+## This version of "The Script" August 2019 includes changes to handle latest Node/Node-Red updates on Raspbian
+## and to use official NR install script on Pi - also fixes to accomodate changed Grafana Repository.
+## NetTools added, Glances and Bottle commented out due to issus with their scripting.
+## Also got rid of NPM warnings
+## To use my own exact setup you will also need:
+## sudo python -m pip install --upgrade pip setuptools wheel
+## sudo pip install Adafruit-SSD1306
+## my /home/pi/fonts directory (ProggyTiny.ttf) - and sample programs /home/pi/stats.py and
+## stats32.py - this lot for people who want to run ssd1306 diaplays (32 or 64 px high) in Python rather than install i2c support in Node-Red
+## "The Script" is the product of many, many months of work and includes (if you select them):
+## (Raspberry Pi - tested on Raspbian Stretch Lite - https://downloads.raspberrypi.org/raspbian_lite_latest
+## but the full version works as well)
+## See also: BigTimer, ESP-GO and other included Node-Red nodes of mine
+## Many thanks to Antonio (Mr Shark) for his work on some of these changes.
+## Peter Scargill https://tech.scargill.net
+## Mosquitto (port 1883) with web sockets (Port 9001)
+## SQLITE ( xxx.xxx.xxx.xxx/phpliteadmin),
+## Node-Red (xxx.xxx.xxx:1880)
+## Node-Red-Dashboard (xxx.xxx.xxx.xxx:1880/ui)
+## Webmin (xxx.xxx.xxx:10000)
+## and Grafana (xxx.xxx.xxx:3000)
+## also web-page-based software like mc and /phpsysinfo
+## Jan 17 2019 I added nmap, netdiscover and also node-red-contrib-advanced-ping
+## July 2019 used 3-liner as in the blog to upgrade an RPI which had been set up initially using the script in Stretch - to Buster.
+## 1. Run initially ONLY as ROOT on a non-Raspberry Pi machine (or PI user on Raspberry Pi). If ROOT, PI user will be checked/created for you as the main
+## script must be run as pi.
+## User PI must be in the SUDO group. Other groups are added if needed by the script.
+## 2. When selecting GPIO for non-Raspberry Pi devices note - specific support for ODROID C2 only
+## 3. This script could take 3+ hours on a slow Raspberry Pi Zero Wifi.... steer away from midnight to avoid any updates
+## such as dietpi upgrades etc. //recommend NOT using this on Pi Zero as it will be VERY slow.
+## 4. For non-Raspberry Pi systems, when asked by Armbian to make a new user - don't bother - the script will do it.
+## 5. For Node-Red on Pi Zero, if the serial port won't connect - look at serial port permissions in /dev/
+## 6. Do not access this script as SUDO.
+## The easiest way to get the script on your machine is:
+## wget --no-check-certificate https://bitbucket.org/api/2.0/snippets/scargill/qexexb/master/files/script.sh
+## For Log2RAM customising see this - https://github.com/azlux/log2ram
+## See https://tech.scargill.net/orange-pi-pc-battle-of-the-pis/
+## We cannot answer questions on board/operating system combinations we have not tested. See notes below for tested combos.
+## 17/02/2019 Added pure-ftp
+## 07/02/2019 Separated NR into official NR install script, added tcpdump - not added fing but worth doing?
+## 20/08/2018 Fixed Java and settings.js generation, added menu option (default: UNCHECKED) to enable/disable Pi HW support (I2C, GPIO, Serial, etc)
+## 01/05/2018 InfluxDB/Grafana/Chronograf install, now works on every platform tested, and succesfully tested on Rock64+eMMc
+## 05/10/2017 Added glances - use directly - glances - or as webserver glances -w
+## 08/09/2017 Added name change for Node-Red flows files to generic
+## 31/08/2017 Scrapped JED as MC is much better - added rpi-clone which works a treat with NANOPI - indispensible on Raspberry Pi.
+## 30/08/2017 Changed Webmin to NOT be installed by default
+## 24/08/2017 Tested Ubuntu on Odroid C2 and Roseapple Pi
+## 23/08/2017 Tested on the NanoPi K2 board running Ubuntu, installs perfectly (but note that
+## FriendlyArm's WiringPi i2c is currently bust)
+## 18/08/2017 Modified to handle latest Raspbian Stretch - tested on RPI3
+## 10/08/2017 Added "nrlog" utility for viewing and "tailing" - i.e. monitoring node-red logs in colour in
+## 10/08/2017 Tested RPI3 - turns out the new GPIO nodes work perfectly on that - as does i2c
+## - commenting out the RPI contrib GPIO as it needs ROOT permissions!!!!!
+## see https://tech.scargill.net/the-real-raspberry-pi/
+## 29/07/2017 Added rule to help node-red-contrib-opi-gpio utility with various boards using GPIO. See docs
+## for that node - very promising - tried various nano boards with success
+## 24/07/2017 Tested on the new NanoPi Neo Plus2 - worked a treat - I2c running - lovely
+## 24/07/2017 Tested on a Raspberry Pi 2 using current Jessie
+## 24/07/2017 Tested NanoPi Neo Air using Ubuntu Core Xenial 4.11.2
+## 30/06/2017 added LOG FILE generation, same folder and name as script + datetime + .log - by MrShark
+## 26/06/2017 added support for Debian 9 (Stretch), right now only tested in VM - by MrShark
+## 26/04/2017 added option for Log2Ram
+## 26/04/2017 Updated NodeJS as they took the previous version off the server!!!
+## 29/03/2017 Tested on NanoPi Neo2 using Armbian nightly build of 27/03/2017 - added temperature and processor checks
+## 25/03/2017 Tested on NanoPi M1+, host updating added and defaults on inputs added
+## 18/03/2017 Tested on NanoPi M3
+## 16/03/2017 Modifications to handle experimental Android Phone setup
+## 10/03/2017 Modifications to detect and run with the Raspberry Pi Zero Lite (ARM6) (not recommended, Zero is very slow)
+## 30/01/2017 Minor change to let the script work on Mint Linux on a laptop (Looks like Ubuntu)
+## 14/01/2017 Updated webmin and habridge installations
+## 04/07/2017 OrangePi Plus 2 - thanks to blog reader RoyG for that
+## 26/12/2016 - complete re-hash for new menus
+## 02/12/2016 Tested Roseapple Pi using Armbian - for Node-Red serial, had to
+## enable permissions for the serial - everything worked first time
+## 16/5/2016 Tested on NanoPi M1 - (got 3 UARTS out of the M1)
+## 22/06/2016 tested on NanoPi NEO using Armbian Jessie Server
+## 28/12/2016 tested in DietPi and Xenial virtual machines
+## http://www.armbian.com/donate/?f=Armbian_5.20_Nanopineo_Debian_jessie_3.4.112.7z
+## NOTE:- removed node-red-contrib-admin from Node-red setup as you can now do installs in the palette manager
+## Note also - the PHONE setting is experimental assuming an Android phone, rooted and set up with "Linux Deploy"
+## as per the relevant blog entry on https://tech.scargill.net
+## Typically, sitting in your home directory (/home/pi) as user Pi you might want to use NANO editor to install this script
+## and after giving the script execute permission (sudo chmod 0744 /home/pi/script.sh)
+## you could run the file as ./script.sh
+## Note- on the Odroid C2 everything installed except webmin. After reboot this is what I did to get it running..
+## wget http://prdownloads.sourceforge.net/webadmin/webmin_1.850_all.deb
+## sudo dpkg --install webmin_1.850_all.deb
+## That complained about missing bits so I used...
+## sudo apt-get install -y perl libnet-ssleay-perl openssl libauthen-pam-perl
+## libpam-runtime libio-pty-perl apt-show-versions python
+## That seemed to fail and suggested I use...
+## sudo apt-get -y -f install
+## That installed the lot - working - something to do with it being 64 bits - but it works -
+## pi or root user and password and https://whatever:10000
+## Thanks for contributions from Antonio Fragola, Aidan Ruff and others. Thank you.
+## Node-Red security added as standard - using the ADMIN login. MQTT also has same ADMIN login.
+## Here at the beginning, a load of useful routines - see further down
+# Get time as a UNIX timestamp (seconds elapsed since Jan 1, 1970 0:00 UTC)
+IGreen='\e[0;92m' # Green
+IYellow='\e[0;93m' # Yellow
+IWhite='\e[0;97m' # White
+BIGreen='\e[1;92m' # Green
+BIYellow='\e[1;93m' # Yellow
+BIPurple='\e[1;95m' # Purple
+BIMagenta='\e[1;95m' # Purple
+BICyan='\e[1;96m' # Cyan
+BIWhite='\e[1;97m' # White
+# Permanent loop until both passwords are the same..
