Wiki

[1.2.x firmware]

There are global settings associated with the Vertical Sliders. Global values are in the JSON as VSliders→property. In the sysex, global parameters for all sensor sections are clustered together in a single QuNeo Sysex Global Block.

For the Vertical slider sensors, the following values are added to the sysex. JSON property is in the presets file at VSliders→VSliderX→property.

Value	JSON property	Note
Bank 1 Channel	vB1Channel
Bank 1 Location	vB1outLocation
Bank 1 Note	vB1outNote
Bank 1 Pressure Mode	vB1outNotePressMode	0=Normal, 1=Toggle
Bank 1 Pressure CC	vB1outPress	-1=Off
Bank 1 Pressure Value	vB1outPressValue	0=Continuous
Bank 1 Velocity	vB1outVelocityValue	0=Variable
Bank 1 Location Pass Thru Range	vB1outLocPassThruRange

Bank 2 Channel	vB2Channel
Bank 2 Location	vB2outLocation
Bank 2 Note	vB2outNote
Bank 2 Pressure Mode	vB2outNotePressMode	0=Normal, 1=Toggle
Bank 2 Pressure CC	vB2outPress	-1=Off
Bank 2 Pressure Value	vB2outPressValue	0=Continuous
Bank 2 Velocity	vB2outVelocityValue	0=Variable
Bank 2 Location Pass Thru Range	vB2outLocPassThruRange

Bank 3 Channel	vB3Channel
Bank 3 Location	vB3outLocation
Bank 3 Note	vB3outNote
Bank 3 Pressure Mode	vB3outNotePressMode	0=Normal, 1=Toggle
Bank 3 Pressure CC	vB3outPress	-1=Off
Bank 3 Pressure Value	vB3outPressValue	0=Continuous
Bank 3 Velocity	vB3outVelocityValue	0=Variable
Bank 3 Location Pass Thru Range	vB3outLocPassThruRange

Bank 4 Channel	vB4Channel
Bank 4 Location	vB4outLocation
Bank 4 Note	vB4outNote
Bank 4 Pressure Mode	vB4outNotePressMode	0=Normal, 1=Toggle
Bank 4 Pressure CC	vB4outPress	-1=Off
Bank 4 Pressure Value	vB4outPressValue	0=Continuous
Bank 4 Velocity	vB4outVelocityValue	0=Variable
Bank 4 Location Pass Thru Range	vB4outLocPassThruRange