Distribution of "ocaml_make" Copyright (C) 1999 - 2006 Markus Mottl - free to copy and modify! USE AT YOUR OWN RISK!
PREREQUISITES *** YOU WILL NEED GNU-MAKE VERSION >3.80 ***
Contents of this distribution
Changes - guess what? ;-)
OCamlMakefile - Makefile for easy handling of compilation of not so easy OCaml-projects. It generates dependencies of OCaml-files automatically, is able to handle "ocamllex"-, "ocamlyacc"-, IDL- and C-files, knows how to run preprocessors and generates native- or byte-code, as executable or as library - with thread-support if you want! Profiling and debugging support can be added on the fly! There is also support for installing libraries. Ah, yes, and you can also create toplevels from any sources: this allows you immediate interactive testing. Automatic generation of documentation is easy due to integration of support for OCamldoc.
README.txt - this file
calc/ - Directory containing a quite fully-featured example of what "OCamlMakefile" can do for you. This example makes use of "ocamllex", "ocamlyacc", IDL + C and threads.
camlp4/ - This simple example demonstrates how to automatically preprocess files with the camlp4-preprocessor.
gtk/ - Demonstration of how to use OCamlMakefile with GTK and threads. Courtesy of Tim Freeman email@example.com.
idl/ - Contains a very small example of how to use "camlidl" together with "OCamlMakefile". Also intended to show, how easy it is to interface OCaml and C.
threads/ - Two examples of how to use threads (originally posted by Xavier Leroy some time ago). Shows the use of "OCamlMakefile" in an environment of multiple compilation targets.
Why should you use it?
For several reasons:
It is well-tested (I use it in all of my projects).
In contrast to most other approaches it generates dependencies correctly by ensuring that all automatically generated OCaml-files exist before dependency calculation. This is the only way to guarantee that "ocamldep" works correctly.
It is extremely convenient (at least I think so ;-). Even quite complex compilation processes (see example "calc.ml") need very little information to work correctly - actually just about the minimum (file names of sources).
When you shouldn't use it...
In projects where every compilation unit needs different flags - but in such complicated cases you will be on your own anyway. Luckily, this doesn't happen too frequently...
How to use "OCamlMakefile" in your own project (Take a look at the examples for a quick introduction!)
Create your project-specific "Makefile" in the appropriate directory.
Now there are two ways of making use of "OCamlMakefile":
1) Have a look at the default settings in "OCamlMakefile" and set them to the values that are vaild on your system - whether the path to the standard libraries is ok, what executables shall be used, etc...
2) Copy it into the directory of the project to be compiled. Add "-include OCamlMakefile" as a last line of your "Makefile".
3) Put it somewhere else on the system. In this case you will have to set a variable "OCAMLMAKEFILE" in your project-specific "Makefile". This is the way in which the examples are written: so you need only one version of "OCamlMakefile" to manage all your projects! See the examples for details.
You should usually specify two further variables for your project:
- SOURCES (default: foo.ml)
- RESULT (default: foo)
Put all the sources necessary for a target into variable "SOURCES". Then set "RESULT" to the name of the target. If you want to generate libraries, you should not specify the suffix (".cma", ".cmxa", ".a") - it will be added automatically if you specify that you want to build a library.
** Don't forget to add the ".mli"-files, too! ** ** Don't forget that order of the source files matters! **
The order is important, because it matters during linking anyway due to potential side effects caused at program startup. This is why OCamlMakefile does not attempt to partially order dependencies by itself, which might confuse users even more. It just compiles and links OCaml-sources in the order specified by the user, even if it could determine automatically that the order cannot be correct.
The minimum of your "Makefile" looks like this (assuming that "OCamlMakefile" is in the search path of "make"):
This will assume that you want to compile a file "foo.ml" to a binary "foo".