+ local VARIABLE_NAME=${1}
+ local VARIABLE_NAME_1="A"
+ local VARIABLE_NAME_2="B"
+ printf "${BICyan}$2: ${BIWhite}";
+ if [ "$3" = "hide" ] ; then
+ if [ "$3" = "hide" ] ; then
+ printf "\n${BICyan}$2 (again) : ${BIWhite}";
+ VARIABLE_NAME_2=$VARIABLE_NAME_1;
+ if [ $VARIABLE_NAME_1 != $VARIABLE_NAME_2 ] ; then
+ printf "\n${BIRed}Sorry, did not match!${BIWhite}\n";
+ readonly ${VARIABLE_NAME}=$VARIABLE_NAME_1;
+ if [ "$3" == "hide" ] ; then
+ while [ $sec -ge 0 ]; do
+ if [ $nohelp -eq 1 ]; then
+ if [ $hideother -eq 1 ]; then
+ printf "${BIPurple}Continue ${BIWhite}y${BIPurple}(es)/${BIWhite}n${BIPurple}(o)/${BIWhite}a${BIPurple}(ll)/${BIWhite}e${BIPurple}(nd)- ${BIGreen}00:0$min:$sec${BIPurple} remaining\033[0K\r${BIWhite}"
+ printf "${BIPurple}Continue ${BIWhite}y${BIPurple}(es)/${BIWhite}o${BIPurple}(ther)/${BIWhite}e${BIPurple}(nd)- ${BIGreen}00:0$min:$sec${BIPurple} remaining\033[0K\r${BIWhite}"
+ printf "${BIPurple}Continue ${BIWhite}y${BIPurple}(es)/${BIWhite}h${BIPurple}(elp)- ${BIGreen}00:0$min:$sec${BIPurple} remaining\033[0K\r${BIWhite}"
+ read -t 1 -n 1 user_response
+ if [ -n "$user_response" ]; then
+ printf "${BIGreen}%*s\n" $columns | tr ' ' -
+ printf "\n${BIGreen}%*s${BIWhite}\n" $columns | tr ' ' -
+ elapsedTime="$(($(date +%s)-startTime))"
+ printf "Elapsed: %02d hrs %02d mins %02d secs\n" "$((elapsedTime/3600%24))" "$((elapsedTime/60%60))" "$((elapsedTime%60))"
+ if [ "$user_response" != "a" ]; then
+ if [ "$user_response" = "e" ]; then
+ if [ "$user_response" = "n" ]; then
+ if [ "$user_response" = "o" ]; then
+ if [ "$user_response" = "h" ]; then
+ if [ "$user_response" = "y" ]; then
+ if [ $skip -eq 0 ]; then
+ printf "${BIYellow}$2${BIWhite}\n"
+ printf "${BICyan}%*s${BIWhite}\n" $columns '[SKIPPED]'
+ printf "${BICyan}%*s${BIWhite}\n" $columns '[OK]'
+CPU_TEMP_CURRENT='Unknown'
+CPU_TEMP_PRINT='Unknown'
+ACTIVECORES=$(grep -c processor /proc/cpuinfo)
+#Array to store possible locations for temp read.
+ '/sys/class/thermal/thermal_zone0/temp'
+ '/sys/devices/virtual/thermal/thermal_zone1/temp'
+ '/sys/devices/platform/sunxi-i2c.0/i2c-0/0-0034/temp1_input'
+ '/sys/class/hwmon/hwmon0/device/temp_label'
+ for ((i=0; i<${#aFP_TEMPERATURE[@]}; i++))
+ if [ -f "${aFP_TEMPERATURE[$i]}" ]; then
+ CPU_TEMP_CURRENT=$(cat "${aFP_TEMPERATURE[$i]}")
+ # - Some devices (pine) provide 2 digit output, some provide a 5 digit ouput.
+ # So, If the value is over 1000, we can assume it needs converting to 1'c
+ if (( $CPU_TEMP_CURRENT == 0 )); then
+ if (( $CPU_TEMP_CURRENT >= 1000 )); then
+ CPU_TEMP_CURRENT=$( echo -e "$CPU_TEMP_CURRENT" | awk '{print $1/1000}' | xargs printf "%0.0f" )
+ if (( $CPU_TEMP_CURRENT >= 70 )); then
+ CPU_TEMP_PRINT="\e[91mWarning: $CPU_TEMP_CURRENT'c\e[0m"
+ elif (( $CPU_TEMP_CURRENT >= 60 )); then
+ CPU_TEMP_PRINT="\e[38;5;202m$CPU_TEMP_CURRENT'c\e[0m"
+ elif (( $CPU_TEMP_CURRENT >= 50 )); then
+ CPU_TEMP_PRINT="\e[93m$CPU_TEMP_CURRENT'c\e[0m"
+ elif (( $CPU_TEMP_CURRENT >= 40 )); then
+ CPU_TEMP_PRINT="\e[92m$CPU_TEMP_CURRENT'c\e[0m"
+ elif (( $CPU_TEMP_CURRENT >= 30 )); then
+ CPU_TEMP_PRINT="\e[96m$CPU_TEMP_CURRENT'c\e[0m"
+ CPU_TEMP_PRINT="\e[96m$CPU_TEMP_CURRENT'c\e[0m"
+LOGFILE=$HOME/$0-`date +%Y-%m-%d_%Hh%Mm`.log
+ m=$((($SECONDS/60)%60));
+ printf "\r\n${BIGreen}==\r\n== ${BIYellow}$1"
+ printf "\r\n${BIGreen}== ${IBlue}Total: %02dh:%02dm:%02ds Cores: $ACTIVECORES Temperature: $CPU_TEMP_PRINT \r\n${BIGreen}==${IWhite}\r\n\r\n" $h $m $s;
+ echo -e "############################################################" >> $LOGFILE
+############################################################################
+## MAIN SECTION OF SCRIPT - action begins here
+#############################################################################
+printstatus "Welcome to THE SCRIPT!"
+export npm_config_loglevel=silent
+# install sudo on devices without it
+[ ! -x /usr/bin/sudo ] && apt-get $AQUIET -y update > /dev/null 2>&1 && apt-get $AQUIET -y install sudo 2>&1 | tee -a $LOGFILE
+# Whiptail menu may already be installed by default, on the other hand maybe not.
+sudo apt-get $AQUIET -y install whiptail ccze net-tools 2>&1 | tee -a $LOGFILE
+# Another way - Xenial should come up in upper case in $DISTRO
+echo -e OPSYS: $OPSYS >> $LOGFILE
+printstatus "Grabbing some preliminaries..."
+# test internet connection
+sudo chmod u+s /bin/ping
+if [[ "$(ping -c 1 23.1.68.60 | grep '100%' )" != "" ]]; then
+ printl "${IRed}!!!! No internet connection available, aborting! ${IWhite}\r\n"
+# install lsb_release on devices without it
+[ ! -x /usr/bin/lsb_release ] && apt-get $AQUIET -y update > /dev/null 2>&1 && apt-get $AQUIET -y install lsb-release 2>&1 | tee -a $LOGFILE
+DISTRO=$(/usr/bin/lsb_release -rs)
+echo -e DISTRO: $DISTRO >> $LOGFILE
+echo -e CHECK64: $CHECK64 >> $LOGFILE
+if [[ $OPSYS == *"UBUNTU"* ]]; then
+ if [ $DISTRO != "16.04" ] ; then
+ printl "${IRed}!!!! Wrong version of Ubuntu - not 16.04, aborting! ${IWhite}\r\n"
+# user pi existance/creation
+echo -e USER: $USER >> $LOGFILE
+if [[ $USER != "pi" ]]; then
+ if [[ $USER == "root" ]]; then
+ printf "\r\n${ICyan}Hello ROOT... ${IWhite}"
+ getent passwd pi > /dev/null 2>&1
+ printf "${ICyan}user \"pi\" exists, please log-out as root and run script as pi.${IWhite}\r\n\r\n"
+ usermod pi -g sudo -G ssh -a
+ echo "pi ALL=(ALL) NOPASSWD: ALL" > /etc/sudoers.d/pi
+ chmod 0440 /etc/sudoers.d/pi
+ chmod 4755 /usr/bin/sudo
+ cp $(readlink -f $0) /home/pi && chown pi.pi /home/pi/$0 && chmod 755 /home/pi/$0
+ chown pi.pi $LOGFILE && chmod 644 $LOGFILE && cp $LOGFILE /home/pi
+ adduser --quiet --disabled-password --shell /bin/bash --home /home/pi --gecos "User" pi
+ echo "pi:password" | chpasswd
+ usermod pi -g sudo -G ssh -a
+ echo "pi ALL=(ALL) NOPASSWD: ALL" > /etc/sudoers.d/pi
+ chmod 0440 /etc/sudoers.d/pi
+ chmod 4755 /usr/bin/sudo
+ printf "${ICyan}user PI created, password is \"password\". Please log-out as root and login as pi, and redo the procedure ${IWhite}\r\n\r\n"
+ cp $(readlink -f $0) /home/pi && chown pi.pi /home/pi/$0 && chmod 755 /home/pi/$0
+ chown pi.pi $LOGFILE && chmod 644 $LOGFILE && cp $LOGFILE /home/pi
+ printstatus "Leaving script as you are neither PI nor ROOT user."
