/***************************************************

	This is a first stab at modifying the code below, which
	originally worked on an Arduino, to work directly with 
	an ESP8266, it is not clever, it is not optimised yet
	but it works. I've tested in landscape mode using GPIOs
	4,5,12 and 15 (you may not need RST at all, I hooked it
	to ESP reset. I did check to see if you can do away with
	CE - you  can't).
	You need EASYGPIO for this - OR you could decide beforehand
	the pins you want to use and hard-code the IO which would make
	it marginally faster. Or you could go HERE
	https://github.com/MetalPhreak/ESP8266_SPI_Driver
	and transform this software by using hardware SPI on the ESP.
	I've not done this yet as I want to get the fonts working.
	
	Next step is to put the init code in FLASH but it gets messy
	(fonts will really need to be in flash) so I thought I'd 
	make this available before I start really hacking it up.
	
	17/09/2015 Peter Scargill - http://tech.scargill.net

	So in use I added this to my main code
	
	#include "QDTech/QDTech.h"

	Then this code to test... remember to scrap any other init or use
	of the relevant port bits in your code
	
	    QD_init(4,5,15,12,0,160,128);
		QD_setRotation(1);
		QD_setAddrWindow(0,0,160,128);
		QD_fillScreen(QD_Color565(255,0,0));
		QD_fillRect(30,30,90,90,QD_Color565(0,255,0));
		for (int qq=0; qq<160;qq++) QD_drawPixel(qq,qq,QD_Color565(0,0,255));
	
	There is referrence below to the stock Adafruit GFX library for fonts
	- not included that yet as that will need modifying to put the fonts
	in FLASH
/***************************************************
	This is a modification of the Adafruit SPI LCD library,
	customised for hardware SPI and the QDTech board 
	using a Samsung S6D02A1 chip.

	Most changes are made to the initialisation routine but
	non-Arduino code has been removed too.

	The initialisation sequence comes from Henning Karlsen's
	UTFT library: http://henningkarlsen.com

	Using the hardware SPI pins is highly recommeneded.
	
	You will also need the stock "Adafruit_GFX" library.
	https://github.com/adafruit/Adafruit-GFX-Library

	Gilchrist 30/1/2014
	6/2/14	1.1	Fixed RGB colour order error

/***************************************************
  This is a library for the Adafruit 1.8" SPI display.
  This library works with the Adafruit 1.8" TFT Breakout w/SD card
  ----> http://www.adafruit.com/products/358
  as well as Adafruit raw 1.8" TFT display
  ----> http://www.adafruit.com/products/618
 
  Check out the links above for our tutorials and wiring diagrams
  These displays use SPI to communicate, 4 or 5 pins are required to
  interface (RST is optional)
  Adafruit invests time and resources providing this open source code,
  please support Adafruit and open-source hardware by purchasing
  products from Adafruit!

  Written by Limor Fried/Ladyada for Adafruit Industries.
  MIT license, all text above must be included in any redistribution
 ****************************************************/

#include "osapi.h"
#include "easygpio/easygpio.h"

#define QDTech_TFTWIDTH  128
#define QDTech_TFTHEIGHT 160

// Some used command definitions kept from original
#define QDTech_INVOFF  0x20
#define QDTech_INVON   0x21
#define QDTech_DISPOFF 0x28
#define QDTech_DISPON  0x29
#define QDTech_CASET   0x2A
#define QDTech_RASET   0x2B
#define QDTech_RAMWR   0x2C
#define QDTech_RAMRD   0x2E

#define QDTech_PTLAR   0x30
#define QDTech_COLMOD  0x3A
#define QDTech_MADCTL  0x36

// Basic colour definitions
#define	QDTech_BLACK   0x0000
#define	QDTech_RED     0xF800
#define	QDTech_GREEN   0x07E0
#define	QDTech_BLUE    0x001F
#define QDTech_YELLOW  0xFFE0
#define QDTech_MAGENTA 0xF81F
#define QDTech_CYAN    0x07FF  
#define QDTech_WHITE   0xFFFF
#define QDTech_GREY    0x632C


  void     QD_init(uint8_t CS, uint8_t RS, uint8_t SID, uint8_t SCLK, uint8_t RST,uint8_t qwidth,uint8_t qheight ),
           QD_setAddrWindow(uint8_t x0, uint8_t y0, uint8_t x1, uint8_t y1),
           QD_pushColor(uint16_t color),
           QD_fillScreen(uint16_t color),
           QD_drawPixel(int16_t x, int16_t y, uint16_t color),
           QD_drawFastVLine(int16_t x, int16_t y, int16_t h, uint16_t color),
           QD_drawFastHLine(int16_t x, int16_t y, int16_t w, uint16_t color),
           QD_fillRect(int16_t x, int16_t y, int16_t w, int16_t h, uint16_t color),
           QD_setRotation(uint8_t r),
           QD_invertDisplay(uint8_t i);

uint16_t   QD_Color565(uint8_t r, uint8_t g, uint8_t b);

  uint8_t  tabcolor;

  void     QD_spiwrite(uint8_t),
           QD_writecommand(uint8_t c),
           QD_writedata(uint8_t d),
           QD_commandList(const uint8_t *addr),
           QD_commonInit(const uint8_t *cmdList);
           

  uint8_t  _cs, _rs, _rst, _sid, _sclk,
           colstart, rowstart,_width,_height,rotation; // some displays need this changed