Commits

Author Commit Message Labels Comments Date
Sergey Vlasov
[PATCH] fetch.c: Remove call to parse_object() from process() The call to parse_object() in process() is not actually needed - if the object type is unknown, parse_object() will be called by loop(); if the type is known, the object will be parsed by the appropriate process_*() function. After this change blobs which exist locally are no longer parsed, which gives about 2x CPU usage improvement; the downside is that there will be no warnings for existing cor…
Sergey Vlasov
[PATCH] fetch.c: Clean up object flag definitions Remove holes left after deleting flags, and use shifts to emphasize that flags are single bits. Signed-off-by: Sergey Vlasov <vsu@altlinux.ru> Signed-off-by: Junio C Hamano <junkio@cox.net>
Sergey Vlasov
[PATCH] fetch.c: Remove redundant test of TO_SCAN in process() If the SEEN flag was not set, the TO_SCAN flag cannot be set, therefore testing it is pointless. Signed-off-by: Sergey Vlasov <vsu@altlinux.ru> Signed-off-by: Junio C Hamano <junkio@cox.net>
Sergey Vlasov
[PATCH] fetch.c: Remove some duplicated code in process() It does not matter if we call prefetch() or set the TO_SCAN flag before or after adding the object to process_queue. However, doing it before object_list_insert() allows us to kill 3 lines of duplicated code. Signed-off-by: Sergey Vlasov <vsu@altlinux.ru> Signed-off-by: Junio C Hamano <junkio@cox.net>
Sergey Vlasov
[PATCH] fetch.c: Remove redundant TO_FETCH flag The TO_FETCH flag also became redundant after adding the SEEN flag - it was set and checked in process() to prevent adding the same object to process_queue multiple times, but now SEEN guards against this. Signed-off-by: Sergey Vlasov <vsu@altlinux.ru> Signed-off-by: Junio C Hamano <junkio@cox.net>
Sergey Vlasov
[PATCH] fetch.c: Remove redundant SCANNED flag After adding the SEEN flag, the SCANNED flag became obviously redundant - each object can get into process_queue through process() only once, and therefore multiple calls to process_object() for the same object are not possible. Signed-off-by: Sergey Vlasov <vsu@altlinux.ru> Signed-off-by: Junio C Hamano <junkio@cox.net>
Sergey Vlasov
[PATCH] fetch.c: Make process() look at each object only once The process() function is very often called multiple times for the same object (because lots of trees refer to the same blobs), but did not have a fast check for this, therefore a lot of useless calls to has_sha1_file() and parse_object() were made before discovering that nothing needs to be done. This patch adds the SEEN flag which is used in process() to make it look at each object only once. …
Sergey Vlasov
[PATCH] fetch.c: Remove useless lookup_object_type() call in process() In all places where process() is called except the one in pull() (which is executed only once) the pointer to the object is already available, so pass it as the argument to process() instead of sha1 and avoid an unneeded call to lookup_object_type(). Signed-off-by: Sergey Vlasov <vsu@altlinux.ru> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano
Do not give alarming error message from rsync in fetch and clone. When we check the optional objects/info/alternates file at the remote repository, we forgot to really squelch error message from rsync. Not having that file is not a crime. Signed-off-by: Junio C Hamano <junkio@cox.net> (cherry picked from 89d844d084f14bc9506f63cd3c9aa44b21b49067 commit)
Jon Loeliger
[PATCH] Retitle 'inspecting what happened' section. In the tutorial, there is a section entitled "Checking it out" that shows how to use diff log and whatchanged to insect some of the repository state. As the phrase "checkout" ususally carries some baggage WRT other revision control mechanism, I suggest that we re-title this section something like "Inspecting Changes". Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Junio C Hamano …
Junio C Hamano
Prettyprint octopus merge message. Including the current branch in the list of heads being merged was not a good idea, so drop it. And shorten the message by grouping branches and tags together to form a single line. Signed-off-by: Junio C Hamano <junkio@cox.net>
Petr Baudis
[PATCH] Verbose git-daemon logging This patch makes git-daemon --verbose log some useful things on stderr - in particular connects, disconnects and upload requests, and in such a way to be able to trace a particular session. Some more errors are now also logged (even when --verbose is not passed). It is still not perfect since messages produced by the non-daemon-specific code are obviously not formatted properly. [jc: With minor f…
Junio C Hamano
Retire diff-helper. The textual diff generation with built-in '-p' in diff-* brothers has proven to be useful enough that git-diff-helper outlived its usefulness. Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano
Retire rev-tree. Some old scripts might still use git-rev-tree, but it really is clearly inferior in every way to git-rev-list that such scripts should be fixed anyway. Fixing them should be pretty easy. Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano
Retire git-export. git-export was done as a concept example on how easy it is to export the git data to something else. It's much less powerful than any number of trivial one-liner scripts now, and real exporters would not ever use git-export. It's obviously much less powerful than "git-whatchanged", or just about any combination of git-rev-list + git-diff-tree. Signed-off-by: Junio C Hamano <junkio@cox.net>
Linus Torvalds
[PATCH] Fix strange timezone handling We generate the ASCII representation of our internal date representation ("seconds since 1970, UTC + timezone information") in two different places. One of them uses the stupid and obvious way to make sure that it gets the sexagecimal representation right for negative timezones even if they might not be exact hours, and the other one depends on the modulus operator always matching the sign of arg…
Robert Suetterlin
[PATCH] Add new keybindings This adds several new keybindings to allow history and selectline navigation. I basically added Opera-like history traversal, as well as left-right-cursor history traversal and vi-like motion commands. Signed-off-by: Robert Suetterlin <robert@mpe.mpg.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
Junio C Hamano
Revert "Use git-merge instead of git-resolve in git-pull." This reverts f887564ab72e107bcdee3ba83c91e2bb4ae13ca7 commit.