+ sudo touch /etc/AlreadyRun
+if [ ! -f /etc/AlreadyRun ]; then
+ printstatus "Stopping IPV6 access"
+ echo "net.ipv6.conf.all.disable_ipv6 = 1" | sudo tee -a /etc/sysctl.conf > /dev/null 2>&1
+ echo "net.ipv6.conf.default.disable_ipv6 = 1" | sudo tee -a /etc/sysctl.conf > /dev/null 2>&1
+ echo "net.ipv6.conf.lo.disable_ipv6 = 1" | sudo tee -a /etc/sysctl.conf > /dev/null 2>&1
+ printstatus "Allow remote root login and speed up SSH"
+ sudo sed -i -e 's/PermitRootLogin no/PermitRootLogin yes/g' /etc/ssh/sshd_config
+ sudo sed -i -e 's/PermitRootLogin without-password/PermitRootLogin yes/g' /etc/ssh/sshd_config
+ sudo sed -i -e 's/PermitRootLogin prohibit-password/PermitRootLogin yes/g' /etc/ssh/sshd_config
+ sudo sed -i -e 's/TCPKeepAlive yes/TCPKeepAlive no/g' /etc/ssh/sshd_config
+ sudo sed -i '$ a UseDNS no' /etc/ssh/sshd_config
+ sudo sed -i '$ a ClientAliveInterval 30' /etc/ssh/sshd_config
+ sudo sed -i '$ a ClientAliveCountMax 100' /etc/ssh/sshd_config
+ sudo /etc/init.d/ssh restart 2>&1 | tee -a $LOGFILE
+ sudo update-alternatives --set newt-palette /etc/newt/palette.original 2>&1 | tee -a $LOGFILE
+ echo "Dpkg::Progress-Fancy \"1\";" | sudo tee /etc/apt/apt.conf.d/99progressbar > /dev/null
+ echo "APT::Color \"1\";" | sudo tee -a /etc/apt/apt.conf.d/99progressbar > /dev/null
+ if [[ $OPSYS != *"RASPBIAN"* ]]; then
+ printstatus "Adding user Pi permissions"
+ for additionalgroup in cdrom games users i2c adm gpio input sudo netdev audio video dialout plugdev bluetooth ; do
+ getent group ${additionalgroup} | grep -w -l pi || sudo adduser pi ${additionalgroup} 2>&1 | tee -a $LOGFILE
+ sudo apt-get install avahi-daemon avahi-utils -y 2>&1 | tee -a $LOGFILE
+ sudo sed -i -e 's/use-ipv6=yes/use-ipv6=no/g' /etc/avahi/avahi-daemon.conf
+ printstatus "Script is re-running, avoiding un-necessary repeats"
+if [[ $OPSYS == "LINUXMINT" ]]; then
+if [[ $OPSYS != *"RASPBIAN"* ]] && [[ $OPSYS != *"DEBIAN"* ]] && [[ $OPSYS != *"UBUNTU"* ]] && [[ $OPSYS != *"DIETPI"* ]]; then
+ printl "${BIRed}By the look of it, not one of the supported operating systems - aborting${BIWhite}\r\n"; exit
+if [[ $OPSYS == *"RASPBIAN"* ]];then
+ MYMENU=$(whiptail --title "Main Raspberry Pi Selection" --checklist \
+ "\nSelect items for your Pi as required then hit OK" 28 73 21 \
+ "quiet" "Quiet(er) install - untick for lots of info " ON \
+ "prereq" "Install general pre-requisites " ON \
+ "mosquitto" "Install Mosquitto" ON \
+ "apache" "Install Apache/PHP/SQLITE + PHPLITEADMIN " ON \
+ "nodenew" "Install NodeJS and NodeRed (NEW)" ON \
+ "nodejs" "Install NodeJS" OFF \
+ "nodered" "Install Node-Red" OFF \
+ "webmin" "Install Webmin" OFF \
+ "java" "Update Java" OFF \
+ "hwsupport" "Enable support for Serial, I2C, GPIO, etc" OFF \
+ "wiringpi" "Wiring Pi for the GPIO utility" OFF \
+ "phpsysinfo" "Install PHPSYSYINFO" ON \
+ "modpass" "Mod USER and ADMIN passwords (password123)" ON \
+ "addindex" "Add an index page and some CSS" ON \
+ "passwords" "Update ROOT and PI user passwords" OFF \
+ "habridge" "Install HA-bridge on port 82" OFF \
+ "rpiclone" "Install RPI-Clone" ON \
+ "log2ram" "Install Log2RAM default 40 Meg" OFF \
+ "grafana" "Install Grafana and InfluxDB" OFF \
+ "wolfram" "Remove Wolfram on a PI to save space" OFF \
+ "office" "Remove LibreOffice on PI to save space" OFF 3>&1 1>&2 2>&3)
+ MYMENU=$(whiptail --title "Main Non-Pi Selection" --checklist \
+ "\nSelect items as required then hit OK" 30 73 23 \
+ "quiet" "Quiet(er) install - untick for lots of info " ON \
+ "prereq" "Install general pre-requisites" ON \
+ "mosquitto" "Install Mosquitto" ON \
+ "apache" "Install Apache/PHP/SQLITE + PHPLITEADMIN" ON \
+ "nodenew" "Install NodeJS and NodeRed (NEW)" ON \
+ "nodejs" "Install NodeJS" OFF \
+ "nodered" "Install Node-Red" OFF \
+ "webmin" "Install Webmin" OFF \
+ "java" "Update Java" OFF \
+ "hwsupport" "Enable support for Serial, I2C, GPIO, etc" OFF \
+ "phone" "Install on Android Smartphone - see blog" OFF \
+ "odroid" "Install ODROID C2-specific GPIO" OFF \
+ "generich3" "Install GENERIC H3 GPIO (not Raspberry Pi) " OFF \
+ "phpsysinfo" "Install PHPSYSYINFO" ON \
+ "modpass" "Mod USER and ADMIN passwords (password123)" ON \
+ "addindex" "Add an index page and some CSS" ON \
+ "passwords" "Update ROOT and PI user passwords" OFF \
+ "habridge" "Install HA-bridge on port 82" OFF \
+ "rpiclone" "Install RPI-Clone" ON \
+ "log2ram" "Install Log2RAM default 40Meg" OFF \
+ "grafana" "Install Grafana and InfluxDB" OFF 3>&1 1>&2 2>&3)
+if [[ $MYMENU != *"quiet"* ]]; then
+ unset npm_config_loglevel
+if [[ $MYMENU == "" ]]; then
+ whiptail --title "Installation Aborted" --msgbox "Cancelled as requested." 8 78
+newhostname=$(whiptail --inputbox "Enter new HOST name\nLeave the default value or select something new" 8 60 $newhostname 3>&1 1>&2 2>&3)
+if [[ $MYMENU == *"modpass"* ]]; then
+ username=$(whiptail --inputbox "Enter a USER name (example user)\nSpecifically for Node-Red Dashboard" 8 60 $username 3>&1 1>&2 2>&3)
+ if [[ -z "${username// }" ]]; then
+ printf "No user name given - aborting\r\n"; exit
+ userpass=$(whiptail --passwordbox "Enter a user password" 8 60 3>&1 1>&2 2>&3)
+ if [[ -z "${userpass// }" ]]; then
+ printf "No user password given - aborting${BIWhite}\r\n"; exit
+ userpass2=$(whiptail --passwordbox "Confirm user password" 8 60 3>&1 1>&2 2>&3)
+ if [ $userpass2 == "" ]; then
+ printf "${BIRed}No password confirmation given - aborting${BIWhite}\r\n"; exit
+ if [ $userpass != $userpass2 ]
+ printf "${BIRed}Passwords don't match - aborting${BIWhite}\r\n"; exit
+ adminname=$(whiptail --inputbox "Enter an ADMIN name (example admin)\nFor Node-Red and MQTT" 8 60 $adminname 3>&1 1>&2 2>&3)
+ if [[ -z "${adminname// }" ]]; then
+ printf "${BIRed}No admin name given - aborting${BIWhite}\r\n"
+ adminpass=$(whiptail --passwordbox "Enter an admin password" 8 60 3>&1 1>&2 2>&3)
+ if [[ -z "${adminpass// }" ]]; then
+ printf "${BIRed}No user password given - aborting${BIWhite}\r\n"; exit
+ adminpass2=$(whiptail --passwordbox "Confirm admin password" 8 60 3>&1 1>&2 2>&3)
+ if [ $adminpass2 == "" ]; then
+ printf "${BIRed}No password confirmation given - aborting${BIWhite}\r\n"; exit
+ if [ $adminpass != $adminpass2 ]; then
+ printf "${BIRed}Passwords don't match - aborting${BIWhite}\r\n"; exit
+if [[ $MYMENU == *"passwords"* ]]; then
+ echo "Update your PI password"
+ echo "Update your ROOT password"
+if [[ $MYMENU == *"phone"* ]]; then
+ echo "en_US.UTF-8 UTF-8" | sudo tee -a /etc/locale.gen > /dev/null
+ # echo "service rsyslog stop" | sudo tee -a /etc/init.d/rc.local > /dev/null
+ sudo update-rc.d rsyslog disable 2>&1 | tee -a $LOGFILE
+ sudo locale-gen 2>&1 | tee -a $LOGFILE
+ sudo sed -i -e 's#exit 0##g' /etc/rc.local
+ echo "cd /home/pi/habridge" | sudo tee -a /etc/rc.local > /dev/null
+ echo "[ -f /home/pi/habridge/habridge-log.txt ] && rm /home/pi/habridge/habridge-log.txt" | sudo tee -a /etc/rc.local > /dev/null
+ echo "nohup /usr/bin/java -jar -Dserver.port=82 -Dconfig.file=/home/pi/habridge/data/habridge.config /home/pi/habridge/ha-bridge.jar > /home/pi/habridge/habridge-log.txt 2>&1 &" | sudo tee -a /etc/rc.local > /dev/null
+ echo "chmod 777 /home/pi/habridge/habridge-log.txt" | sudo tee -a /etc/rc.local > /dev/null
+ echo "exit 0" | sudo tee -a /etc/rc.local > /dev/null
+if [[ $MYMENU == *"wolfram"* ]]; then
+ printstatus "Removing Wolfram"
+ sudo apt-get $AQUIET -y purge wolfram-engine 2>&1 | tee -a $LOGFILE
+if [[ $MYMENU == *"office"* ]]; then
+ printstatus "Removing LibreOffice"
+ sudo apt-get $AQUIET -y remove --purge libreoffice* 2>&1 | tee -a $LOGFILE
+if [[ $MYMENU == *"prereq"* ]]; then
+ printstatus "Installing pre-requisites (this could take some time)"
+ sudo apt-get $AQUIET -y autoremove 2>&1 | tee -a $LOGFILE
+ sudo apt-get $AQUIET update 2>&1 | tee -a $LOGFILE
+ sudo apt-get $AQUIET -y upgrade 2>&1 | tee -a $LOGFILE
+ # fix for RPI treating PING as a root function - by Dave
+ sudo setcap cap_net_raw=ep /bin/ping > /dev/null 2>&1
+ sudo setcap cap_net_raw=ep /bin/ping6 > /dev/null 2>&1
+ # Prerequisite suggested by Julian and adding in python-dev - and stuff I've added for SAMBA and telnet, and Common utilities
+ sudo apt-get install $AQUIET -y apt-utils 2>&1 | tee -a $LOGFILE # a line on its own, as on some boards caused problems on next one...
