Car stay a minute on the loop 1. The barrier is still open?

[Javier Alay]

1. No, after the car get away the close signal is sent.
2. Yes, after a minute the car stays on loop 1 the barrier still open.

[Ihor Bielykh]

ok we will do this

[Сергей Холодный]

Fixed, please close the task

[Javier Alay]

Thanks for your help