Otherwise, your Makefile will probably contain something like this:
SOURCES = foo.ml RESULT = foo -include OCamlMakefile
Be careful with the names you put into these variables: if they are wrong, a "make clean" might erase the wrong files - but I know you will not do that ;-)
A simple "make" will generate a byte-code executable. If you want to change this, you may add an "all"-rule that generates something else.
SOURCES = foo.ml RESULT = foo all: native-code-library -include OCamlMakefile
This will build a native-code library "foo.cmxa" (+ "foo.a") from file "foo.ml".
You may even build several targets at once. To produce byte- and native-code executables with one "make", add the following rule:
all: byte-code native-code
You will probably want to use a different suffix for each of these targets so that the result will not be overwritten (see optional variables below for details).
You may also tell "make" at the command-line what kind of target to produce (e.g. "make nc"). Here all the possibilities with shortcuts between parenthesis:
- byte-code (bc)
- byte-code-nolink (bcnl) - no linking stage
- byte-code-library (bcl)
- native-code (nc)
- native-code-nolink (ncnl) - no linking stage
- native-code-library (ncl)
- debug-code (dc)
- debug-code-nolink (dcnl) - no linking stage
- debug-code-library (dcl)
- profiling-byte-code (pbc)
- profiling-byte-code-library (pbcl)
- profiling-native-code (pnc)
- profiling-native-code-library (pncl)
- byte-code-dll (bcd)
- native-code-dll (ncd)
- pack-byte-code (pabc)
- pack-native-code (panc)
- toplevel interpreter (top)
Here a short note concerning building and linking byte code libraries with C-files:
OCaml links C-object files only when they are used in an executable. After compilation they should be placed in some directory that is in your include path if you link your library against an executable.
It is sometimes more convenient to link all C-object files into a single C-library. Then you have to override the automatic link flags of your library using "-noautolink" and add another linkflag that links in your C-library explicitly.
What concerns maintainance:
"make clean" removes all (all!) automatically generated files - so again: make sure your variables are ok!
"make cleanup" is similar to "make clean" but leaves executables.
Another way to destroy some important files is by having "OCamlMakefile" automatically generate files with the same name. Read the documentation about the tools in the OCaml-distribution to see what kind of files are generated. "OCamlMakefile" additionally generates ('%' is basename of source file):
%_idl.c - "camlidl" generates a file "%.c" from "%.idl", but this is not such a good idea, because when generating native-code, both the file "%.c" and "%.ml" would generate files "%.o" which would overwrite each other. Thus, "OCamlMakefile" renames "%.c" to "%_idl.c" to work around this problem.
The dependencies are stored in three different subdirectories (dot dirs):
._d - contains dependencies for .ml-files ._bcdi - contains byte code dependencies for .mli-files ._ncdi - contains native code dependencies for .mli-files
The endings of the dependency files are: "%.d" for those generated from "%.ml"-files, "%.di" for ones derived from "%.mli"-files.
This is easy: if you discover a bug, just do a "make clean; make dc" to recompile your project with debugging information. Then you can immediately apply "ocamldebug" to the executable.
For generating code that can be profiled with "ocamlprof" (byte code) or "gprof" (native code), compile your project with one of the profiling targets (see targets above). E.g.:
* "make pbc" will build byte code that can be profiled with "ocamlprof". * "make pnc" will build native code that can be profiled with "gprof".
Please note that it is not currently possible to profile byte code with threads. OCamlMakefile will force an error if you try to do this.
A short hint for DEC Alpha-users (under Digital Unix): you may also compile your sources to native code without any further profiling options/targets. Then call "pixie my_exec", "my_exec" being your executable. This will produce (among other files) an executable "my_exec.pixie". Call it and it will produce profiling information which can be analysed using "prof -pixie my_exec". The resulting information is extremely detailed and allows analysis up to the clock cycle level...
Because one could employ any kind of program that reads from standard input and prints to standard output as preprocessor, there cannot be any default way to handle all of them correctly without further knowledge.