+ sudo apt-get install $AQUIET -y nmap netdiscover sysfsutils tcpdump pure-ftpd wget ssh bash-completion unzip build-essential git python-serial scons libboost-filesystem-dev libboost-program-options-dev libboost-system-dev libsqlite3-dev subversion libcurl4-openssl-dev libusb-dev python-dev cmake curl telnet usbutils gawk jq pv samba samba-common samba-common-bin winbind dosfstools parted gcc python-pip htop python-smbus mc cu mpg123 screen 2>&1 | tee -a $LOGFILE
+ sudo pip -q install psutil 2>&1 | tee -a $LOGFILE
+ sudo -H pip -q install feedparser 2>&1 | tee -a $LOGFILE
+ # This line to ensure name is resolved from hosts FIRST
+ sudo sed -i '/\[global\]/a name resolve order = hosts wins bcast' /etc/samba/smb.conf
+ if [[ $MYMENU == *"hwsupport"* ]]; then
+ sudo apt-get install $AQUIET -y i2c-tools 2>&1 | tee -a $LOGFILE
+if [[ $MYMENU == *"mosquitto"* ]]; then
+ printstatus "Installing Mosquitto with Websockets"
+ if [[ $OPSYS == *"UBUNTU"* ]]; then
+ sudo apt-get $AQUIET -y install mosquitto mosquitto-clients 2>&1 | tee -a $LOGFILE
+ [ $? -eq 0 ] && mosquitto=1 # mosquitto installed
+ if [[ $OPSYS == *"BIAN"* ]] && [[ $DISTRO == *"8."* ]]; then
+ wget http://repo.mosquitto.org/debian/mosquitto-repo.gpg.key -a $LOGFILE -O - | sudo apt-key add -
+ echo "deb http://repo.mosquitto.org/debian jessie main" |sudo tee /etc/apt/sources.list.d/mosquitto-jessie.list
+ sudo apt-get $AQUIET -y update && sudo apt-get $AQUIET -y install mosquitto mosquitto-clients 2>&1 | tee -a $LOGFILE
+ [ $? -eq 0 ] && mosquitto=1 # mosquitto installed
+ # add mosquitto mods+pass ONLY if it was installed...
+ if [ $mosquitto -eq 1 ]; then
+ sudo bash -c "echo -e \"listener 9001\nprotocol websockets\nlistener 1883\nallow_anonymous false\npassword_file /etc/mosquitto/passwords\" > /etc/mosquitto/conf.d/websockets.conf"
+ sudo touch /etc/mosquitto/passwords
+ sudo mosquitto_passwd -b /etc/mosquitto/passwords $adminname $adminpass
+ if [[ $OPSYS == *"RASPBIAN"* ]]; then
+Description=Mosquitto MQTT Broker daemon\n\
+ConditionPathExists=/etc/mosquitto/mosquitto.conf\n\
+Requires=network.target\n\
+PIDFile=/var/run/mosquitto.pid\n\
+ExecStart=/usr/sbin/mosquitto -c /etc/mosquitto/mosquitto.conf -d\n\
+ExecReload=/bin/kill -HUP $MAINPID\n\
+WantedBy=multi-user.target\n" | sudo tee /lib/systemd/system/mosquitto
+ sudo systemctl start mosquitto 2>&1 | tee -a $LOGFILE
+ sudo systemctl enable mosquitto 2>&1 | tee -a $LOGFILE
+ echo "alias mqttlog='tail -f /var/log/mosquitto/mosquitto.log | ccze -A'" | sudo tee -a /etc/bash.bashrc > /dev/null 2>&1
+ printl "${IRed}!!!! Mosquitto not installed! ${IWhite}\r\n"
+if [[ $MYMENU == *"wiringpi"* ]]; then
+ printstatus "Installing WiringPi"
+ wget --no-check-certificate https://project-downloads.drogon.net/wiringpi-latest.deb -a $LOGFILE
+ sudo dpkg -i wiringpi-latest.deb
+ printl "${IRed}!!!! Wiringpi not installed! ${IWhite}\r\n"
+# Moved sqlite3 so that node-red sql node will install
+# use back facing quotes in here - no idea why.
+# Changed the order of installation of Apache etc to solve issues with ARMBIAN
+if [[ $MYMENU == *"apache"* ]]; then
+ printstatus "Installing Apache/PHP and Sqlite"
+ sudo groupadd -f -g33 www-data
+ if [[ $OPSYS != *"UBUNTU"* ]]; then
+ if [[ $OPSYS == *"BIAN"* ]] && [[ $DISTRO == *"10"* ]]; then
+ sudo apt-get $AQUIET -y install apache2 libapache2-mod-php7.3 sqlite3 php-sqlite3 php-xml php-mbstring 2>&1 | tee -a $LOGFILE
+ if [[ $OPSYS == *"BIAN"* ]] && [[ $DISTRO == *"9."* ]]; then
+ sudo apt-get $AQUIET -y install apache2 libapache2-mod-php7.0 sqlite3 php-sqlite3 php-xml php-mbstring 2>&1 | tee -a $LOGFILE
+ if [[ $OPSYS == *"BIAN"* ]] && [[ $DISTRO == *"8"* ]]; then
+ sudo apt-get $AQUIET -y install apache2 libapache2-mod-php5 sqlite3 php5-sqlite 2>&1 | tee -a $LOGFILE
+ [ $? -eq 0 ] && apache=1 # apache installed
+ sudo apt-get $AQUIET -y install apache2 libapache2-mod-php7.0 sqlite3 php-sqlite3 php-xml php-mbstring 2>&1 | tee -a $LOGFILE
+ [ $? -eq 0 ] && apache=1 # apache installed
+ # if apache installed and /var/www/html exists, go on...
