# PyPI Metadata Formats / wheel-format.rst

PEP: 427 Title: The Wheel Binary Package Format 1.0 Version: $Revision$ Last-Modified: $Date$ Author: Daniel Holth <dholth@gmail.com> BDFL-Delegate: Nick Coghlan <ncoghlan@gmail.com> Discussions-To: <distutils-sig@python.org> Status: Accepted Type: Standards Track Content-Type: text/x-rst Created: 20-Sep-2012 Post-History: 18-Oct-2012, 15-Feb-2013 Resolution: http://mail.python.org/pipermail/python-dev/2013-February/124103.html

## Abstract

This PEP describes a built-package format for Python called "wheel".

A wheel is a ZIP-format archive with a specially formatted file name and the .whl extension. It contains a single distribution nearly as it would be installed according to PEP 376 with a particular installation scheme. Although a specialized installer is recommended, a wheel file may be installed by simply unpacking into site-packages with the standard 'unzip' tool while preserving enough information to spread its contents out onto their final paths at any later time.

## PEP Acceptance

This PEP was accepted, and the defined wheel version updated to 1.0, by Nick Coghlan on 16th February, 2013 [1]

## Rationale

Python needs a package format that is easier to install than sdist. Python's sdist packages are defined by and require the distutils and setuptools build systems, running arbitrary code to build-and-install, and re-compile, code just so it can be installed into a new virtualenv. This system of conflating build-install is slow, hard to maintain, and hinders innovation in both build systems and installers.

Wheel attempts to remedy these problems by providing a simpler interface between the build system and the installer. The wheel binary package format frees installers from having to know about the build system, saves time by amortizing compile time over many installations, and removes the need to install a build system in the target environment.

## Details

### Installing a wheel 'distribution-1.0-py32-none-any.whl'

Wheel installation notionally consists of two phases:

• Unpack.
1. Parse distribution-1.0.dist-info/WHEEL.
2. Check that installer is compatible with Wheel-Version. Warn if minor version is greater, abort if major version is greater.
3. If Root-Is-Purelib == 'true', unpack archive into purelib (site-packages).
4. Else unpack archive into platlib (site-packages).
1. Unpacked archive includes distribution-1.0.dist-info/ and (if there is data) distribution-1.0.data/.
2. Move each subtree of distribution-1.0.data/ onto its destination path. Each subdirectory of distribution-1.0.data/ is a key into a dict of destination directories, such as distribution-1.0.data/(purelib|platlib|headers|scripts|data). The initially supported paths are taken from distutils.command.install.
3. If applicable, update scripts starting with #!python to point to the correct interpreter.
4. Update distribution-1.0.dist.info/RECORD with the installed paths.
5. Remove empty distribution-1.0.data directory.
6. Compile any installed .py to .pyc. (Uninstallers should be smart enough to remove .pyc even if it is not mentioned in RECORD.)

### File Format

#### File name convention

The wheel filename is {distribution}-{version}(-{build tag})?-{python tag}-{abi tag}-{platform tag}.whl.

distribution
Distribution name, e.g. 'django', 'pyramid'.
version
Distribution version, e.g. 1.0.
build tag
Optional build number. Must start with a digit. A tie breaker if two wheels have the same version. Sort as the empty string if unspecified, else sort the initial digits as a number, and the remainder lexicographically.
language implementation and version tag
E.g. 'py27', 'py2', 'py3'.
abi tag
E.g. 'cp33m', 'abi3', 'none'.
platform tag
E.g. 'linux_x86_64', 'any'.

For example, distribution-1.0-1-py27-none-any.whl is the first build of a package called 'distribution', and is compatible with Python 2.7 (any Python 2.7 implementation), with no ABI (pure Python), on any CPU architecture.

The last three components of the filename before the extension are called "compatibility tags." The compatibility tags express the package's basic interpreter requirements and are detailed in PEP 425.

