Kenwood D710 Support

[Weston Bustraan]

1. Connect the radio to the Mac via serial to USB adapter.
2. Set the radio to PACKET12 mode, with the external data band set to B-Band. Set the B band frequency to 144.39.
3. In QTH create a new KISS Serial TNC connection.
4. Set the port to whatever the serial adapter shows up as ("usbserial-FTC8HWWF" for mine), the device to Generic, and the Baud to 9600.
5. Save the new connection and turn it on with TX off.
6. Notice that nothing is received and nothing shows up in the log.
7. Now turn on TX and send a beacon.
8. Notice that nothing is sent, and the following shows up in the log:

17:50:06.700 DEBUG APRSManagerImpl.transmit():147 - Posting packet for transmit
17:50:06.704 DEBUG APRSConnection.didTransmit():171 - Transmitted 6 packets
17:50:06.721 DEBUG GenericDeviceExtension.handleIncomingMessage():29 - T 21 €€€€ €ø€€ €øø€ø€€x€ € €x €  €x  € €€€€ € €x € xø €xø€ø xøø €xø€ €x x xxx   € € € €øøx x€ € €€€€ € €x € ø xøø €xø€ € €
17:50:06.800 WARNING APRSManagerImpl.receive():71 - Could not decode packet specViolation("Encountered AX.25 control: 240")