+ if [ $apache -eq 1 ] && [ -d /var/www/html ]; then
+ sudo mkdir phpliteadmin
+ #sudo wget --no-check-certificate http://bitbucket.org/phpliteadmin/public/downloads/phpLiteAdmin_v1-9-7-1.zip -a $LOGFILE
+ sudo wget --no-check-certificate https://www.phpliteadmin.org/phpliteadmin-dev.zip -a $LOGFILE
+ sudo unzip phpliteadmin-dev.zip 2>&1 | tee -a $LOGFILE
+ sudo mv phpliteadmin.php index.php
+ sudo mv phpliteadmin.config.sample.php phpliteadmin.config.php
+ sudo wget --no-check-certificate http://bitbucket.org/phpliteadmin/public/downloads/phpliteadmin_themes_2016-02-29.zip -a $LOGFILE
+ sudo unzip phpliteadmin_themes_2016-02-29.zip 2>&1 | tee -a $LOGFILE
+ sudo sed -i -e 's#\$directory = \x27.\x27;#\$directory = \x27/home/pi/dbs/\x27;#g' /var/www/html/phpliteadmin/phpliteadmin.config.php
+ sudo sed -i -e "s#\$password = \x27admin\x27;#\$password = \x27$adminpass\x27;#g" /var/www/html/phpliteadmin/phpliteadmin.config.php
+ sudo sed -i -e "s#\$subdirectories = false;#\$subdirectories = true;#g" /var/www/html/phpliteadmin/phpliteadmin.config.php
+ printl "${IRed}!!!! PHPLITEADMIN not installed! ${IWhite}\r\n"
+ cd ; rm -rf /var/www/html/phpliteadmin
+ sqlite3 /home/pi/dbs/iot.db << EOF
+ CREATE TABLE IF NOT EXISTS \`pinDescription\` (
+ \`pinID\` INTEGER PRIMARY KEY NOT NULL,
+ \`pinNumber\` varchar(2) NOT NULL,
+ \`pinDescription\` varchar(255) NOT NULL
+ CREATE TABLE IF NOT EXISTS \`pinDirection\` (
+ \`pinID\` INTEGER PRIMARY KEY NOT NULL,
+ \`pinNumber\` varchar(2) NOT NULL,
+ \`pinDirection\` varchar(3) NOT NULL
+ CREATE TABLE IF NOT EXISTS \`pinStatus\` (
+ \`pinID\` INTEGER PRIMARY KEY NOT NULL,
+ \`pinNumber\` varchar(2) NOT NULL,
+ \`pinStatus\` varchar(1) NOT NULL
+ CREATE TABLE IF NOT EXISTS \`users\` (
+ \`userID\` INTEGER PRIMARY KEY NOT NULL,
+ \`username\` varchar(28) NOT NULL,
+ \`password\` varchar(64) NOT NULL,
+ \`salt\` varchar(8) NOT NULL
+ CREATE TABLE IF NOT EXISTS \`device_list\` (
+ \`device_name\` varchar(80) NOT NULL DEFAULT '',
+ \`device_description\` varchar(80) DEFAULT NULL,
+ \`device_attribute\` varchar(80) DEFAULT NULL,
+ \`logins\` int(11) DEFAULT NULL,
+ \`creation_date\` datetime DEFAULT NULL,
+ \`last_update\` datetime DEFAULT NULL,
+ PRIMARY KEY (\`device_name\`)
+ CREATE TABLE IF NOT EXISTS \`readings\` (
+ \`recnum\` INTEGER PRIMARY KEY,
+ \`location\` varchar(20),
+ \`value\` int(11) NOT NULL,
+ \`logged\` timestamp not NULL DEFAULT CURRENT_TIMESTAMP ,
+ \`device_name\` varchar(40) not null,
+ \`topic\` varchar(40) not null
+ CREATE TABLE IF NOT EXISTS \`pins\` (
+ \`gpio0\` int(11) NOT NULL DEFAULT '0',
+ \`gpio1\` int(11) NOT NULL DEFAULT '0',
+ \`gpio2\` int(11) NOT NULL DEFAULT '0',
+ \`gpio3\` int(11) NOT NULL DEFAULT '0'
+ INSERT INTO PINS VALUES(0,0,0,0);
+ CREATE TABLE IF NOT EXISTS \`temperature_record\` (
+ \`device_name\` varchar(64) NOT NULL,
+ \`rec_num\` INTEGER PRIMARY KEY,
+ \`temperature\` float NOT NULL,
+ \`date_time\` timestamp NOT NULL DEFAULT CURRENT_TIMESTAMP
+ CREATE TABLE IF NOT EXISTS \`Device\` (
+ \`DeviceID\` INTEGER PRIMARY KEY,
+ \`DeviceName\` TEXT NOT NULL
+ CREATE TABLE IF NOT EXISTS \`DeviceData\` (
+ \`DataID\` INTEGER PRIMARY KEY,
+ \`DataName\` TEXT, FOREIGN KEY(DeviceID ) REFERENCES Device(DeviceID)
+ CREATE TABLE IF NOT EXISTS \`Data\` (
+ SequenceID INTEGER PRIMARY KEY,
+ \`DeviceID\` INTEGER NOT NULL,
+ \`DataID\` INTEGER NOT NULL,
+ \`DataValue\` NUMERIC NOT NULL,
+ \`epoch\` NUMERIC NOT NULL,
+ \`timestamp\` DATETIME NOT NULL DEFAULT CURRENT_TIMESTAMP , FOREIGN KEY(DataID, DeviceID ) REFERENCES DeviceData(DAtaID, DeviceID )
+ chmod 666 /home/pi/dbs/iot.db
+ printl "${IRed}!!!! Apache+PHP+SQLITE+PHPLITEADMIN NOT INSTALLED! ${IWhite}\r\n"
+if [[ $MYMENU == *"nodenew"* ]]; then
+ printstatus "Installing NodeJS and NodeRed"
+## bash <(curl -sL https://raw.githubusercontent.com/node-red/raspbian-deb-package/master/resources/update-nodejs-and-nodered)
+ curl -sL https://raw.githubusercontent.com/node-red/raspbian-deb-package/master/resources/update-nodejs-and-nodered > update-nodejs-and-nodered
+ echo 143.204.15.127 deb.nodesource.com | sudo tee -a /etc/hosts
+ chmod +x update-nodejs-and-nodered
+ echo y | ./update-nodejs-and-nodered
+cd && sudo cp /var/log/nodered-install.log . && sudo chown pi.pi ./nodered-install.log && cd ~/.node-red/
+ printstatus "Installing Nodes (could take some time)"
+# TAKEN OUT node-red-contrib-graphs - I dont use it, most likely defunct - no work done on it in 3 years
+ for addonnodes in moment node-red-contrib-config node-red-contrib-grove node-red-contrib-diode node-red-contrib-bigtimer \
+ node-red-contrib-esplogin node-red-contrib-timeout node-red-node-openweathermap node-red-node-google node-red-contrib-advanced-ping node-red-node-emoncms node-red-node-geofence node-red-contrib-moment node-red-contrib-particle \
+ node-red-contrib-web-worldmap node-red-contrib-ramp-thermostat node-red-contrib-fs-ops node-red-contrib-infuxdb \
+ node-red-contrib-isonline node-red-node-ping node-red-node-random node-red-node-smooth node-red-contrib-npm node-red-node-arduino \
+ node-red-contrib-file-function node-red-contrib-boolean-logic node-red-contrib-blynk-ws node-red-contrib-telegrambot node-red-contrib-dsm node-red-contrib-ftp \
+ node-red-dashboard node-red-node-darksky node-red-contrib-owntracks node-red-contrib-alexa-local node-red-contrib-amazon-echo node-red-contrib-alexa-notifyme node-red-contrib-heater-controller ; do
+ printstatus "Installing node \"${addonnodes}\""
+ npm $NQUIET install --save ${addonnodes} 2>&1 | tee -a $LOGFILE
+ printstatus "Installing node \"node-red-node-sqlite\""
+ npm $NQUIET install --unsafe-perm node-red-node-sqlite 2>&1 | tee -a $LOGFILE
+ if [[ $MYMENU == *"hwsupport"* ]]; then
+ printstatus "Installing node \"i2c-bus\""
+ npm $NQUIET install i2c-bus 2>&1 | tee -a $LOGFILE
+ printstatus "Installing node \"bcryptjs\""
+ sudo npm $NQUIET install bcryptjs 2>&1 | tee -a $LOGFILE
+ if [[ $MYMENU == *"hwsupport"* ]]; then
+ ## this last bit of code is to ensure that node-red-contrib-opi-gpio can gain access to port bits!!
