HA Daikin AC integration, Preset values

[Former user]

Not sure if this is an issue. The official Daikin Mobile app (IOS) does not seem to have the section of Preset values. While the HA Daikin AC Integration does have this Preset with 4 values; * None * Away * Eco * Boost However, when these options are selected, the option always toggles back to none, after a few seconds. Is this a bug, or just not supported?

[Fredrik Erlandsson]

There is no simple way of detecting which modes a particular model support, the current solution exposes modes even if they might not work on all units.

[Joseph Lauria]

I understand that not all can be supported, I’ve had a further look at the unit (Daikin Alira X) and the manual shows the following.

• ECONO / Outdoor unit Quiet / Combination of both / No setting
• Powerful Operation

So that may explain why its not selecting.

Thanks.

[Joseph Lauria]

Here is some further information, that may help for the unit.

http://192.168.0.229/aircon/get_model_info
ret=OK,model=B941,type=N,pv=3.40,cpv=3,cpv_minor=40,mid=NA,humd=0,s_humd=128,acled=1,land=0,elec=1,temp=1,temp_rng=0,m_dtct=1,ac_dst=--,disp_dry=0,dmnd=0,en_scdltmr=1,en_frate=1,en_fdir2=1,en_rtemp_a=0,en_spmode=0,en_ipw_sep=0,en_mompow=1,en_patrol=0,en_filter_sign=0,shtyp=0,en_cjlink=1,hmlmt_l=10.0,s_fdir_ud=01,s_fdir_ud_step=0,s_fdir_lr=01,s_fdir_lr_step=0

http://192.168.0.229/aircon/get_control_info
ret=OK,pow=0,mode=4,stemp=21.0,shum=0,adv=13,dt1=22.0,dt2=M,dt3=24.0,dt4=21.0,dh1=0,dh2=0,dh3=0,dh4=0,dhh=0,alert=16,f_rate=A,dfr1=A,dfr2=A,dfr3=A,dfr4=A,dfr6=A,dfrh=0,f_dir_ud=0,f_dir_lr=0,ndfd1=0S,ndfd2=00,ndfd3=0S,ndfd4=00,ndfd6=0S,ndfdh=00