Junio C Hamano
Revert "Make Octopus merge message a bit nicer." This reverts 63f1aa6c72c46928f1b6959437aed4becbc42ff3 commit.
Sergey Vlasov
[PATCH] fetch.c: Remove call to parse_object() from process() The call to parse_object() in process() is not actually needed - if the object type is unknown, parse_object() will be called by loop(); if the type is known, the object will be parsed by the appropriate process_*() function. After this change blobs which exist locally are no longer parsed, which gives about 2x CPU usage improvement; the downside is that there will be no warnings for existing cor…
Sergey Vlasov
[PATCH] fetch.c: Clean up object flag definitions Remove holes left after deleting flags, and use shifts to emphasize that flags are single bits. Signed-off-by: Sergey Vlasov <vsu@altlinux.ru> Signed-off-by: Junio C Hamano <junkio@cox.net>
Sergey Vlasov
[PATCH] fetch.c: Remove redundant test of TO_SCAN in process() If the SEEN flag was not set, the TO_SCAN flag cannot be set, therefore testing it is pointless. Signed-off-by: Sergey Vlasov <vsu@altlinux.ru> Signed-off-by: Junio C Hamano <junkio@cox.net>
Sergey Vlasov
[PATCH] fetch.c: Remove some duplicated code in process() It does not matter if we call prefetch() or set the TO_SCAN flag before or after adding the object to process_queue. However, doing it before object_list_insert() allows us to kill 3 lines of duplicated code. Signed-off-by: Sergey Vlasov <vsu@altlinux.ru> Signed-off-by: Junio C Hamano <junkio@cox.net>
Sergey Vlasov
[PATCH] fetch.c: Remove redundant TO_FETCH flag The TO_FETCH flag also became redundant after adding the SEEN flag - it was set and checked in process() to prevent adding the same object to process_queue multiple times, but now SEEN guards against this. Signed-off-by: Sergey Vlasov <vsu@altlinux.ru> Signed-off-by: Junio C Hamano <junkio@cox.net>
Sergey Vlasov
[PATCH] fetch.c: Remove redundant SCANNED flag After adding the SEEN flag, the SCANNED flag became obviously redundant - each object can get into process_queue through process() only once, and therefore multiple calls to process_object() for the same object are not possible. Signed-off-by: Sergey Vlasov <vsu@altlinux.ru> Signed-off-by: Junio C Hamano <junkio@cox.net>
Sergey Vlasov
[PATCH] fetch.c: Make process() look at each object only once The process() function is very often called multiple times for the same object (because lots of trees refer to the same blobs), but did not have a fast check for this, therefore a lot of useless calls to has_sha1_file() and parse_object() were made before discovering that nothing needs to be done. This patch adds the SEEN flag which is used in process() to make it look at each object only once. …
Sergey Vlasov
[PATCH] fetch.c: Remove useless lookup_object_type() call in process() In all places where process() is called except the one in pull() (which is executed only once) the pointer to the object is already available, so pass it as the argument to process() instead of sha1 and avoid an unneeded call to lookup_object_type(). Signed-off-by: Sergey Vlasov <vsu@altlinux.ru> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano
Merge branch 'fixes'
Junio C Hamano
Fix documentation dependency. Randal L. Schwartz noticed that 'make install' does not rebuild what is installed. Make the 'install' rule depend on 'man'. I noticed also 'touch' of the source files were used to express include dependencies, which is a no-no. Rewrite it to do dependencies properly, and add missing include dependencies while we are at it. Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano
Make object creation in http fetch a bit safer. Unlike write_sha1_file() that tries to create the object file in a temporary location and then move it to the final location, fetch_object could have been interrupted in the middle, leaving a corrupt file. Signed-off-by: Junio C Hamano <junkio@cox.net>
  1. Prev
  2. Next