+ getent group gpio || sudo groupadd gpio 2>&1 | tee -a $LOGFILE
+ getent group gpio | grep -w -l pi || sudo adduser pi gpio 2>&1 | tee -a $LOGFILE
+ [ ! -f /etc/udev/rules.d/99-com.rules ] && echo "KERNEL==\"gpio*\", RUN=\"/bin/sh -c 'chgrp -R gpio /sys/%p /sys/class/gpio && chmod -R g+w /sys/%p /sys/class/gpio'\"" | sudo tee -a /etc/udev/rules.d/99-com.rules > /dev/null
+ if [[ $OPSYS == *"RASPBIAN"* ]]; then
+ sudo sed -i -e 's#exit 0#chmod 777 /dev/ttyAMA0\nexit 0#g' /etc/rc.local
+ sudo apt-get -y install python{,3}-rpi.gpio 2>&1 | tee -a $LOGFILE
+ if [[ $MYMENU == *"generich3"* ]]; then
+ npm $NQUIET install node-red-contrib-opi-gpio 2>&1 | tee -a $LOGFILE
+ sudo sed -i -e 's#exit 0#chmod 777 /dev/ttyS*\nexit 0#g' /etc/rc.local
+ sudo wget -a $LOGFILE $AQUIET http://tech.scargill.net/iot/settings.txt -O settings.js
+ bcryptadminpass=$(node -e "console.log(require('bcryptjs').hashSync(process.argv[1], 8));" $adminpass)
+ bcryptuserpass=$(node -e "console.log(require('bcryptjs').hashSync(process.argv[1], 8));" $userpass)
+ # echo Encrypted password: $bcryptpass
+ cp settings.js settings.js.bak-pre-crypt
+ sed -i -e "s#\/\/adminAuth#adminAuth#" /home/pi/.node-red/settings.js
+ sed -i -e "s#\/\/httpNodeAuth#httpNodeAuth#" /home/pi/.node-red/settings.js
+ sed -i -e "s#NRUSERNAMEA#$adminname#" /home/pi/.node-red/settings.js
+ sed -i -e "s#NRPASSWORDA#$bcryptadminpass#" /home/pi/.node-red/settings.js
+ sed -i -e "s#NRUSERNAMEU#$username#" /home/pi/.node-red/settings.js
+ sed -i -e "s#NRPASSWORDU#$bcryptuserpass#" /home/pi/.node-red/settings.js
+ if [[ $MYMENU == *"hwsupport"* ]]; then
+ sed -i -e "s#\/\/var i2c#var i2c#" /home/pi/.node-red/settings.js
+ sed -i -e "s#\/\/i2c#i2c#" /home/pi/.node-red/settings.js
+ sudo systemctl enable nodered.service 2>&1 | tee -a $LOGFILE
+ ## add a nice little command line utility (nrlog) for showing and tailing Node-Red scripts in colour
+ echo "alias nrlog='sudo journalctl -f -n 50 -u nodered -o cat | ccze -A'" | sudo tee -a /etc/bash.bashrc > /dev/null 2>&1
+if [[ $MYMENU == *"nodejs"* ]]; then
+ printstatus "Installing NodeJS"
+ if [[ $(uname -m) == *"armv6"* ]]; then
+ printstatus "Installing ARM6 version"
+ wget --no-check-certificate https://nodejs.org/dist/$LATESTNODE/node-$LATESTNODE-linux-armv6l.tar.xz -a $LOGFILE
+ [ $? -eq 0 ] && nodejs=1
+ pv node-$LATESTNODE-linux-armv6l.tar.xz | tar -xJf -
+ cd node-$LATESTNODE-linux-armv6l
+ sudo cp -R * /usr/local/
+ rm -f node-$LATESTNODE-linux-armv6l.tar.xz
+ if [[ $CHECK64 == *"aarch64"* ]]; then
+ printstatus "Installing ARM64 version"
+ wget --no-check-certificate https://nodejs.org/dist/$LATESTNODE/node-$LATESTNODE-linux-arm64.tar.xz -a $LOGFILE
+ [ $? -eq 0 ] && nodejs=1
+ pv node-$LATESTNODE-linux-arm64.tar.xz | tar -xJf -
+ cd node-$LATESTNODE-linux-arm64
+ sudo cp -R * /usr/local/
+ rm -f node-$LATESTNODE-linux-arm64.tar.xz
+ sudo apt-get $AQUIET -y remove --purge nodejs nodejs-legacy npm 2>&1 | tee -a $LOGFILE
+ sudo apt-get $AQUIET -y autoremove 2>&1 | tee -a $LOGFILE
+ curl -sL https://deb.nodesource.com/setup_6.x > nodesetup.sh
+ #curl -sL https://deb.nodesource.com/setup_8.x > nodesetup.sh
+ sudo bash nodesetup.sh 2>&1 | tee -a $LOGFILE
+ sudo apt-get $AQUIET -y install nodejs 2>&1 | tee -a $LOGFILE
+ sudo apt-get $AQUIET -y install npm 2>&1 | tee -a $LOGFILE
+ sudo npm $NQUIET install npm@latest -g 2>&1 | tee -a $LOGFILE
+ # sudo apt-get $AQUIET -y remove --purge npm 2>&1 | tee -a $LOGFILE
+ # sudo apt-get $AQUIET -y autoremove 2>&1 | tee -a $LOGFILE
+ sudo ln -sf /usr/local/bin/npm /usr/bin
+ [ $? -eq 0 ] && nodejs=1
+ if [ $nodejs -ne 1 ]; then
+ printl "${IRed}!!!! NodeJS not installed! ${IWhite}\r\n"
+if [[ $MYMENU == *"nodered"* ]]; then
+ printstatus "Installing Node-Red"
+ # if nodejs does not exist, abort node-red install
+ if [ -f /usr/bin/node ] || [ -f /usr/local/bin/node ]; then
+ # prevent double additions to settings.js if it exists and is already modified
+ if [ $(grep public ~/.node-red/settings.js 2> /dev/null | wc -l) -ne 1 ]; then
+ # sudo npm $NQUIET install -g npm node-gyp node-pre-gyp 2>&1 | tee -a $LOGFILE
+ sudo npm $NQUIET install -g --unsafe-perm node-red 2>&1 | tee -a $LOGFILE
+ if [[ $MYMENU == *"phone"* ]]; then
+ sudo wget -a $LOGFILE -O /etc/init.d/nodered https://gist.githubusercontent.com/bigmonkeyboy/9962293/raw/0fe19671b1aef8e56cbcb20f6677173f8495e539/nodered
+ sudo chmod 755 /etc/init.d/nodered && sudo update-rc.d nodered defaults 2>&1 | tee -a $LOGFILE
+ echo | openssl s_client -showcerts -servername raw.githubusercontent.com -connect raw.githubusercontent.com:443 2>/dev/null | openssl x509 -inform pem -noout -text > /dev/null 2>&1
+ [[ $? -ne 0 ]] && echo 151.101.128.133 raw.githubusercontent.com | sudo tee -a /etc/hosts
+ sudo wget -a $LOGFILE --no-check-certificate https://raw.githubusercontent.com/node-red/raspbian-deb-package/master/resources/nodered.service -O /lib/systemd/system/nodered.service
+ sudo wget -a $LOGFILE --no-check-certificate https://raw.githubusercontent.com/node-red/raspbian-deb-package/master/resources/node-red-start -O /usr/bin/node-red-start
+ sudo wget -a $LOGFILE --no-check-certificate https://raw.githubusercontent.com/node-red/raspbian-deb-package/master/resources/node-red-stop -O /usr/bin/node-red-stop
+ #sudo sed -i -e 's#=pi#=%USER#g' /lib/systemd/system/nodered.service
+ sudo chmod +x /usr/bin/node-red-st*
+ sudo systemctl daemon-reload 2>&1 | tee -a $LOGFILE
+ printstatus "Installing Nodes (could take some time)"
+ for addonnodes in moment node-red-contrib-config node-red-contrib-grove node-red-contrib-diode node-red-contrib-bigtimer \
+ node-red-contrib-esplogin node-red-contrib-timeout node-red-node-openweathermap node-red-node-google node-red-contrib-advanced-ping node-red-node-emoncms node-red-node-geofence node-red-contrib-moment node-red-contrib-particle \
+ node-red-contrib-web-worldmap node-red-contrib-ramp-thermostat node-red-contrib-fs-ops node-red-contrib-infuxdb \
+ node-red-contrib-isonline node-red-node-ping node-red-node-random node-red-node-smooth node-red-contrib-npm node-red-node-arduino \
+ node-red-contrib-file-function node-red-contrib-boolean-logic node-red-contrib-blynk-ws node-red-contrib-telegrambot node-red-contrib-dsm node-red-contrib-ftp \
+ node-red-dashboard node-red-node-darksky node-red-contrib-owntracks node-red-contrib-alexa-local node-red-contrib-amazon-echo node-red-contrib-alexa-notifyme node-red-contrib-heater-controller ; do
+ printstatus "Installing node \"${addonnodes}\""
+ npm $NQUIET install --save ${addonnodes} 2>&1 | tee -a $LOGFILE
+ printstatus "Installing node \"node-red-node-sqlite\""
+ npm $NQUIET install --unsafe-perm node-red-node-sqlite 2>&1 | tee -a $LOGFILE
+ if [[ $MYMENU == *"hwsupport"* ]]; then
+ printstatus "Installing nodes \"serialport and i2c-bus\""
+ npm $NQUIET install node-red-node-serialport i2c-bus 2>&1 | tee -a $LOGFILE
+ printstatus "Installing node \"bcryptjs\""
+ sudo npm $NQUIET install bcryptjs 2>&1 | tee -a $LOGFILE
+ if [[ $MYMENU == *"hwsupport"* ]]; then
+ ## this last bit of code is to ensure that node-red-contrib-opi-gpio can gain access to port bits!!