#### Escaping and Unicode

Each component of the filename is escaped by replacing runs of non-alphanumeric characters with an underscore _:

re.sub("[^\w\d.]+", "_", distribution, re.UNICODE)


The archive filename is Unicode. It will be some time before the tools are updated to support non-ASCII filenames, but they are supported in this specification.

The filenames inside the archive are encoded as UTF-8. Although some ZIP clients in common use do not properly display UTF-8 filenames, the encoding is supported by both the ZIP specification and Python's zipfile.

#### File contents

The contents of a wheel file, where {distribution} is replaced with the name of the package, e.g. beaglevote and {version} is replaced with its version, e.g. 1.0.0, consist of:

1. /, the root of the archive, contains all files to be installed in purelib or platlib as specified in WHEEL. purelib and platlib are usually both site-packages.

3. {distribution}-{version}.data/ contains one subdirectory for each non-empty install scheme key not already covered, where the subdirectory name is an index into a dictionary of install paths (e.g. data, scripts, include, purelib, platlib).

4. Python scripts must appear in scripts and begin with exactly b'#!python' in order to enjoy script wrapper generation and #!python rewriting at install time. They may have any or no extension.

6. {distribution}-{version}.dist-info/WHEEL is metadata about the archive itself in the same basic key: value format:

Wheel-Version: 1.0
Generator: bdist_wheel 1.0
Root-Is-Purelib: true
Tag: py2-none-any
Tag: py3-none-any
Build: 1

7. Wheel-Version is the version number of the Wheel specification.

8. Generator is the name and optionally the version of the software that produced the archive.

9. Root-Is-Purelib is true if the top level directory of the archive should be installed into purelib; otherwise the root should be installed into platlib.

10. Tag is the wheel's expanded compatibility tags; in the example the filename would contain py2.py3-none-any.

11. Build is the build number and is omitted if there is no build number.

12. A wheel installer should warn if Wheel-Version is greater than the version it supports, and must fail if Wheel-Version has a greater major version than the version it supports.

13. Wheel, being an installation format that is intended to work across multiple versions of Python, does not generally include .pyc files.

14. Wheel does not contain setup.py or setup.cfg.

This version of the wheel specification is based on the distutils install schemes and does not define how to install files to other locations. The layout offers a superset of the functionality provided by the existing wininst and egg binary formats.

##### The .dist-info directory
1. Wheel .dist-info directories include at a minimum METADATA, WHEEL, and RECORD.
2. METADATA is the package metadata, the same format as PKG-INFO as found at the root of sdists.
3. WHEEL is the wheel metadata specific to a build of the package.
4. RECORD is a list of (almost) all the files in the wheel and their secure hashes. Unlike PEP 376, every file except RECORD, which cannot contain a hash of itself, must include its hash. The hash algorithm must be sha256 or better; specifically, md5 and sha1 are not permitted, as signed wheel files rely on the strong hashes in RECORD to validate the integrity of the archive.
5. PEP 376's INSTALLER and REQUESTED are not included in the archive.
6. RECORD.jws is used for digital signatures. It is not mentioned in RECORD.
7. RECORD.p7s is allowed as a courtesy to anyone who would prefer to use S/MIME signatures to secure their wheel files. It is not mentioned in RECORD.
8. During extraction, wheel installers verify all the hashes in RECORD against the file contents. Apart from RECORD and its signatures, installation will fail if any file in the archive is not both mentioned and correctly hashed in RECORD.
##### The .data directory

Any file that is not normally installed inside site-packages goes into the .data directory, named as the .dist-info directory but with the .data/ extension:

distribution-1.0.dist-info/

distribution-1.0.data/


The .data directory contains subdirectories with the scripts, headers, documentation and so forth from the distribution. During installation the contents of these subdirectories are moved onto their destination paths.