Therefore you have to cooperate a bit with OCamlMakefile to let preprocessing happen automatically. Basically, this only requires that you put a comment into the first line of files that should be preprocessed, e.g.:
(*pp cat *) ... rest of program ...
OCamlMakefile looks at the first line of your files, and if it finds a comment that starts with "(*pp", then it will assume that the rest of the comment tells it how to correctly call the appropriate preprocessor. In this case the program "cat" will be called, which will, of course, just output the source text again without changing it.
If you are, for example, an advocate of the new "revised syntax", which is supported by the camlp4 preprocessor, you could simply write:
(*pp camlp4r *) ... rest of program in revised syntax ...
Simple, isn't it?
If you want to write your own syntax extensions, just take a look at the example in the directory "camlp4": it implements the "repeat ... until" extension as described in the camlp4-tutorial.
Library (Un-)Installation Support
OCamlMakefile contains two targets using "ocamlfind" for this purpose:
* libinstall * libuninstall
These two targets require the existence of the variable "LIBINSTALL_FILES", which should be set to all the files that you want to install in the library directory (usually %.mli, %.cmi, %.cma, %.cmxa, %.a and possibly further C-libraries). The target "libinstall" has the dependency "all" to force compilation of the library so make sure you define target "all" in your Makefile appropriately.
The targets inform the user about the configured install path and ask for confirmation to (un)install there. If you want to use them, it is often a good idea to just alias them in your Makefile to "install" and "uninstall" respectively.
Two other targets allow installation of files into a particular directory (without using ocamlfind):
* rawinstall * rawuninstall
There is just one target for this:
The generated file can be used immediately for interactive sessions - even with scanners, parsers, C-files, etc.!
The following targets are supported:
- htdoc - generates HTML-documentation
- ladoc - generates Latex-documentation
- psdoc - generates PostScript-documentation
- pdfdoc - generates PDF-documentation
- doc - generates all supported forms of documentation
- clean-doc - generates all supported forms of documentation
All of them generate a sub-directory "doc". More precisely, for HTML it is "doc/$(RESULT)/html" and for Latex, PostScript and PDF the directory "doc/$(RESULT)/latex". See the OCamldoc-manual for details and the optional variables below for settings you can control.
You can have several targets in the same directory and manage them from within an single Makefile.
Give each subproject a name, e.g. "p1", "p2", etc. Then you export settings specific to each project by using variables of the form "PROJ_p1", "PROJ_p2", etc. E.g.:
define PROJ_p1 SOURCES="foo.ml main.ml" RESULT="p1" OCAMLFLAGS="-unsafe" endef export PROJ_p1 define PROJ_p2 ... endef export PROJ_p2
You may also export common settings used by all projects directly, e.g. "export THREADS = y".
Now it is a good idea to define, which projects should be affected by commands by default. E.g.:
ifndef SUBPROJS export SUBPROJS = p1 p2 endif
This will automatically generate a given target for all those subprojects if this variable has not been defined in the shell environment or in the command line of the make-invocation by the user. E.g., "make dc" will generate debug code for all subprojects.
Then you need to define a default action for your subprojects if "make" has been called without arguments:
This will build byte code by default for all subprojects.
Finally, you'll have to define a catch-all target that uses the target provided by the user for all subprojects. Just add (assuming that OCAMLMAKEFILE has been defined appropriately):
%: @make -f $(OCAMLMAKEFILE) subprojs SUBTARGET=$@
See the "threads"-directory in the distribution for a short example!
Optional variables that may be passed to "OCamlMakefile"
LIB_PACK_NAME - packs all modules of a library into a module whose name is given in variable "LIB_PACK_NAME".
RES_CLIB_SUF - when building a library that contains C-stubs, this variable controls the suffix appended to the name of the C-library (default: "_stubs").
THREADS - say "THREADS = yes" if you need thread support compiled in, otherwise leave it away.
VMTHREADS - say "VMTHREADS = yes" if you want to force VM-level scheduling of threads (byte-code only).