+ getent group gpio || sudo groupadd gpio 2>&1 | tee -a $LOGFILE
+ getent group gpio | grep -w -l pi || sudo adduser pi gpio 2>&1 | tee -a $LOGFILE
+ [ ! -f /etc/udev/rules.d/99-com.rules ] && echo "KERNEL==\"gpio*\", RUN=\"/bin/sh -c 'chgrp -R gpio /sys/%p /sys/class/gpio && chmod -R g+w /sys/%p /sys/class/gpio'\"" | sudo tee -a /etc/udev/rules.d/99-com.rules > /dev/null
+ if [[ $OPSYS == *"RASPBIAN"* ]]; then
+ sudo sed -i -e 's#exit 0#chmod 777 /dev/ttyAMA0\nexit 0#g' /etc/rc.local
+ sudo apt-get -y install python{,3}-rpi.gpio 2>&1 | tee -a $LOGFILE
+ #npm $NQUIET install node-red-contrib-gpio 2>&1 | tee -a $LOGFILE
+ #npm $NQUIET install raspi-io 2>&1 | tee -a $LOGFILE
+ if [[ $MYMENU == *"generich3"* ]]; then
+ npm $NQUIET install node-red-contrib-opi-gpio 2>&1 | tee -a $LOGFILE
+ sudo sed -i -e 's#exit 0#chmod 777 /dev/ttyS*\nexit 0#g' /etc/rc.local
+ sudo wget -a $LOGFILE $AQUIET http://tech.scargill.net/iot/settings.txt -O settings.js
+ #sudo service nodered start 2>&1 | tee -a $LOGFILE
+ #while [ ! -f settings.js ] ; do sudo sleep 1 ; done
+ #sudo service nodered stop 2>&1 | tee -a $LOGFILE
+ bcryptadminpass=$(node -e "console.log(require('bcryptjs').hashSync(process.argv[1], 8));" $adminpass)
+ bcryptuserpass=$(node -e "console.log(require('bcryptjs').hashSync(process.argv[1], 8));" $userpass)
+ # echo Encrypted password: $bcryptpass
+ cp settings.js settings.js.bak-pre-crypt
+ sed -i -e "s#\/\/adminAuth#adminAuth#" /home/pi/.node-red/settings.js
+ sed -i -e "s#\/\/httpNodeAuth#httpNodeAuth#" /home/pi/.node-red/settings.js
+ sed -i -e "s#NRUSERNAMEA#$adminname#" /home/pi/.node-red/settings.js
+ sed -i -e "s#NRPASSWORDA#$bcryptadminpass#" /home/pi/.node-red/settings.js
+ sed -i -e "s#NRUSERNAMEU#$username#" /home/pi/.node-red/settings.js
+ sed -i -e "s#NRPASSWORDU#$bcryptuserpass#" /home/pi/.node-red/settings.js
+ if [[ $MYMENU == *"hwsupport"* ]]; then
+ sed -i -e "s#\/\/var i2c#var i2c#" /home/pi/.node-red/settings.js
+ sed -i -e "s#\/\/i2c#i2c#" /home/pi/.node-red/settings.js
+ #datetimestamp=`date +%Y-%m-%d_%Hh%Mm`
+ # this will add the TOP piece of code for non-vol variables in settings.js
+ #gawk -i inplace -v INPLACE_SUFFIX=-$datetimestamp '!found && /module.exports/ { print " var mySettings;\n try {\n mySettings = require(\"/home/pi/.node-red/redvars.js\");\n } catch(err) {\n mySettings = {};\n }\n"; found=1 } 1' settings.js
+ #sudo sed -i -e 's#functionGlobalContext: {#\/\/ functionGlobalContext: {#g' settings.js
+ #sudo sed -i -e 's#\s\s\s\s\},# \/\/ },#g' settings.js
+ #sudo sed -i -e 's#^\}#,#g' settings.js
+ #sudo echo " " > tmpfile
+ #sudo echo " httpStatic: '/home/pi/.node-red/public'," >> tmpfile
+ #sudo echo " functionGlobalContext: {" >> tmpfile
+ #sudo echo " os:require('os')," >> tmpfile
+ #sudo echo " moment:require('moment'), " >> tmpfile
+ #sudo echo " fs:require('fs'), " >> tmpfile
+ #sudo echo " i2c:require('i2c-bus'), " >> tmpfile
+ #sudo echo " mySettings:mySettings " >> tmpfile
+ #sudo echo " }," >> tmpfile
+ #sudo echo " " >> tmpfile
+ #sudo echo " adminAuth: {" >> tmpfile
+ #sudo echo " type: \"credentials\"," >> tmpfile
+ #sudo echo " users: [{" >> tmpfile
+ #sudo echo " username: \"$adminname\"," >> tmpfile
+ #sudo echo " password: \"$bcryptadminpass\"," >> tmpfile
+ #sudo echo " permissions: \"*\"" >> tmpfile
+ #sudo echo " }]" >> tmpfile
+ #sudo echo " }," >> tmpfile
+ #sudo echo " " >> tmpfile
+ #sudo echo " httpNodeAuth: {user:\"$username\", pass:\"$bcryptuserpass\"}" >> tmpfile
+ #sudo echo "}" >> tmpfile
+ #sudo cat tmpfile >> settings.js
+ printl "${IRed}!!!! Settings.JS already present and modified, skipping! ${IWhite}\r\n"
+ #sed -i -e 's#\/\/\s*var fs = require("fs");#var fs = require("fs");\nvar i2c = require("i2c-bus");#' /home/pi/.node-red/settings.js
+ ## The next two lines are new (Sept 2017) and change the flows files to non-host-specific names - good for copying
+ #sed -i -e 's#\/\/flowFile#flowFile#' /home/pi/.node-red/settings.js
+ #sed -i -e 's#\/\/flowFilePretty#flowFilePretty#' /home/pi/.node-red/settings.js
+ #sed -i -e 's#\/\/ Customising#},\n\n \/\/ Customising#' /home/pi/.node-red/settings.js
+ if [[ $MYMENU == *"phone"* ]]; then
+ cd && sudo mv /etc/init.d/sendsigs .
+ sudo systemctl enable nodered.service 2>&1 | tee -a $LOGFILE
+ ## add a nice little command line utility (nrlog) for showing and tailing Node-Red scripts in colour
+ echo "alias nrlog='sudo journalctl -f -n 50 -u nodered -o cat | ccze -A'" | sudo tee -a /etc/bash.bashrc > /dev/null 2>&1
+ printl "${IRed}!!!! Node-Red not installed! ${IWhite}\r\n"
+if [[ $MYMENU == *"hwsupport"* ]]; then
+ if [[ $OPSYS != *"RASPBIAN"* ]]; then
+ if [[ $MYMENU == *"odroid"* ]]; then
+ printstatus "Installing Odroid GPIO"
+ git clone https://github.com/hardkernel/wiringPi.git 2>&1 | tee -a $LOGFILE
+ ./build 2>&1 | tee -a $LOGFILE
+ sudo chmod a+s /usr/local/bin/gpio
+ if [[ $MYMENU == *"generich3"* ]]; then
+ printstatus "Installing H3 GPIO"
+ # Install NanoPi H3 based IO library
+ git clone https://github.com/zhaolei/WiringOP.git -b h3 2>&1 | tee -a $LOGFILE
+ sudo ./build 2>&1 | tee -a $LOGFILE
+if [[ $MYMENU == *"webmin"* ]]; then
+ printstatus "Installing Webmin at port 10000 (could take some time)"
+ #wget --no-check-certificate http://prdownloads.sourceforge.net/webadmin/webmin-1.831.tar.gz
+ #sudo gunzip -q webmin-1.831.tar.gz
+ #tar -xf webmin-1.831.tar
+ #sudo ./setup.sh /usr/local/Webmin
+ wget -a $LOGFILE http://www.webmin.com/jcameron-key.asc -O - | sudo apt-key add -
+ echo "deb http://download.webmin.com/download/repository sarge contrib" | sudo tee /etc/apt/sources.list.d/webmin.list > /dev/null
+ sudo apt-get $AQUIET -y update 2>&1 | tee -a $LOGFILE
+ sudo apt-get $AQUIET -y install webmin 2>&1 | tee -a $LOGFILE
+ # http vs https: if you want unsecure http access on port 10000 instead of https, uncomment next line
+ sudo sed -i -e 's#ssl=1#ssl=0#g' /etc/webmin/miniserv.conf
+# This works a treat on the NanoPi NEO using H3 and Armbian - should not do any harm on other systems as it's not installed!
+if [[ $MYMENU == *"opi"* ]]; then
+ printstatus "Installing Armbian Monitor"
+ sudo armbianmonitor -r 2>&1 | tee -a $LOGFILE
+if [[ $MYMENU == *"java"* ]]; then
+ printstatus "Installing/Updating Java"
+ sudo apt-get $AQUIET -y install software-properties-common dirmngr 2>&1 | tee -a $LOGFILE
+ sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv-keys EEA14886 2>&1 | tee -a $LOGFILE
+ sudo apt-key adv --keyserver hkp://pgpkeys.mit.edu:80 --recv-keys C2518248EEA14886 2>&1 | tee -a $LOGFILE
+ sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys EA8CACC073C3DB2A 2>&1 | tee -a $LOGFILE
+ if [[ $OPSYS == *"BIAN"* ]] && [[ $DISTRO == *"10"* ]]; then
+ sudo apt-get $AQUIET -y install openjdk-11-jre 2>&1 | tee -a $LOGFILE
+# leave the Oracle Java commented out until Oracle fixes the 404 file not found error in ITS official package...
+# echo "deb http://ppa.launchpad.net/linuxuprising/java/ubuntu bionic main" | sudo tee /etc/apt/sources.list.d/java.list
+# echo "deb-src http://ppa.launchpad.net/linuxuprising/java/ubuntu bionic main" | sudo tee -a /etc/apt/sources.list.d/java.list
+# sudo apt-get $AQUIET update 2>&1 | tee -a $LOGFILE
+# echo oracle-java12-installer shared/accepted-oracle-license-v1-2 select true | sudo /usr/bin/debconf-set-selections
+# echo oracle-java12-installer shared/accepted-oracle-licence-v1-2 boolean true | sudo /usr/bin/debconf-set-selections
+# echo debconf shared/accepted-oracle-license-v1-1 select true | sudo debconf-set-selections
+# echo debconf shared/accepted-oracle-license-v1-1 seen true | sudo debconf-set-selections
+# sudo apt-get $AQUIET -y install oracle-java12-installer oracle-java12-set-default 2>&1 | tee -a $LOGFILE
+ echo "deb http://ppa.launchpad.net/webupd8team/java/ubuntu xenial main" | sudo tee /etc/apt/sources.list.d/java.list
+ echo "deb-src http://ppa.launchpad.net/webupd8team/java/ubuntu xenial main" | sudo tee -a /etc/apt/sources.list.d/java.list
+ sudo apt-get $AQUIET update 2>&1 | tee -a $LOGFILE
+ echo debconf shared/accepted-oracle-license-v1-1 select true | sudo debconf-set-selections
+ echo debconf shared/accepted-oracle-license-v1-1 seen true | sudo debconf-set-selections
+ sudo apt-get $AQUIET -y install oracle-java8-installer 2>&1 | tee -a $LOGFILE
+if [[ $MYMENU == *"habridge"* ]]; then
+ printstatus "Installing HA-Bridge on port 82"
+ #sudo sed -i -e 's#80#81#g' /etc/apache2/ports.conf
+ #sudo sed -i -e 's#80#81#g' /etc/apache2/sites-enabled/000-default.conf
+ #sudo service apache2 restart
+ ## now to install HA-Bridge on port 82 and get it running from power up.