### Signed wheel files

Wheel files include an extended RECORD that enables digital signatures. PEP 376's RECORD is altered to include a secure hash digestname=urlsafe_b64encode_nopad(digest) (urlsafe base64 encoding with no trailing = characters) as the second column instead of an md5sum. All possible entries are hashed, including any generated files such as .pyc files, but not RECORD which cannot contain its own hash. For example:

file.py,sha256=AVTFPZpEKzuHr7OvQZmhaU3LvwKz06AJw8mT\_pNh2yI,3144
distribution-1.0.dist-info/RECORD,,


The signature file(s) RECORD.jws and RECORD.p7s are not mentioned in RECORD at all since they can only be added after RECORD is generated. Every other file in the archive must have a correct hash in RECORD or the installation will fail.

If JSON web signatures are used, one or more JSON Web Signature JSON Serialization (JWS-JS) signatures is stored in a file RECORD.jws adjacent to RECORD. JWS is used to sign RECORD by including the SHA-256 hash of RECORD as the signature's JSON payload:

{ "hash": "sha256=ADD-r2urObZHcxBW3Cr-vDCu5RJwT4CaRTHiFmbcIYY" }


(The hash value is the same format used in RECORD.)

If RECORD.p7s is used, it must contain a detached S/MIME format signature of RECORD.

A wheel installer is not required to understand digital signatures but MUST verify the hashes in RECORD against the extracted file contents. When the installer checks file hashes against RECORD, a separate signature checker only needs to establish that RECORD matches the signature.

See

### Comparison to .egg

1. Wheel is an installation format; egg is importable. Wheel archives do not need to include .pyc and are less tied to a specific Python version or implementation. Wheel can install (pure Python) packages built with previous versions of Python so you don't always have to wait for the packager to catch up.
2. Wheel uses .dist-info directories; egg uses .egg-info. Wheel is compatible with the new world of Python packaging and the new concepts it brings.
3. Wheel has a richer file naming convention for today's multi-implementation world. A single wheel archive can indicate its compatibility with a number of Python language versions and implementations, ABIs, and system architectures. Historically the ABI has been specific to a CPython release, wheel is ready for the stable ABI.
4. Wheel is lossless. The first wheel implementation bdist_wheel always generates egg-info, and then converts it to a .whl. It is also possible to convert existing eggs and bdist_wininst distributions.
5. Wheel is versioned. Every wheel file contains the version of the wheel specification and the implementation that packaged it. Hopefully the next migration can simply be to Wheel 2.0.
6. Wheel is a reference to the other Python.

## FAQ

Wheel defines a .data directory. Should I put all my data there?
This specification does not have an opinion on how you should organize your code. The .data directory is just a place for any files that are not normally installed inside site-packages or on the PYTHONPATH. In other words, you may continue to use pkgutil.get_data(package, resource) even though those files will usually not be distributed in wheel's .data directory.
Why does wheel include attached signatures?
Attached signatures are more convenient than detached signatures because they travel with the archive. Since only the individual files are signed, the archive can be recompressed without invalidating the signature or individual files can be verified without having to download the whole archive.
Why does wheel allow JWS signatures?
The JOSE specifications of which JWS is a part are designed to be easy to implement, a feature that is also one of wheel's primary design goals. JWS yields a useful, concise pure-Python implementation.
Why does wheel also allow S/MIME signatures?

S/MIME signatures are allowed for users who need or want to use existing public key infrastructure with wheel.

Signed packages are only a basic building block in a secure package update system. Wheel only provides the building block.

What's the deal with "purelib" vs. "platlib"?

Wheel preserves the historic "purelib" vs. "platlib" distinction even though both map to the same install location in any system the author could find.

For example, a wheel with "Root-Is-Purelib: false" with all its files in {name}-{version}.data/purelib is equivalent to a wheel with "Root-Is-Purelib: true" with those same files in the root, and it is legal to have files in both the "purelib" and "platlib" categories.

In practice a wheel should have only one of "purelib" or "platlib" depending on whether it is pure Python or not and those files should be at the root.

## Appendix

# urlsafe-base64-nopad for Python 3