ANNOTATE - say "ANNOTATE = yes" to generate type annotation files (.annot) to support displaying of type information in editors.
USE_CAMLP4 - say "USE_CAMLP4 = yes" in your "Makefile" if you want to include the camlp4 directory during the build process, otherwise leave it away.
INCDIRS - directories that should be searched for ".cmi"- and ".cmo"-files. You need not write "-I ..." - just the plain names.
- LIBDIRS - directories that should be searched for libraries Also just put the plain paths into this variable
- EXTLIBDIRS - Same as "LIBDIRS", but paths in this variable are also added to the binary via the "-R"-flag so that dynamic libraries in non-standard places can be found.
RESULTDEPS - Targets on which results (executables or libraries) should additionally depend.
PACKS - adds packages under control of "findlib".
PREDS - specifies "findlib"-predicates.
LIBS - OCaml-libraries that should be linked (just plain names). E.g. if you want to link the Str-library, just write "str" (without quotes). The new OCaml-compiler handles libraries in such a way that they "remember" whether they have to be linked against a C-library and it gets linked in automatically. If there is a slash in the library name (such as "./str" or "lib/foo") then make is told that the generated files depend on the library. This helps to ensure that changes to your libraries are taken into account, which is important if you are regenerating your libraries frequently.
CLIBS - C-libraries that should be linked (just plain names).
PRE_TARGETS - set this to a list of target files that you want to have buildt before dependency calculation actually takes place. E.g. use this to automatically compile modules needed by camlp4, which have to be available before other modules can be parsed at all.
** WARNING **: the files mentioned in this variable will be removed when "make clean" is executed!
LIBINSTALL_FILES - the files of a library that should be installed using "findlib". Default:
$(RESULT).mli $(RESULT).cmi $(RESULT).cma $(RESULT).cmxa $(RESULT).a lib$(RESULT).a
OCAML_LIB_INSTALL - target directory for "rawinstall/rawuninstall". (default: $(OCAMLLIBPATH)/contrib)
DOC_FILES - names of files from which documentation is generated. (default: all .mli-files in your $(SOURCES)).
DOC_DIR - name of directory where documentation should be stored.
OCAMLFLAGS - flags passed to the compilers
- OCAMLBCFLAGS - flags passed to the byte code compiler only
OCAMLNCFLAGS - flags passed to the native code compiler only
OCAMLLDFLAGS - flags passed to the OCaml-linker
- OCAMLBLDFLAGS - flags passed to the OCaml-linker when linking byte code
OCAMLNLDFLAGS - flags passed to the OCaml-linker when linking native code
OCAMLMKLIB_FLAGS - flags passed to the OCaml library tool
OCAMLCPFLAGS - profiling flags passed to "ocamlcp" (default: "a")
PPFLAGS - additional flags passed to the preprocessor (default: none)
LFLAGS - flags passed to "ocamllex"
- YFLAGS - flags passed to "ocamlyacc"
IDLFLAGS - flags passed to "camlidl"
OCAMLDOCFLAGS - flags passed to "ocamldoc"
OCAMLFIND_INSTFLAGS - flags passed to "ocamlfind" during installation (default: none)
DVIPSFLAGS - flags passed to dvips (when generating documentation in PostScript).
STATIC - set this variable if you want to force creation of static libraries
CC - the C-compiler to be used
CXX - the C++-compiler to be used
CFLAGS - additional flags passed to the C-compiler. The flag "-DNATIVE_CODE" will be passed automatically if you choose to build native code. This allows you to compile your C-files conditionally. But please note: You should do a "make clean" or remove the object files manually or touch the %.c-files: otherwise, they may not be correctly recompiled between different builds.
CXXFLAGS - additional flags passed to the C++-compiler.
CPPFLAGS - additional flags passed to the C-preprocessor.
CFRAMEWORKS - Objective-C framework to pass to linker on MacOS X.