+ #wget https://github.com/bwssytems/ha-bridge/releases/download/v3.5.1/ha-bridge-3.5.1.jar -O ~/habridge/ha-bridge.jar
+ curl -s https://api.github.com/repos/bwssytems/ha-bridge/releases/latest | jq --raw-output '.assets[0] | .browser_download_url' | wget -i - -O ~/habridge/ha-bridge.jar
+Description=HA Bridge\n\
+ExecStart=/usr/bin/java -jar -Dserver.port=82 -Dconfig.file=/home/pi/habridge/data/habridge.config /home/pi/habridge/ha-bridge.jar\n\
+ WantedBy=multi-user.target\n" | sudo tee /lib/systemd/system/habridge.service
+ sudo systemctl start habridge.service 2>&1 | tee -a $LOGFILE
+ sudo systemctl enable habridge.service 2>&1 | tee -a $LOGFILE
+if [[ $MYMENU == *"phpsysinfo"* ]]; then
+ printstatus "Installing PHPSysInfo"
+ # sudo apt-get $AQUIET -y install phpsysinfo
+ # sudo ln -s /usr/share/phpsysinfo /var/www/html
+ if [ -d /var/www/html ]; then
+ sudo git clone https://github.com/phpsysinfo/phpsysinfo.git 2>&1 | tee -a $LOGFILE
+ sudo cp /var/www/html/phpsysinfo/phpsysinfo.ini.new /var/www/html/phpsysinfo/phpsysinfo.ini
+ printl "${IRed}!!!! Apache+PHP not installed! ${IWhite}\r\n"
+# you may want to use these on a Pi or elsewhere to force either a graphical or command line environment
+#sudo systemctl set-default multi-user.target
+#sudo systemctl set-default graphical.target
+if [[ $MYMENU == *"rpiclone"* ]]; then
+ printstatus "Installing RPI-Clone"
+ sudo git clone https://github.com/billw2/rpi-clone.git
+ sudo cp rpi-clone /usr/local/sbin
+if [[ $MYMENU == *"log2ram"* ]]; then
+ printstatus "Installing Log2Ram"
+ git clone https://github.com/azlux/log2ram.git 2>&1 | tee -a $LOGFILE
+ sudo ./install.sh 2>&1 | tee -a $LOGFILE
+# Drop in an index file and css for a menu page
+if [[ $MYMENU == *"addindex"* ]]; then
+ printstatus "Adding index page and CSS"
+ if [ -d /var/www/html ]; then
+ sudo wget -a $LOGFILE $AQUIET http://www.scargill.net/iot/index.html -O /var/www/html/index.html
+ sudo wget -a $LOGFILE $AQUIET http://www.scargill.net/iot/reset.css -O /var/www/html/reset.css
+ printl "${IRed}!!!! Apache+PHP not installed! ${IWhite}\r\n"
+if [[ $MYMENU == *"grafana"* ]]; then
+ printstatus "Installing Grafana and Influxdb"
+ sudo apt-get $AQUIET -y update 2>&1 | tee -a $LOGFILE
+ sudo apt-get $AQUIET install -y apt-transport-https curl 2>&1 | tee -a $LOGFILE
+ curl -sL https://repos.influxdata.com/influxdb.key | sudo apt-key add -
+ test $VERSION_ID = "8" && echo "deb https://repos.influxdata.com/debian jessie stable" | sudo tee /etc/apt/sources.list.d/influxdb.list
+ test $VERSION_ID = "9" && echo "deb https://repos.influxdata.com/debian stretch stable" | sudo tee /etc/apt/sources.list.d/influxdb.list
+ test $VERSION_ID = "10" && echo "deb https://repos.influxdata.com/debian buster stable" | sudo tee /etc/apt/sources.list.d/influxdb.list
+ test $VERSION_ID = "16.04" && echo "deb https://repos.influxdata.com/ubuntu xenial stable" | sudo tee /etc/apt/sources.list.d/influxdb.list
+ curl -sL https://bintray.com/user/downloadSubjectPublicKey?username=bintray | sudo apt-key add -
+ curl -sL https://packages.grafana.com/gpg.key | sudo apt-key add -
+ [[ $OPSYS == *"BIAN"* ]] && [[ $(uname -m) == *"armv6"* ]] && echo "deb https://dl.bintray.com/fg2it/deb-rpi-1b jessie main" | sudo tee -a /etc/apt/sources.list.d/grafana.list
+ [[ $OPSYS == *"BIAN"* ]] && [[ $(uname -m) != *"armv6"* ]] && echo "deb https://packages.grafana.com/oss/deb stable main" | sudo tee -a /etc/apt/sources.list.d/grafana.list
+ [[ $OPSYS == *"UBUNTU"* ]] && echo "deb https://packages.grafana.com/oss/deb stable main" | sudo tee -a /etc/apt/sources.list.d/grafana.list
+ sudo apt-get $AQUIET -y remove --purge grafana grafana-data 2>&1 | tee -a $LOGFILE
+ sudo rm -rf /var/log/grafana /etc/grafana
+ sudo apt-get $AQUIET -y autoremove 2>&1 | tee -a $LOGFILE
+ sudo apt-get $AQUIET -y update 2>&1 | tee -a $LOGFILE
+ sudo apt-get install $AQUIET -y influxdb grafana chronograf 2>&1 | tee -a $LOGFILE
+ [ $? -eq 0 ] && grafana=1 # grafana installed
+ if [ $grafana -eq 1 ]; then
+ #sudo sed -i -e 's/.*auth-enabled = false/ auth-enabled = true/g' /etc/influxdb/influxdb.conf
+ sudo systemctl daemon-reload 2>&1 | tee -a $LOGFILE
+ sudo systemctl enable influxdb 2>&1 | tee -a $LOGFILE
+ sudo systemctl start influxdb 2>&1 | tee -a $LOGFILE
+ sudo systemctl enable grafana-server 2>&1 | tee -a $LOGFILE
+ sudo systemctl start grafana-server 2>&1 | tee -a $LOGFILE
+ sudo systemctl enable chronograf 2>&1 | tee -a $LOGFILE
+ sudo systemctl start chronograf 2>&1 | tee -a $LOGFILE
+ printl "${IRed}!!!! GRAFANA AND INFLUXDB NOT INSTALLED! ${IWhite}\r\n"
+sudo rm -rf /var/cache/apt/archives/apt-fast
+sudo apt-get $AQUIET -y clean 2>&1 | tee -a $LOGFILE
+echo $newhostname | sudo tee /etc/hostname > /dev/null 2>&1
+sudo sed -i '/^127.0.1.1/ d' /etc/hosts > /dev/null 2>&1
+echo 127.0.1.1 $newhostname | sudo tee -a /etc/hosts > /dev/null 2>&1
+sudo /etc/init.d/hostname.sh > /dev/null 2>&1
+#printstatus "Installing Glances"
+#sudo apt-get -y install python{,3}-setuptools 2>&1 | tee -a $LOGFILE
+#sudo pip install glances 2>&1 | tee -a $LOGFILE
+#sudo pip install bottle 2>&1 | tee -a $LOGFILE
+printf "${BIGreen}== ${BIYELLOW}When complete, remove the script from the /home/pi directory.\r\n"
+printf "${BIGreen}==\r\n"
+printf "${BIGreen}== ${BIPurple}Current IP: %s${BIWhite}\r\n" "$myip"
+printf "${BIGreen}== ${BIPurple}Existing Hostname: %s New Hostname: %s${BIWhite}\r\n\r\n" "$thehostname" "$newhostname"
+echo -e Current IP: $myip Hostname: $thehostname >> $LOGFILE
+echo -e Hostname: $newhostname >> $LOGFILE
+echo -e NPM: $(npm -v) >> $LOGFILE
+echo -e PHP: $(php -v) >> $LOGFILE
+echo -e NODE: $(node -v) >> $LOGFILE
+echo -e MQTT: $(/usr/sbin/mosquitto --help | grep version) >> $LOGFILE
+sudo grep -h ^deb /etc/apt/sources.list /etc/apt/sources.list.d/* 2>&1 >> $LOGFILE
+echo "alias space='df -h|grep -v udev|grep -v tmpfs|grep -v run'" | sudo tee -a /etc/bash.bashrc > /dev/null 2>&1
+printstatus "ALL DONE - PLEASE REBOOT NOW THEN TEST"
