Crash when imaging with Atik Horizon II camera

Issue #1210 duplicate
Didier PEYRET created an issue

I 'm experiencing recurrent crash when doing the following:

Open NINA with my equipment profile : OK
Connect the Atik Horizon II camera and set sensor temperature to -5°C (for example, just to verify the camera control) : OK
Connect Atik EFW2: OK
Go to Imaging screen and launch a 3 sec (for example) exposure with a filter change. After moving to the desired filter the exposure starts, then the progression bar freeze for a few seconds and NINA shutdown.

I’m running NINA v 2.1.1.3003 on Windows 10 Family (22H2). Ascom drivers are version 6.6SP1.

Unfortunately I just noticed that during the last occurrence the log file is almost empty. It contains only the header lines.
I have the ‘NINA.exe.xxxx.dmp’ file corresponding to the latest crash at disposal, but it is 1.0 Go !

Comments (2)

  1. Didier PEYRET reporter

    To be sure I de-installed and re-installed all Atik drivers from their web site. The version of the camera driver did not change (4.1.0.1) but the date changed from 08/20/2020 to 05/31/2022.

    A first imaging test resulted in a crash, but one step ahead: ie. during debayering. I changed the imaging option to ‘Debayer image OFF’ and so far it’s working. BUT the image display is completely white, for and exposure with the cap on the telescope (test during day time)…

  2. Log in to comment