LDFLAGS - additional flags passed to the C-linker
RPATH_FLAG - flag passed through to the C-linker to set a path for dynamic libraries. May need to be set by user on exotic platforms. (default: "-R").
ELF_RPATH_FLAG - this flag is used to set the rpath on ELF-platforms. (default: "-R")
ELF_RPATH - if this flag is "yes", then the RPATH_FLAG will be passed by "-Wl" to the linker as normal on ELF-platforms.
OCAMLLIBPATH - path to the OCaml-standard-libraries (first default:
$(OCAMLC) -where) (second default: "/usr/local/lib/ocaml")
OCAML_DEFAULT_DIRS - additional path in which the user can supply default directories to his own collection of libraries. The idea is to pass this as an environment variable so that the Makefiles do not have to contain this path all the time.
OCAMLFIND - ocamlfind from findlib (default: "ocamlfind")
- OCAML - OCaml interpreter (default: "ocaml")
- OCAMLC - byte-code compiler (default: "ocamlc")
- OCAMLOPT - native-code compiler (default: "ocamlopt")
- OCAMLMKTOP - top-level compiler (default: "ocamlmktop")
- OCAMLCP - profiling byte-code compiler (default: "ocamlcp")
- OCAMLDEP - dependency generator (default: "ocamldep")
- OCAMLLEX - scanner generator (default: "ocamllex")
- OCAMLYACC - parser generator (default: "ocamlyacc")
- OCAMLMKLIB - tool to create libraries (default: "ocamlmklib")
- CAMLIDL - IDL-code generator (default: "camlidl")
- CAMLIDLDLL - IDL-utility (default: "camlidldll")
- CAMLP4 - camlp4 preprocessor (default: "camlp4")
OCAMLDOC - OCamldoc-command (default: "ocamldoc")
LATEX - Latex-processor (default: "latex")
- DVIPS - dvips-command (default: "dvips")
PS2PDF - PostScript-to-PDF converter (default: "ps2pdf")
CAMELEON_REPORT - report tool of Cameleon (default: "report")
CAMELEON_REPORT_FLAGS - flags for the report tool of Cameleon
CAMELEON_ZOGGY - zoggy tool of Cameleon (default: "camlp4o pa_zog.cma pr_o.cmo")
CAMELEON_ZOGGY_FLAGS - flags for the zoggy tool of Cameleon
OCAML_GLADECC - Glade compiler for OCaml (default: "lablgladecc2")
OCAML_GLADECC_FLAGS - flags for the Glade compiler
OXRIDL - OXRIDL-generator (default: "oxridl")
NOIDLHEADER - set to "yes" to prohibit "OCamlMakefile" from using the default camlidl-flag "-header".
NO_CUSTOM - Prevent linking in custom mode.
QUIET - unsetting this variable (e.g. "make QUIET=") will print all executed commands, including intermediate ones. This allows more comfortable debugging when things go wrong during a build.
REALLY_QUIET - when set this flag turns off output from some commands.
OCAMLMAKEFILE - location of (=path to) this "OCamlMakefile". Because it calles itself recursively, it has to know where it is. (default: "OCamlMakefile" = local directory)
BCSUFFIX - Suffix for all byte-code files. E.g.:
RESULT = foo BCSUFFIX = _bc This will produce byte-code executables/libraries with basename "foo_bc".
NCSUFFIX - Similar to "BCSUFFIX", but for native-code files.
TOPSUFFIX - Suffix added to toplevel interpreters (default: ".top")
SUBPROJS - variable containing the names of subprojects to be compiled.
SUBTARGET - target to be built for all projects in variable SUBPROJS.
Optional variables for Windows users
- MINGW - variable to detect the MINGW-environment
- MSVC - variable to detect the MSVC-compiler
Up-to-date information (newest release of distribution) can always be found at:
New York, 2011-03-23 Markus Mottl
e-mail: firstname.lastname@example.org WWW: http://www.ocaml.info